MOOG servo valve D633-317B in stock

Brand: MOOG (USA)

Application Areas: Medical & Health, Environmental Protection, Food/Agricultural Products, Agriculture, Forestry, Animal Husbandry & Fishery, Comprehensive

MOOOG Servo Valve Working Principle: The MOOG servo valve consists of a permanent magnet torque motor, nozzle, baffle, valve core, valve sleeve, and control chamber. When current is applied to the input coil, the baffle moves to the right, strengthening the throttling effect of the right nozzle, reducing the flow rate, and increasing the back pressure on the right side; simultaneously, it reduces the throttling effect of the left nozzle, increasing the flow rate, and decreasing the back pressure on the left side. The forces at both ends of the valve core become unbalanced, causing the valve core to move to the left. High-pressure oil flows from S to C2, delivering it to the load. Load return oil flows through C1 through the return port and enters the oil tank. The displacement of the valve core is proportional to the input current of the torque motor. The hydraulic pressure acting on the valve core is balanced by the spring force; therefore, in equilibrium, the differential current of the torque motor is proportional to the displacement of the valve core. If the input current is reversed, the flow rate is also reversed. The table shows the classification of servo valves.

MOOG servo valves are primarily used as actuators in electro-hydraulic servo systems (see Hydraulic Servo Systems). In servo systems, hydraulic actuators, compared to electro- and pneumatic actuators, offer advantages such as faster response times, higher power output per unit weight, smoother transmission, and stronger anti-interference capabilities. Conversely, electrical components are often used for signal transmission and characteristic correction in servo systems. Therefore, modern high-performance servo systems also employ electro-hydraulic methods, and servo valves are essential components of such systems.

MOOG servo valves mainly refer to electro-hydraulic servo valves, which, upon receiving analog electrical signals, output modulated flow and pressure. They act as both electro-hydraulic conversion elements and power amplifiers, converting low-power, weak electrical input signals into high-power hydraulic energy (flow and pressure) output.

Founded over fifty years ago, MOOG initially designed and supplied aircraft and components. Today, the company's motion control technology is widely used in numerous markets and applications, including civil aircraft cockpits, wind turbines, Formula One racing, and medical infusion systems, effectively improving the performance of related products. The company's history dates back to its founder, William C. Moog, an inventor, entrepreneur, and visionary. In 1951, Bill Moog developed the electro-hydraulic servo valve, a device that converts weak electrical pulses into precise and powerful motion. In July 1951, Bill Moog, the Art brothers, and Lugheye rented a corner of the abandoned Proner Airport in East Aurora, New York, and founded the MOOG Valve Company.

Moog is a global designer, manufacturer, and integrator of precision motion control products and systems. Moog's high-performance systems control commercial aircraft, satellites and spacecraft, launch vehicles, industrial machinery, wind power, marine applications, and medical equipment.

MOOG servo valve

D662-4006/D02HEBF6NSF2-B

D662-4102

D662-4799

D662-4724

D662-P01JAMF6VSX2-A

D662-4014

D662-4014

D662-3710E

D662Z4310K/P02JXMF6VSX2-A

D662-4010

D662-4337K/P02HAMF6VSX2-A

D662-4127

D662-4011

D662-4050

D662-4015

D662-4355K

D662-4002

D662Z397K

D662Z4109 D662-4709/D02HYBW5NSX4-O

D662-4010

D662-5399

D662Z4336KP01JXMF6VSX2-A

D662-4307K

D662-Z4334K/P01JOMF6VSX2-A(24VDC)

D662-4013/D02HXAD6NSM2-O

D662-4087

D662-4032

D662-4106B/D02HABF5VSD2-A

D662-4005/D01HABF6VSX2-B

D633Z371B

D633-7414

D633-7115

D633-317B D633-308B

D633-302B

D633-7243

D633-471B

D633-525B

D633-204

D633-333B

D633-231A replaced by D633-375B

D633-7398

D633-R16KO1MOVSS2

D633-498B

D633-509B

D633-303B (5L flow rate) R02KO1M0NSM2

D633-317B (10L flow rate) R04KO1M0NSM2

D633-308B (20L flow rate) R08KO1M0NSM2

D633-313B (40L flow rate) R16KO1M0NSM2 D633-312B/R08K01MONSS2

D633-442B-RO2KO1FONSS2

D633-526B/R02KO1DONSP2

D633-419B/R16KO1FONSP2

D633-473B/R08K01F0VSX2

D633-500B/R02K01MOVSX2

D633-314A/E02K01M0NSP2

D633-333B-R16KO1FONSS2

D633-442B-R16KO1DOVSS2

D633-R04KO1MOVSS2

D633-D2500B/RXXKX1FONSS2

D633-D2501B/R04KD1MONSM2 D633-362B/R16KO1F0NSM2

Our company primarily deals in European and American brands, and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, HIRSCHMANN industrial switches, Henschler, MURR, SCHMERSAL, SAMSON, and EPRO (a subsidiary of Emerson).

We also source American brands such as MOOG, ASCO solenoid valves, MAC solenoid valves, NUMATICS, PARKER pneumatics and hydraulics, VICKERS, and ROSS. Norgren (UK)

OMAL (Italy), ATOS (Italy), CAMOZZI (Italy), UNIVER (Italy), and Kronospan (Italy) Our business scope includes:

Hydraulic components:

Solenoid directional valves, directional valves, check valves, stack valves, relief valves, counterbalancing valves, proportional valves, manual directional valves, flow valves, pressure reducing valves,

Throttle valves, pressure control valves, back pressure valves, filling valves, flow dividers, shuttle valves, pressure relays, cartridge valves, pneumatic valves, piston pumps,

Gear pumps, vane pumps, cycloidal hydraulic motors, oil coolers, hydraulic cylinders, etc.;

Pneumatic components:

Air source processor assemblies, filters, pressure regulating valves, lubricators, solenoid valves, pneumatic valves, angle seat valves, manual valves, pull valves, foot valves,

Mechanical valves, check valves, vacuum generators, cylinders, magnetic switches, shock absorbers, pressure gauges, quick couplings, floating couplings,

Pressure gauge switches, water coolers, electric positioners, PU tubing, vacuum suction cups, oil filters, vibrators;

Electrical components include:

Relays, sensors, converters, proximity switches, encoders, programmable controllers;

The company maintains a large inventory, with standard parts readily available. To better serve customers in various industries, the company also distributes other spare parts, with professional sourcing channels and reasonable prices.

The company's products are widely used in industrial machinery, machine tools, plastic machinery, shoe machinery, brick machinery, metallurgy, mining, chemical industry, papermaking, coal mining, shipbuilding, etc.