ATOS solenoid valve DHI-0751/2/FI/NC-X in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Chemical, Petroleum, Mining, Road/Rail/Marine, Comprehensive

ATOS Piston Pumps, ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders

ATOS solenoid valves are electromagnetically controlled industrial devices, fundamental components for fluid control in automation. They are actuators, not limited to hydraulic or pneumatic systems. Used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each playing a different role in the control system. Commonly used types include check valves, safety valves, directional control valves, and speed control valves.

ATOS Solenoid Valve Selection Considerations:

ATOS solenoid valve selection should first follow four principles in order: safety, reliability, applicability, and economy. Secondly, it should be based on six aspects of the on-site operating conditions (i.e., pipeline parameters, fluid parameters, pressure parameters, electrical parameters, actuation method, and special requirements).

ATOS Solenoid Valve Selection Basis:

1. Selecting the solenoid valve based on pipeline parameters: nominal diameter (DN) and connection type

1) Determine the nominal diameter (DN) based on the on-site pipeline inner diameter or flow requirement;

2) For the connection type, generally, >DN50 requires a flange connection, while ≤DN50 can be freely selected according to user needs.

2. Selecting Solenoid Valves Based on Fluid Parameters: Material and Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel valves are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves are preferred.

3) Fluid state: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN25, these must be clearly distinguished.

4) Fluid viscosity: Generally, any viscosity can be selected below 50 cSt. If it exceeds this value, a high-viscosity solenoid valve should be selected.

3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structural Types

1) Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined by the nominal pressure of the pipeline.

2) Working pressure: If the working pressure is low, a direct-acting or step-direct-acting principle valve must be selected; when the minimum working pressure difference is above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected. 4. Electrical selection: For voltage specifications, AC220V and DC24V should be prioritized for convenience.

5. Select based on continuous working time: Normally closed, normally open, or continuously powered.

DHI-0630/2/A-X 230/50/60AC 23

DHI-0630/2/A-X 24DC 23

DHI-0630/2-X 24DC

DHI-0631/1/2/A-X 24DC

DHI-0631/2/A-IX 24DC

DHI-0631/2/A-X 110/50/60AC 23

DHI-0631/2/A-X 230/50/60AC 23

DHI-0631/2/P-X 24DC

DHI-0631/2/WP-X 12DC 23

DHI-0631/2/WP-X 220DC 23 DHI-0631/2/WP-X 230/50/60AC

DHI-0631/2P/A-X 24DC

DHI-0631/2P-X 24DC

DHI-0631/2-X 230/50/60AC

DHI-0713-X 110/50/60AC

DHI-0713-X 230/50/60AC

DHI-0713-X 24DC

DHI-0713-X 24DC 23/PE

DHI-0714/WP-X 230/50/60AC

DHI-0714/WP-X 230/50/60AC 23 /PE

DHI-0714-X 230/50/60AC

DHI-0714-X 24DC DHI-0715/FI/NC-X 24DC

DHI-0715-X 24DC

DHI-0716-X 24DC

DHI-0717-X 24DC

DHI-0718-X 230/50/60AC

DHI-0718-X 24DC

DHI-0750/2-X 24DC

DHI-0751/2/FI/NC-X 24DC 23

DHI-0751/2/FI/NO-X 24DC 23

DHI-0751/2/WP-X 230/50/60AC

DHI-0751/2/WP-X 230/50/60AC 23/PE

DHI-0751/2/WP-X 24DC

DHI-0751/2-X 110/50/60AC 23

DHI-0751/2-X 230/50/60AC

DHI-0751/2-X 24DC

DHO-0630/2/A-X 24DC 20

DHO-0631/2/A-X 24DC 20

DHO-0631/2/L1-X 24DC 20

DHO-0631/2-X 24DC

DHO-0639/O-X 24DC 20

DHO-0710-X 24DC 20

DHO-0711-X 24DC

DHO-0713-X 24DC 20 The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi