Italian ATOS proportional valve DPZO-LE-271-L5/D in stock

Brand

ATOS/Italian Atos

ATOS proportional valves control flow in two ways: On-off control and servo control. On-off control means the valve is either fully open or fully closed, with flow either at its maximum or minimum, without intermediate states. Examples include common solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. Continuous control allows the valve to open to any desired degree, thus controlling the flow rate. These valves can be manually controlled (e.g., throttle valves) or electrically controlled (e.g., proportional valves and servo valves). Therefore, the purpose of using proportional or servo valves is to achieve throttling control of flow rate electrically (pressure control can also be achieved through structural modifications). Since it's throttling control, there is inevitably energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the upstream control circuit.

Difference between ATOS Servo Valves and Proportional Valves

There is no strict definition of the difference between servo valves and proportional valves. As the performance of proportional valves has improved, they are gradually approaching that of servo valves, leading to the emergence of proportional servo valves in recent years.

Differences between ATOS proportional valves and servo valves:

The main differences are as follows:

1. Different drive devices: Proportional valves are driven by proportional electromagnets; servo valves are driven by force motors or torque motors.

2. Different performance parameters: Hysteresis, dead zone, bandwidth, and filtration accuracy differ, leading to different applications. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other types of proportional valves are mainly used in open-loop control systems and closed-loop speed control systems.

2.1 Servo valves have no dead zone at mid-position, while proportional valves do.

2.2 Servo valves have a higher frequency response, reaching up to approximately 200Hz, while proportional valves generally have a maximum frequency of tens of Hz.

2.3 Servo valves have higher requirements for hydraulic fluid, requiring fine filtration to prevent clogging, while proportional valves have lower requirements.

3. Different valve core structures and machining precision: Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure. 4. Different Neutral Position Functions. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Different Rated Pressure Drops.

ATOS proportional servo valves offer performance between servo valves and proportional valves.

ATOS proportional directional valves are a type of proportional valve used to control flow rate and direction.

Extended Information---Automatic control of electrical proportional valves can be divided into intermittent control and continuous control. Intermittent control is on/off control. Pneumatic control systems use on/off directional valves with low operating frequencies to control the airflow. Pressure reducing valves regulate the required pressure, and throttle valves regulate the required flow rate. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by an output that changes proportionally to the input, with a certain proportional relationship between the two. Proportional control can be divided into open-loop control and closed-loop control.

ATOS proportional valve stock list:

DHZO-AE-073-S5/I 10

DHZO-AT-073-P3 20

DHZO-ATE-073-P3/B/DP27SB 20

DHZO-T-051-L1

DHZO-T-051-L5 31

DHZO-T-071-D5

DHZO-T-071-L5

DHZO-T-071-S5

DHZO-TE-051-L5/Y 40

DHZO-TE-071-L5

DHZO-TE-071-S5 40/PE

DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7

DKZO-A-151-S5 DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40

DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5

DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5

DKZOR-A-173-L5

DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y The company mainly produces European and American brands. We can source brands from any European country, including leading German brands such as: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi