ATOS proportional valve DHRZO-P5E-012/25 in stock

Brand

ATOS/Italian Atos

Thank you for your interest in our products. If you would like to learn more, such as ATOS product prices, specifications, and other information, please feel free to contact us. We sincerely invite you to experience our satisfactory service!

ATOS Piston Pumps, ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders, ATOS Relief Valves, ATOS Proportional Valves, ATOS Stack Valves

Differences between ATOS Proportional Valves and Servo Valves:

ATOS proportional valves differ mainly in the following ways:

1. Different drive devices. The drive device for a proportional valve is a proportional electromagnet; the drive device for a servo valve is a force motor or torque motor;

2. Different performance parameters. 2.1 Servo valves have no dead zone in the neutral position, while proportional valves do. Therefore, their applications differ. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other proportional valve structures are mainly used in open-loop control systems and closed-loop speed control systems.

2.2 Servo valves have a higher frequency response (response frequency), reaching up to around 200Hz, while proportional valves generally have a maximum frequency of tens of Hz.

2.3 Servo valves have higher requirements for hydraulic fluid, requiring fine filtration to prevent clogging, while proportional valves have lower requirements.

3. Valve core structure and machining precision differ. Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure.

4. Neutral position functions differ. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Rated pressure drop differs.

ATOS proportional valves offer performance between servo valves and proportional valves.

ATOS proportional valves are a type of proportional valve used to control flow rate and direction.

Extended information on ATOS proportional valves: Automatic control of electro-proportional valves can be divided into intermittent control and continuous control. Intermittent control is also known as on-off control. Pneumatic control systems use on-off (ON-OFF) directional valves with low operating frequencies to control the opening and closing of the air path. Pressure reducing valves regulate the required pressure, and throttle valves regulate the required flow rate. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by the output changing with the input, and a certain proportional relationship exists between the output and input. Proportional control is divided into open-loop control and closed-loop control.

ATOS Proportional Valve Structure and Principle

When the input signal to the ATOS proportional valve increases, the pilot valve 1 of the supply solenoid valve switches, while the exhaust solenoid pilot valve 7 remains in the reset state. The supply pressure then enters the pilot chamber 5 from the SUP port through valve 1. The pilot chamber pressure rises, and this pressure acts on the diaphragm 2, opening the supply valve core 4 connected to diaphragm 2 and closing the exhaust valve core 3, generating output pressure. This output pressure is fed back to the control circuit 8 via pressure sensor 6.

ATOS Proportional Valve Features

1) Enables stepless adjustment of pressure and speed, avoiding the impact phenomenon during switching of normally open on/off valves.

2) Enables remote and program control.

3) Compared to intermittent control, the system is simplified, and the number of components is greatly reduced.

4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower than hydraulic systems, and it is more sensitive to load changes.

5) Low power consumption, low heat generation, and low noise. 6) It will not cause a fire and will not pollute the environment. It is minimally affected by temperature changes.

ATOS proportional valves can control flow in two ways: one is on/off control: either fully open or fully closed, the flow is either at its maximum or minimum, with no intermediate state, such as ordinary solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. The other is continuous control: the valve port can be opened to any degree as needed, thereby controlling the flow rate. These valves can be manually controlled, such as throttle valves, or electrically controlled, such as proportional valves and servo valves. Therefore, the purpose of using proportional valves or servo valves is to achieve throttling control of flow rate through electrical control (of course, pressure control can also be achieved through structural modifications). Since it is throttling control, there will inevitably be energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the upstream control circuit.

ATOS proportional valve

DHZO-TE-071-S5 40/PE

DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7

DKZO-A-151-S5

DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40

DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5

DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5 DKZOR-A-173-L5

DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y

DKZOR-A-173-S3

DKZOR-A-173-S5

DKZOR-A-173-S5/18

DKZOR-AE-171-L5 10

DKZOR-AE-171-S5

DKZOR-AE-171-S5 10/WG

DKZOR-AE-171-S5/Y 10

DKZOR-AE-173-D5 10

DKZOR-AE-173-L5 10

DKZORC-A-151-S5/18

Our company has many European and American brands that can be directly sourced from overseas.

Short delivery time, low prices, self-declaration of customs. New and existing customers are welcome to inquire and purchase!

Our business scope includes:

Hydraulic components:

Solenoid directional valves, directional valves, check valves, stack valves, relief valves, counterbalancing valves, proportional valves, manual directional valves, flow valves, pressure reducing valves,

Throttle valves, pressure control valves, back pressure valves, filling valves, flow dividers, shuttle valves, pressure relays, cartridge valves, pneumatic valves, piston pumps,

Gear pumps, vane pumps, cycloidal hydraulic motors, oil coolers, hydraulic cylinders, etc.;

Pneumatic components:

Air source processor assemblies, filters, pressure regulating valves, oil feeders, solenoid valves, pneumatic valves, angle seat valves, manual valves, hand-operated valves, foot valves,

Mechanical valves, check valves, vacuum generators, cylinders, magnetic switches, shock absorbers, pressure gauges, quick couplings, floating couplings,

Pressure gauge switches, water coolers, electric positioners, PU tubing, vacuum suction cups, oil filters, vibrators;

Electrical components:

Relays, sensors, converters, proximity switches, encoders, programmable logic controllers (PLCs); The company maintains a large inventory, with standard parts readily available. To better serve customers across various industries, the company also distributes other spare parts, utilizing professional sourcing channels and offering reasonable prices.

The company's products are widely used in industrial machinery, machine tools, plastics machinery, shoe machinery, brick machinery, metallurgy, mining, chemical industry, papermaking, coal industry, shipbuilding, power generation, construction machinery, environmental protection machinery, and many other fields.