METRIX transmitter ST5484E-121-0532-00 in stock.

Brand

METRIX/USA

Price Range

Negotiable

Origin

Imported

Applications

Chemical, Petroleum, Mining, Road/Rail/Marine, General

METRIX transmitters are converters that transform the output signal of a sensor into a signal that can be recognized by a controller (or convert non-electrical quantities input by a sensor into electrical signals and amplify them for remote measurement and control). Sensors and transmitters together constitute the monitoring signal source for automatic control. Different physical quantities require different sensors and corresponding transmitters. There are many types of transmitters; those used in industrial control instruments mainly include temperature transmitters, pressure transmitters, flow transmitters, current transmitters, voltage transmitters, etc.

METRIX transmitters are converters that transform the output signal of a sensor into a signal that can be recognized by a controller (or convert non-electrical quantities input by a sensor into electrical signals and amplify them for remote measurement and control). Sensors and transmitters together constitute the monitoring signal source for automatic control. Different physical quantities require different sensors and corresponding transmitters. There are many types of transmitters. Transmitters used in industrial control instruments mainly include temperature transmitters, pressure transmitters, flow transmitters, current transmitters, voltage transmitters, and so on.

Metrix Corporation, founded in 1965 and located in Houston, USA, is a company that manufactures 4-20mA vibration transmitters, greatly simplifying vibration monitoring and reducing costs. Our products and services include eddy current systems, transmitters, switches, monitors, portable displays, and global technical services, including mechanical diagnostics, commissioning, balancing, and troubleshooting. Our vibration monitoring products are used in gas turbines, motors, compressors, pumps, generators, gearboxes, papermaking machinery, and cooling towers. Metrix's product line is suitable for numerous industries, including air separation, chemical, oil and gas, pipeline, power generation, water/wastewater treatment, and many more. Non-contact eddy current sensors are mainly used to measure shaft vibration, axial displacement, eccentricity, differential expansion, key phase, and zero speed. Speed ​​sensors and acceleration sensors are mainly used to measure bearing vibration, etc. Application Principles of METRIX Pressure Transmitters (USA)

METRIX pressure transmitters are among the most commonly used sensors in industrial practice. They are widely applied in various industrial automation environments, including water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military, petrochemicals, oil wells, power, shipbuilding, machine tools, pipelines, and many other industries. Below is a brief introduction to the principles and applications of some commonly used pressure transmitters. Pressure transmitters are used to measure the level, density, and pressure of liquids, gases, or vapors, and then convert the pressure signal into a 4–20mA DC signal output.

METRIX pressure transmitters mainly include capacitive pressure transmitters, diffused silicon pressure transmitters, ceramic pressure transmitters, and strain gauge pressure transmitters. Based on the pressure measurement range, pressure transmitters can be divided into three types: general pressure transmitters (0.001MPa–35MPa), differential pressure transmitters (0–1.5kPa), and negative pressure transmitters.

The main function of the American METRIX pressure transmitter is to transmit pressure signals to electronic equipment, which then displays the pressure on a computer. Its principle is roughly as follows: it converts the mechanical signal of water pressure into an electronic signal of current (4-20mA). Pressure and voltage or current have a linear relationship, generally a direct proportional relationship. Therefore, the voltage or current output by the transmitter increases with increasing pressure, thus deriving a relationship between pressure and voltage or current. The two pressures of the measured medium in the pressure transmitter are introduced into high and low pressure chambers. The low pressure chamber uses atmospheric pressure or vacuum, acting on the diaphragms on both sides of the δ element (i.e., the sensitive element), and transmitted to both sides of the measuring diaphragm through the insulating plates and the filling fluid within the element.

The American METRIX pressure transmitter consists of a measuring diaphragm and electrodes on the insulating plates on both sides, each forming a capacitor. When the pressures on both sides are inconsistent, the measuring diaphragm is displaced. The amount of displacement is proportional to the pressure difference, resulting in unequal capacitances on both sides. This is addressed through oscillation and demodulation... METRIX vibration transmitter ST5484E-151-020-00 probe equipment vibration transmitter, ST5484E vibration transmitter, 5550 vibration switch ST5484E-151-010-00 ST5484E-132-520-00 ST5484E-132-540-00 ST5484E-132-432-00 ST5484E-132-421-00 162VTS extended vibration transmitter, 5485C high temperature velocity sensor, 5534-5544 signal Signal transducer transmitter, 5535-5545 signal transducer transmitter, IT6810 impact transducer, IT6811 impact transducer, IT1682 impact transducer, SA6200A industrial accelerometer, SA6250 vibration sensor, SA6350 high-temperature accelerometer, ST5484E vibration sensor, ST5491E digital display vibration transducer, ST6900 compact vibration transducer, ST6911 vibration sensor, SV6300A piezoelectric velocity sensor, 6850-001 impact display instrument. The METRIX vibration transmitters ST5484E-121-010-00, ST5484E-121-011-00, ST5484E-121-012-00, and ST5484E-121-013-00 are for shaft vibration. The TXR-72500 and TXA transmitters are for shaft displacement. The TXA-72500, TXR-725-00, TXR-725-03, TXR-725-04, TXR-725-05, TXR-725-00, TXR-725-90, TXR-725-93, TXR-725-94, TXR-725-95, TXR-725-90, TXA-725-00, and TXA-729-00 are upgrades to the original 5465E and 5488E products. 5533-0035533-0045533-1035533-104

ST5484E-151-010-00

ST5484E-132-520-00

ST5484E-132-540-00

ST5484E-132-432-00

ST5484E-132-421-00

ST5484E-121-010-00

ST5484E-121-011-00

ST5484E-121-012-00

ST5484E-121-013-00

ST5484E-151-010-00

ST5484E-132-520-00 ST5484E-132-540-00

ST5484E-132-432-00

ST5484E-132-421-00

ST5484E-151-132-00/8200-001

Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi