Italian Eltra encoder EL58B2500Z5L6S3JR in stock
$392.22
Italian Eltra encoders are available in various mounting methods, including those for auxiliary mechanical devices. High-speed mounting: This method involves mounting the encoder on the motor shaft (or via gear connection). The advantage of this method is high resolution; since multi-turn encoders have 4096 turns, the motor's rotation count falls within this range, fully utilizing the range to improve resolution. The disadvantage is that backlash error occurs during the reciprocating motion of the moving object after passing through the reduction gear. This method is generally used for unidirectional high-precision control and positioning, such as roll gap control in steel rolling. Additionally, when the encoder is directly mounted on the high-speed end, motor vibration must be minimized to avoid damaging the encoder.
Brand
ELTRA/Italy
Origin Category
Imported
Application Areas
Chemical, Petroleum, Mining, Road/Rail/Marine, General
Common Eltra Encoder Faults:
1. Encoder Intrinsic Fault: This refers to a fault in the encoder's components,
causing it to fail to generate and output the correct waveform. In this case, the encoder needs to be replaced or its internal components repaired.
2. Encoder Connection Cable Fault: This is the most common fault and frequently encountered during repairs, and should be the first factor considered. It is usually caused by an open circuit, short circuit, or poor contact in the encoder cable. In this case, the cable or connector needs to be replaced. Special attention should also be paid to whether the cable is loosely secured, causing a break in the solder joint or an open circuit; in this case, the cable needs to be tightened.
3. Encoder +5V Power Drop: This refers to a +5V power supply that is too low. It should generally not be lower than 4.75V. The cause of a low voltage is a power supply fault or excessive resistance in the power transmission cable, leading to power loss. In this case, the power supply needs to be repaired or the cable replaced. 4. Absolute encoder battery voltage drop: This fault usually has a clear alarm meaning.
In this case, the battery needs to be replaced. If the reference point position memory is lost, a return-to-reference-point operation must also be performed.
5. Encoder cable shield not connected or detached: This will introduce interference signals, making the waveform unstable and affecting the accuracy of communication. Reliable soldering and grounding of the shield wire must be ensured.
6. Loose encoder installation: This fault will affect the position control accuracy, causing excessive position deviation during stopping and movement, and may even trigger a servo system overload alarm immediately upon power-on. Please pay special attention.
7. Grating contamination: This will reduce the signal output amplitude. Oil stains must be gently wiped away with a cotton swab soaked in grease.
Eltra encoders are devices that encode signals (such as bit streams) or data and convert them into a signal form that can be used for communication, transmission, and storage. Encoders convert angular displacement or linear displacement into electrical signals; the former is called the code disk, and the latter is called the code scale. According to the readout method, encoders can be divided into contact and non-contact types; according to the working principle, encoders can be divided into incremental and absolute types. Incremental encoders convert displacement into periodic electrical signals, then convert these signals into counting pulses, using the number of pulses to represent the magnitude of the displacement. Absolute encoders assign a unique digital code to each position, so their reading depends only on the start and end positions of the measurement, and is independent of the intermediate steps.
Eltra, an Italian company, was founded in 1985 and specializes in the development and production of encoders and sensors. Eltra has over 20 years of experience in sensor technology, particularly in the encoder industry. Currently, it produces up to 15,000 different sensor models and serves 3,000 customers worldwide. A comprehensive product range is Eltra's greatest strength, including standard products such as linear encoders and absolute encoders; special products such as wire and magnetic encoders, absolute bus systems, metric encoders, electronic handwheels, intrinsically safe explosion-proof encoders; as well as photoelectric and inductive proximity switches, IDE sensors, linear potentiometers, and related accessories. All Eltreph products undergo rigorous testing under strict conditions for extended periods, ensuring stringent quality control. They have also obtained CE, ISO9001:2000, UL/CSA, and ATEX certifications.
Eltreph's sales network spans the globe, providing our customers with fast, reliable, and high-quality pre-sales and after-sales service.
Applications of Plastic Encoders
Iltron Encoder Inventory List (Italy):
EL40A600Z5/28P6X6PR
EL40A800Z5L6X3PR
EL40A800Z5L6X3PR5
EL40G1000S5/28P6X3PR1
EL42-A1000-Z5 / 28P6-X6PR2
EL42A1000Z5/28P6X6PR2
EL42A1024Z5/28P6X6PR2
EL42A1024Z8/24L6X6PR2
EL42A360Z5/28P6X6PR2
EL42A600Z5/28P6X6PR2
EL48P1000S8/24P8X3PR.8 EL48P2000Z5L8X6PR1.6
EL50FA1024Z5/28L8S3PR
EL50FA1024Z5/28L8X6PR
EL58B1024Z5/28L10X6PR
EL58B1024Z5L10X6PR
EL58B1024Z5L6X3PR
EL58B1024Z5L6X6JR
EL58B1B3600Z5L6X3MR
EL58B2500Z5L6S3JMR
EL58B2500Z5L6S3JR
EL58B2500Z5L6S6JR
EL58B2500Z5L6S6MR
EL58B256S8/24L6X6PR EL58B256Z8/24L6X6PR
EL58C1000S5/28P10X6JR
EL58C1000Z5/28P10S3PR
EL58C1000Z5/28P10X3JR
EL58C1000Z8/24L10S3PR3.002
EL58C1000Z8/24L6X6PR
EL58C1000Z8/24L6X6PR.518
EL58C100S5/28P10X3PR
EL58C1024S5/28P10X3PR
EL58C1024Z5L15X6JR.651
EL58C1024Z8/24L10X6JRwith connector EL58C1024Z8/24L15X6PR.651
EL58C1200Z5L15X6JR.651
EL58C1500Z8/24L10S6PR
EL58C2000S5L10X6PA
EL58C2048Z5/28P10X6PR
EL58C2048Z5L10X3JR
EL58C360I5/28P10X3PR
EL58C360Z5/28P10X3PR
EL58C5000Z 5/28P6X6JR
EL58C5000Z8/24L10X3PR
EL58C720Z5/28P10X3PR EL58CM2048Z8/24L10X3JR
EL58D1024S5L9X6JR
EL58D1024S5L9X6PR
Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)
American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS
British brands: Norgren
Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi
