ATOS proportional valve DPZ0-LEB-SN-NP-271-L5/D in stock

Brand

ATOS/Italian Atos

ATOS Piston Pumps, ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders, ATOS Relief Valves, ATOS Proportional Valves, ATOS Stacking Valves, ATOS Solenoid Valves, ATOS Amplifiers, ATOS Solenoid Directional Valves, ATOS Pressure Reducing Valves, ATOS Safety Valves

Differences between ATOS Proportional Valves and Servo Valves:

Mainly in the following aspects:

1. Different drive devices. The drive device of a proportional valve is a proportional electromagnet; the drive device of a servo valve is a force motor or torque motor;

2. Different performance parameters. 2.1 Servo valves have no dead zone in the neutral position, while proportional valves do. Therefore, their applications differ. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other proportional valve structures are mainly used in open-loop control systems and closed-loop speed control systems.

2.2 Servo valves have a higher frequency response (response frequency), reaching up to around 200Hz, while proportional valves generally have a maximum frequency of tens of Hz.

2.3 Servo valves have higher requirements for hydraulic fluid, requiring fine filtration to prevent clogging, while proportional valves have lower requirements.

3. Valve core structure and machining precision differ. Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure.

4. Neutral position functions differ. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Rated pressure drop differs.

ATOS proportional valves offer performance between servo valves and proportional valves.

ATOS proportional valves are a type of proportional valve used to control flow rate and direction.

Extended information on ATOS proportional valves: Automatic control of electro-proportional valves can be divided into intermittent control and continuous control. Intermittent control is also known as on-off control. Pneumatic control systems use on-off (ON-OFF) directional valves with low operating frequencies to control the opening and closing of the air path. Pressure reducing valves regulate the required pressure, and throttle valves regulate the required flow rate. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by the output changing with the input, and a certain proportional relationship exists between the output and input. Proportional control is divided into open-loop control and closed-loop control.

ATOS Proportional Valve Structure and Principle:

When the input signal to the ATOS proportional valve increases, the pilot valve 1 of the supply solenoid valve switches, while the exhaust solenoid pilot valve 7 remains in the reset state. The supply pressure then enters the pilot chamber 5 through the SUP port and valve 1. The pilot chamber pressure rises, and this pressure acts on the diaphragm 2, opening the supply valve core 4 connected to diaphragm 2 and closing the exhaust valve core 3, generating output pressure. This output pressure is fed back to the control loop 8 via pressure sensor 6. Here, a rapid comparison and correction is performed with the target value until the output pressure is proportional to the input signal, thus demonstrating that the output pressure changes proportionally to the change in the input signal. Because there is no nozzle-baffle mechanism, the valve is insensitive to impurities and has high reliability.

ATOS Proportional Valve Features:

1) Enables stepless adjustment of pressure and speed, avoiding the impact phenomenon during switching of normally open on/off valves.

2) Enables remote and program control.

3) Compared to intermittent control, the system is simplified, and the number of components is greatly reduced. 4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower than that of a hydraulic system, and it is more sensitive to load changes.

5) It uses less power, generates less heat, and produces less noise.

6) It will not cause a fire and will not pollute the environment. It is less affected by temperature changes.

DPZO-A-273-D5/D/G

DPZO-A-273-D5/E30

DPZO-A-273-S5

DPZO-A-371-L5/DG

DPZO-A-373-D5/E30

DPZO-AE-171-S5/E

DPZO-AE-171-S5/E

DPZO-AE-171-S5/G

DPZO-AE-171-S5/G +SP-ZH-7P

DPZO-AE-171-L5/E

DPZO-AE-173-S5

DPZO-AE-271-L5

DPZO-AE-271-L5

DPZO-AE-271-L5

DPZO-AE-273-L5 DPZO-AE-273-L5

DPZO-AE-373-S5

DPZO-AE-373-S5

DPZO-AES-PS-273-L5/IZ

DPZO-TE-173-S5/I

DPZ0-TE-271-L5/D

DPZO-L-271-L3

DPZO-L-273-L5 The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi