Italian ATOS DKI-1671-X solenoid valve in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Environmental Protection, Chemical Industry, Petroleum, Mining, Road/Rail/Marine

ATOS Relief Valve, ATOS Proportional Valve, ATOS Stack Valve, ATOS Solenoid Valve

ATOS Solenoid Valve Wiring Method (Italy):

1. If the solenoid valve wiring is loose or the wire has come loose, the solenoid valve will not receive power. Tighten the wire.

2. If the solenoid valve coil is burnt out, disconnect the wiring and use a multimeter to measure. If it is an open circuit, the solenoid valve coil is burnt out. This can be caused by moisture in the coil, leading to poor insulation and magnetic leakage, resulting in excessive current and burnout. Therefore, prevent rainwater from entering the solenoid valve. Additionally, an overly stiff spring, excessive reaction force, or too few coil turns can also cause the coil to burn out due to insufficient suction. In an emergency, the manual button on the coil can be switched from the normal "0" position to the "1" position to open the valve.

3. Solenoid Valve Jammed: The clearance between the solenoid valve's spool sleeve and valve core is very small (less than 0.008mm), and it is usually assembled as a single piece. When mechanical impurities are introduced or there is insufficient lubrication, it can easily become jammed. A temporary fix is ​​to insert a steel wire through the small hole at the head to make it spring back. The fundamental solution is to disassemble the solenoid valve, remove the valve core and valve core sleeve, and clean them with CCI4 to ensure the valve core moves freely within the valve sleeve. During disassembly, pay attention to the assembly sequence of each component and the location of external wiring to ensure correct reassembly and wiring. Also check if the lubricator spray hole is blocked and if there is sufficient lubrication.

4. Air Leakage: Air leakage will cause insufficient air pressure, making it difficult for the forced valve to open and close. This is caused by damaged gaskets or worn spool sleeves, resulting in air leakage between several cavities. When troubleshooting solenoid valve malfunctions in switching systems, choose an appropriate time to address the issue when the solenoid valve is de-energized. If the problem cannot be resolved within one switching interval, pause the switching system and address the issue at a later time. 1. ATOS Solenoid Valve: Used for on/off control of liquid and gas pipelines, it is a two-position DO (discharge) control. Generally used for small pipelines.

2. ATOS Solenoid Valve: Can only be used as an on/off switch, it is a DO control and can only be used for small pipelines, commonly found in pipelines DN50 and below, rarely larger.

Differences between Italian ATOS electric valves and solenoid valves:

ATOS solenoid valves use a single solenoid coil to generate magnetic attraction that overcomes spring pressure, actuating the valve core. It has a simple structure, is inexpensive, and can only perform on/off functions.

ATOS solenoid valves have a sealed chamber with through-holes at different positions, each connecting to a different oil pipe. Inside the chamber is a piston, and on either side are two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side. Controlling the movement of the valve body opens or closes different drain holes. The inlet hole is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the current to the electromagnets controls the mechanical movement. ATOS solenoid valves are electromagnetically controlled industrial devices, fundamental components of automation systems used to control fluids. They are actuators, not limited to hydraulic or pneumatic systems. Used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each playing a different role in the control system. The most common types are check valves, safety valves, directional control valves, and speed control valves.

ATOS Solenoid Valve DKI-1613-X 24DC 24

ATOS Solenoid Valve DKI-1618-X 24DC 24

ATOS Solenoid Valve DKI-1630/2/A-X 24DC 24

ATOS Solenoid Valve DKI-1630/2-X 24DC

ATOS Solenoid Valve DKI-1631/2/A-X 24DC 24

ATOS Solenoid Valve DKI-1631/2/WP 24DC

ATOS Solenoid Valve DKI-1631/2/WP-X 230/50/60AC 24

ATOS Solenoid Valve DKI-1631/2-X 230/50/60AC 24

ATOS Solenoid Valve DKI-1631/2-X 24DC

ATOS Solenoid Valve DKI-1632/2/AFI/NC-X 24DC 24

ATOS Solenoid Valve DKI-1632/2/A-X 24DC 24

ATOS Solenoid Valve DKI-1671-X 24DC 24

ATOS Solenoid Valve DKI-1710-X 24DC

ATOS Solenoid Valve DKI-1711/WP-X 24DC 24

ATOS Solenoid Valve DKI-17116-X 24DC

ATOS Solenoid Valve DKI-17119-X 110/50/60AC 24

ATOS Solenoid Valve DKI-17119-X 230/50/60AC

ATOS Solenoid Valve DKI-1711-X 110/50/60AC 24

ATOS Solenoid Valve DKI-1711-X 230/50/60AC

ATOS Solenoid Valve DKI-1711-X 24DC

ATOS Solenoid Valve DKI-1713/1-X 24DC 24

ATOS Solenoid Valve DKI-1713/WP-X 230AC

ATOS Solenoid Valve DKI-1713-X 230/50/60AC

ATOS Solenoid Valve DKI-1713-X 24DC

ATOS Solenoid Valve DKI-1714-X 110/50/60AC 24

ATOS Solenoid Valve DKI-1714-X 24DC

ATOS Solenoid Valve DKI-1715-X 230/50/60AC 24

ATOS Solenoid Valve DKI-1717-X 24DC 24

ATOS Solenoid Valve DKI-1718-X 24DC 24

ATOS Solenoid Valve DKI-1750/2-X 24DC

ATOS Solenoid Valve DKI-1751/2/FI/NC-X 24DC 24

ATOS Solenoid Valve DKI-1751/2/FI/NO-X 24DC 24

Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi