Dynisco pressure sensor 3242SA00B21CEDDBACZZ

Brand

Dynisco (USA)

Applications

Chemical, Petroleum, Energy, Electrical, General

Dynisco pressure sensors have twice the measurement range of inductive sensors. They can detect not only metallic targets but also dielectric materials such as paper, glass, wood, and plastics, and can even detect through walls or cardboard. Since the human body is a conductor at low frequencies, they are also used for measuring human tremors and in burglar alarms.

When measuring strain in a component, Dynisco pressure sensors can directly attach strain gauges to the component. However, to measure signals such as force, pressure, and acceleration, these physical quantities must first be converted into strain before measurement with a strain gauge. This involves an additional conversion process compared to direct measurement. The element that performs this conversion is usually called an elastic element. Therefore, strain gauge sensors typically consist of two parts: an elastic sensitive element and a strain gauge.

Basic Points of Dynisco Pressure Sensors

I. Correct Installation Method

Damage to high-temperature melt pressure sensors is usually caused by improper installation. Forcing the sensor into a hole that is too small or irregularly shaped can damage the sensor's diaphragm due to impact. Using appropriate tools to machine the mounting hole helps control its size. Furthermore, proper installation torque helps create a good seal; however, excessive torque can cause the high-temperature melt pressure sensor to slip. To prevent this, an anti-slip compound is usually applied to the threaded portion of the sensor before installation.

(1) Verify the frequency response value of the pressure sensor under normal atmospheric pressure and standard temperature conditions using appropriate instruments.

(2) Verify the correctness of the pressure sensor's encoding and corresponding frequency response signal.

Dynisco pressure sensors are among the most commonly used sensors in industrial practice. They are widely applied in various industrial automation environments, including water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military, petrochemicals, oil wells, power, shipbuilding, machine tools, pipelines, and many other industries. Below is a brief introduction to the principles and applications of some commonly used sensors. Also available are medical pressure sensors.

Dynisco China will be responsible for the research, development, manufacturing, and global sales of HAOYING brand products, as well as the sales and technical service of Dynisco brand products in China.

Melt Pressure Sensor (Folded Edit Section)

PT4624, PT4625, PT4626 (Folded)

Melt Pressure Transmitter with Flexible Tube

Features: ★ Output: 4-20mA/0-5V/0-10V ★ Range: From 0-500psi to 0-30,000psi ★ Strong anti-interference capability

★ Direct input to upper control system ★ Flexible tube keeps strain gauges and transmitter components away from high-temperature areas ★ Good stability and repeatability ★ Accuracy: ±0.5% ★ Internal 80% calibration ★ CE certified

Accuracy: ±0.5% of full scale

Repeatability: ±0.2% of full scale

Maximum Overpressure: Less than twice the full scale or 35,000psi

Contact Medium Material: 15-5PH Stainless Steel

Armoloy Coating

Internal Switching Calibration (R-Cal): 80% ±1% of full scale

Insulation Resistance: 1,000 MΩ (50VDC) Maximum diaphragm temperature: 750°F (400°C)

Melt temperature affects zero drift: <25psi/100°F

(45psi/100°C)

Installation torque: 500 inch-lbs

PT4624, PT4625, PT4626 net weight: 2 lbs

Strain gauge housing ambient temperature: -20±160°F (-29±71°C)

Temperature compensation range: +30±160°F (-1±71°C)

Ambient temperature affects zero drift: <±0.05% of full scale/°F

(±0.10% of full scale/°C)

Sensitivity: <±0.02% of full scale/°F

(±0.04% of full scale/°C)

TPT4634, TPT4635, TPT4636 Folded

Melt pressure transmitter with flexible tube for point temperature measurement

Features: ★ Equipped with a J-type thermocouple, allowing simultaneous temperature measurement. ★ Measuring range: From 0-500psi to 0-30,000psi. ★ Strong anti-interference capability. ★ Thermocouple can be disassembled and replaced in the field. ★ Features a flexible tube, allowing strain gauges and transmitters to be positioned away from high-temperature areas. ★ Good stability and repeatability.

★ Output: 4-20mA/0-5V/0-10V, away from high-temperature areas. ★ CE certified. ★ Direct input to upper-level control systems. ★ 80% internal calibration. ★ RTDs and other types of thermocouples are optional. ★ Accuracy: ±0.5%

Pressure Sensor 3242SA00B21CEDDBACZZ

Pressure Sensor 3242SA00B21FEDDBACZZ

Pressure Sensor 4222SA00B20BGDDBAAZZB496

DyniscoPT4624-35MPA-12/30

DyniscoPT4626-35MPA 15/18 0-35MPa

Dynisco DYNA4-1/2-3.5L-15/46 S190

Dynisco Pressure Sensor PT460E-50MPA-6

Dynisco PT4626-35MPA-15/18

Dynisco Pressure Sensor MDA460-1/2-7C-15

Dynisco Pressure Sensor MDA460-M18-7C-15

Dynisco MDA460-1/2-2C-23 0-200BAR

Dynisco MDA460-1/2-2C-23 0-200BAR 03-01-11427287

Dynisco UPR700

Dynisco MDT422F1/2-3.5C-15/46-SIL2

Dynisco TPT463E-50MPA-18/24-RTD1

Dynisco DYMT-F-1/2-Pt100/3-0-15-G-H

Dynisco PT462E-35MPA-6/18

Dynisco Pressure Transmitter TPT4634-35MPA-6/18-RTD1-SIL2

Dynisco DYNA-4-70-50-700-BAR 10VDC

Dynisco 2x MDA420-1/2-70-15

Dynisco Modell:PT460E-50MPA-6 Art.Nr:0460001410

Dynisco Pressure Sensor PT462EH-20MPA-6/18

Dynisco Pressure Transmitter 2242SA05M13CEDDCACZZ DyniscoNP465XL-1/2-20MPA

Dynisco1480-4-0-0-0

Dynisco0-3.000Psig 24VDC 4-20mA S242-3M-6/30

DyniscoDVNISCO PT4624-35MPA-9/18

DyniscoTDT432F-1/2-2C-46/46-S147-A 0-200bar

DyniscoMDT422F-1/2-3.5C

DyniscoTDT432F-1/2-5C-46-S137-A

DyniscoTYPE: PG442R-35MPa/3.5CB-12/24

DyniscoTPT4634-5M-6/18-SIL2 DyniscoTDT432F-1/2-2C-46/46-S147-SIL2 Nr.: 432F0083S

DyniscoTDT432F-1/2-5C-46/46-S147-SIL2 Nr.: 432F0064S

DyniscoMDT422F-1/2-2C-32/46-SIL2 Nr.: 422F0125S

DyniscoMDT422F-1/2-3.5C-15/46-SIL2 Nr.: 422F0110S

DyniscoPT462E-35MPA-6/18,0-350bar,10VDC

DyniscoECHO-MV3-MPA-R21-UNF-6PN-S12-F18-TCJ Accuracy: ±0.5% of full scale

Repeatability: ±0.2% of full scale

Maximum Overpressure: Less than twice full scale or 35,000 psi

Contact Material: 15-5PH Stainless Steel

Armoloy Coating

Internal Switching Calibration (R-Cal): 80% ± 1% of full scale

Insulation Resistance: 1,000 MΩ (50VDC)

Maximum Diaphragm Temperature: 750°F (400°C)

Melt Temperature Effect on Zero Drift: <25 psi/100°F

(45 psi/100°C)

Installation Torque: 500 inch-lbs

TPT4634, TPT4635, TPT4636 Net Weight: 3.5 lbs

Strain Gauge Housing Ambient Temperature: -20 ± 160°F (-29 ± 71°C)

Temperature Compensation Range: +30 ± 160°F (-1 ± 71°C) Ambient temperature affects zero drift: <± 0.05% full scale/'F

(± 0.10% full scale/℃)

Sensitivity: <±0.02% full scale/'F

(±0.04% full scale/℃)

Our company mainly deals in European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, Vickers, Helón (Norgren)

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi