Selection Guide for Dynisco Pressure Sensors (USA)

Brand

Dynisco/American Dennisco

Application Areas

Environmental Protection, Food/Agricultural Products, Chemical Industry, Petroleum, General Industry

Dynisco Sensors, Dynisco Melt Pressure Sensors, Dynisco Online Rheometers, Dynisco Capillary Rheometers

Founded in 1953, Dynisco was the first company to apply strain gauge technology to pressure sensors applicable to various markets and industries, and the first to design and apply sensors for measuring melt pressure in extrusion processes.

Selection Guide for Dynisco Pressure Sensors The basic parameters of Dynisco pressure sensors are as follows:

Accuracy: ±0.5% of full scale

Repeatability: ±0.2% of full scale

Contact Material: 15-5PH Stainless Steel

Armoloy Coating

Internal Switching Calibration (R-Cal): 80% ± 1% of full scale

Insulation Resistance: 1,000 MΩ (50VDC)

Maximum Diaphragm Temperature: 750°F (400°C)

Melt Temperature Influence on Zero Drift: <25psi/100°F

(45psi/100°C)

Installation Torque: 500 inch-lbs

Net Weight of TPT4634, TPT4635, TPT4636: 3.5 lbs

Ambient Temperature of Strain Gauge Housing: -20±160°F (-29±71°C)

Temperature Compensation Range: +30±160°F (-1±71°C) Ambient temperature affects zero drift: <± 0.05% full scale/'F

(± 0.10% full scale/℃)

Sensitivity: <±0.02% full scale/'F

(±0.04% full scale/℃)

PT460E, PT462E, TPT463E (folded)

PT460E

Standard type rigid rod melt pressure sensor

Features:

★Accuracy: >±0.5% ★Output: 3.33mV/V full scale

★80% internal calibration

★Size: From 0-500psi to 0-30,000psi

★Good stability and repeatability

★CE certified

PT462E

Standard type melt pressure sensor with flexible tube

Features: Contact 1580 08017-37

★Features a flexible tube, allowing the strain gauge housing to be kept away from high-temperature areas

★ Accuracy: Better than ±0.5%

★ Output: 3.33mV/V full scale

★ Internal 80% calibration

★ Measurement range: From 0-500psi to 0-30,000psi

★ Good stability and repeatability

★ CE certified

TPT463E

Standard Type Melt Pressure Sensor with Flexible Tube for Simultaneous Temperature Measurement

Features:

★ Equipped with a J-type thermocouple for simultaneous temperature measurement

80% internal calibration

★ Thermocouple can be removed and replaced in the field

Measurement range: From 0-500psi to 0-30,000psi

★ Features a flexible tube to keep the strain gauge housing away from high-temperature areas

Good stability and repeatability

★ Accuracy: Better than ±0.5%

CE certified Output: 3.33mV/V full scale RTD and other types of thermocouples are available as options

Measurement range (psi) 0-500; 0-750; 0-1,000; 0-1,500; 0-3,000;

0-5,000; 0-7,500; 0-10,000; 0-15,000;

0-20,000; 0-30,000

Accuracy: ±0.5% of full scale

Measurement Principle: Wheatstone bridge

Bridge Resistance: Input >345Ω; Output 350Ω±10%

Full-scale Output: 3.33mV/V±2%

Zero-point Balance: ±10% of full scale

Maximum Diaphragm Temperature: 750°F (400°C)

Melt Temperature Influence on Zero-point Drift: <25psi/100°F (45psi/100°C)

Maximum Operating Temperature of Strain Gauge Housing: 250°F (121°C) Ambient temperature affects zero drift: <±0.05% of full scale/'F

(±0.10% of full scale/℃)

Sensitivity: <±0.02% of full scale/'F

(±0.04% of full scale/℃)

Repeatability: ±0.2% of full scale

Maximum overpressure: Less than twice the full scale or 35,000 psi

Contact medium material: 15-5PH stainless steel

Armoloy coating

Power supply voltage: Recommended 10VDC, maximum 12VDC

Internal switching calibration (R-Cal): 80% ±1% of full scale

Insulation resistance: 1,000 megohms (50Vdc)

Mounting torque: 500 inch-lbs

PT460E net weight: 1 lbs

PT462E net weight: 1.5 lbs

PT463E net weight: 2.5 lbs Furthermore, over the past few decades, Dynisco has expanded through acquisitions and growth, now offering a wide range of products including various melt testing instruments, gear pumps, screen changers, pelletizers, and other auxiliary equipment for polymerization and plastics extrusion processes.

Today, Dynisco is a leading global manufacturer of pressure and temperature measurement and control products for the plastics industry. We have solved many challenging problems in measurement fields such as extrusion, molding, process control, and industrial applications. Our sensors meet numerous standards such as CE, FM, SIRA, and CSA. We provide high-precision pressure measurement devices for high-temperature applications; our sensors are heat-resistant, wear-resistant, and corrosion-resistant.

Dynisco's main products include:

Dynisco Melt Pressure Sensors

Dynisco Online Rheometers

Dynisco Capillary Rheometers

Dynisco Melt Analyzers

Dynisco Humidity Analyzers

Dynisco HDT/VICAT Heat Deflection and Vicat Softening Point Temperature Meters

The company primarily deals with European and American brands and can source brands from any European country. For example, key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi