CAMOZZI cylinder 16N2A12A175 in stock

Brand

CAMOZZI/Italian CAMOZZI

Action Method

Other

Application Areas

Chemical, Petroleum, Energy, Electrical, General

Camozzi Solenoid Valves, Camozzi Proximity Switches, Camozzi Connectors, Camozzi Valve Islands

CAMOZZI Cylinders

CAMOZZI Cylinders

Common Faults

Problems

CAMOZZI Cylinders

are cast. After leaving the factory, cylinders undergo aging treatment to eliminate the internal stress generated during the casting process. If the aging time is short, the finished cylinder will deform during subsequent operation.

CAMOZZI Cylinders

are subjected to complex forces during operation. Besides static loads such as the pressure difference between the inside and outside of the cylinder and the weight of the components inside, they also bear the reaction force of steam flowing out of the stationary vanes on the stationary parts, as well as the forces exerted on the cylinder by various connecting pipes under hot and cold conditions. Under the interaction of these forces, the cylinder is prone to plastic deformation, causing leakage.

The rapid increase or decrease of load in CAMOZZI cylinders, especially during rapid starts, stops, and changes in operating conditions, can cause significant temperature fluctuations. Incorrect cylinder warm-up methods and premature removal of insulation during shutdown maintenance can also lead to substantial thermal stress and deformation in the cylinder and flanges.

Stress generated during machining or after welding repairs, without subsequent tempering to eliminate it, results in significant residual stress in the cylinder, causing deformation during operation.

During installation or maintenance, improper maintenance processes and techniques can lead to unsuitable expansion clearances in the inner cylinder, cylinder diaphragms, diaphragm sleeves, and steam seal sleeves, or inappropriate expansion clearances in the lug pressure plates. This generates enormous expansion forces after operation, causing cylinder deformation.

Poor quality, excessive impurities, or incorrect type of cylinder sealant can also cause problems. Hard impurities in the sealant can prevent a tight seal.

Failure to properly seal the cylinder can also contribute to deformation. CAMOZZI Cylinders

Insufficient bolt tightening or substandard bolt material. The tightness of the cylinder mating surface depends primarily on the bolt tightening force. Thermal stress and high temperatures generated during unit start-up, shutdown, or load adjustments can cause bolt stress relaxation. If the stress is insufficient, the bolt preload will gradually decrease. If the cylinder bolts are of poor quality, they will elongate under thermal stress and cylinder expansion forces during prolonged operation, resulting in plastic deformation or fracture, leading to insufficient tightening and cylinder leakage.

CAMOZZI Cylinders

Incorrect bolt tightening sequence. Generally, cylinder bolts are tightened simultaneously from the center outwards, starting from the point of maximum sag or deformation. This shifts the gap from the point of greatest deformation towards the free ends of the cylinder, gradually eliminating the gap. If tightened from the sides towards the center, the gap concentrates in the middle, forming an arc-shaped gap at the cylinder mating surface, causing steam leakage.

CAMOZZI Cylinder Series Introduction

The 16, 24, and 25 series miniature cylinders feature mechanically rolled end caps on the cylinder barrel and end caps. The pistons of the 24 and 25 series cylinders are equipped with permanent magnets, allowing operation with magnetic switches. (Example: 24N2A16A100)

The 27 series double-acting magnetically driven cylinders are non-pull-rod type, with mechanically rolled end caps on the cylinder barrel and end caps. (Example: 27M2A20A0050)

The 31 series cylinders are compact magnetically driven cylinders with aluminum cylinder barrels. (Example: 31M2A032A050)

The 40 series cylinders are double-acting magnetically driven cylinders. The 32~125mm sizes are discontinued. The upgraded 60 series is an alternative. (Example: 40M2L160A0200)

The 45 series guide devices, when used with corresponding cylinders, can prevent the rotation of the cylinder piston rod. (Example: 45NUT050A0100)

The 60 series cylinders are upgraded replacements for the 40 series cylinders. These cylinders have a permanent magnet mounted on the piston, and the piston's position signal can be obtained via a magnetic proximity switch mounted on the cylinder. (Example: 60M2L050A0200)

The 61 series cylinders are upgraded replacements for the 41 series cylinders. The cylinder rod is not exposed. (Example: 61M2P050A0200)

The 90 series stainless steel cylinders are suitable for harsh environmental conditions. (Example: 90M2A050A0200)

The 92 series stainless steel cylinders are suitable for environments requiring strict cleaning and other harsh conditions for hygiene reasons. (Example: 92M2A050A0200)

The 94 and 95 series stainless steel miniature cylinders are non-rod type. Suitable for use in harsh environments. (Example: 94N2A16A100)

The QCTF and QCBF series double-guide rod cylinder slides are single-cylinder pneumatic slides with double guide devices. (Example: QCTF2A020A050)

The QP and QPR series cylinders are short-stroke cylinders (thin cylinders). (Example: QP2A050A050)

Camozzi (Italy)

Camozzi Group was founded in 1964 and has branches in 75 countries worldwide. In the field of pneumatic automation, Camozzi is the largest pneumatic component company in Italy and one of the world's top 10 pneumatic component manufacturers. It was one of the first companies to pass DNV ISO9000 certification and has also passed DNV ISO14000 certification. Camozzi pneumatic components have 23 branches, 53 agents, and 8 global factories. Camozzi products from Italy are widely used in light industry, textiles, printing and dyeing, food, packaging, printing, rubber and plastics, chemicals, electronics, automotive, and machinery equipment industries.

Product Introduction

Camozzi primarily manufactures Italian Camozzi pneumatic actuators, Italian Camozzi pneumatic control components, Italian Camozzi air source treatment devices, Italian Camozzi pneumatic auxiliary components, and Italian Camozzi vacuum components.

Camozzi Automation Division provides pneumatic component solutions for numerous industries. The complete product range includes cylinders, valves, FRLS, accessories, vacuum components, control cabinets, and systems. Major production equipment manufacturing plants are located in Russia, China, Ukraine, the USA, and India, with the headquarters in Italy.

Every Camozzi device utilizes advanced technology, based on lean manufacturing principles and a structured and highly efficient organization. Their global network of branches and distributors worldwide provides confidence to a wide range of customers, from major users to larger OEMs.

Fold Edit This Section: Commussen History

In 1964, three brothers, Attilio, Luigi, and Geromino, began manufacturing industrial automation components in Lumezzañe, a small village in the Lombardy region of northern Italy.

Today, the Commussen family continues its history with respect for tradition. Their values ​​and principles are the most important legacy guiding their descendants.

Over 40 years of commitment, dedication, and passion have built a solid foundation for future development and innovation. The Commussen story has never lacked passion.

Cylinder Models:

16N1A08A010 MINI-ZYLINDER, EW

16N1A08A025 MINI-ZYLINDER, EW

16N1A08A040 MINI-ZYLINDER, E

16N1A08A050 MINI-ZYLINDER, E

16N1A10A010 MINI-ZYLINDER, E

16N1A10A025 MINI-ZYLINDER, EW

16N1A10A040 MINI-ZYLINDER, E

16N1A10A050 MINI-ZYLINDER, E

16N1A12A010 MINI-ZYLINDER, EW

16N1A12A015 MINI-ZYLINDER, E 16N1A12A020 MINI-ZYLINDER,EW,D

16N1A12A025 MINI-ZYLINDER, EW

16N1A12A025DE01 MINI-ZYL.EW,

16N1A12A030 MINI-ZYLINDER EW/D

16N1A12A040 MINI-ZYLINDER, EW

16N1A12A050 MINI-ZYLINDER, E

16N1A16A015 MINI-ZYLINDER D.16

16N2A08A010 MINI-ZYLINDER, DW

16N2A08A015 MINI-ZYLINDER, D

16N2A08A020 MINI-ZYLINDER, D 16N2A08A025 MINI-ZYLINDER, DW

16N2A08A040 MINI-ZYLINDER, DW

16N2A08A050 MINI-ZYLINDER, DW

16N2A08A080 MINI-ZYLINDER, D

16N2A08A100 MINI-ZYLINDER, DW

16N2A08A125 MINI-ZYLINDER, D

16N2A08A160 MINI-ZYLINDER, D

16N2A08A200 MINI-ZYLINDER, D

16N2A10A005 MINI-ZYL. DW, DIN

16N2A10A010 MINI-ZYLINDER, DW 16N2A10A015 MINI-ZYLINDER, DW

16N2A10A020 MINI-ZYLINDER, DW

16N2A10A025 MINI-ZYLINDER, DW

16N2A10A030 MINI-ZYLINDER,DW,D

16N2A10A040 MINI-ZYLINDER, DW

16N2A10A050 MINI-ZYLINDER, DW

16N2A10A060 MINI-ZYLINDER, DW

16N2A10A080 MINI-ZYLINDER, DW

16N2A10A100 MINI-ZYLINDER, DW

16N2A10A125 MINI-ZYLINDER,DW 16N2A10A160 MINI-ZYLINDER, D

16N2A10A200 MINI-ZYLINDER, D

16N2A12A010 MINI-ZYLINDER, DW

16N2A12A015 MINI-ZYLINDER, DW

16N2A12A020 MINI-ZYLINDER, DW

16N2A12A025 MINI-ZYLINDER, DW

16N2A12A030 MINI-ZYLINDER, DW

16N2A12A040 MINI-ZYLINDER, DW

16N2A12A050 MINI-ZYLINDER, DW

16N2A12A060 MINI-ZYLINDER, DW 16N2A12A065 MINI-ZYLINDER, D

16N2A12A070 MINI-ZYLINDER,DW,D

16N2A12A080 MINI-ZYLINDER, DW

16N2A12A100 MINI-ZYLINDER, DW

16N2A12A125 MINI-ZYLINDER, DW

16N2A12A160 MINI-ZYLINDER, DW

16N2A12A175 MINI-ZYLINDER, D

16N2A12A200 MINI-ZYLINDER, DW

16N2A12A500 MINI-ZYLINDER, D

16N2A16A040 MINI-ZYLINDER D.16 16N2A16A065 MINI-ZYLINDER D.16

16N3A08A010 MINI-ZYLINDER, D

16N3A08A025 MINI-ZYLINDER, D

16N3A08A040 MINI-ZYLINDER, D

16N3A08A050 MINI-ZYLINDER, D

16N3A08A080 MINI-ZYLINDER 8/ The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, Vickers, Helón (Norgren)

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi