ATOS solenoid valve DPZO-AE-271-S5/D in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Fields

Chemical, Petroleum, Energy, Electrical, Comprehensive

ATOS Relief Valve, ATOS Proportional Valve, ATOS Stack Valve, ATOS Solenoid Valve, ATOS Amplifier

Thank you for your interest in our products. If you would like to learn more, such as the price and specifications of Italian ATOS products, please feel free to contact us. We sincerely invite you to experience our satisfactory service!

An ATOS solenoid valve consists of an electromagnetic coil and a magnetic core, and is a valve body containing one or more orifices. When the coil is energized or de-energized, the operation of the magnetic core will cause the flow to pass through the valve body or be cut off, thereby changing the direction of the fluid.

The electromagnetic components of the solenoid valve consist of a stationary iron core, a moving iron core, and a coil; the valve body consists of a spool, a spool sleeve, and a spring base. The electromagnetic coil is directly mounted on the valve body, which is enclosed in a sealing tube, forming a simple and compact assembly. The solenoid valves we commonly use in production include 2-position 2-way and 2-position 3-way valves.

Common ATOS solenoid valve malfunctions include the solenoid valve not operating. Troubleshooting should be done from the following aspects:

(1) Loose or detached solenoid N-connector. The solenoid valve will not receive power. Tighten the wire.

(2) Burned-out solenoid coil. Disconnect the solenoid valve wiring and measure with a multimeter. If an open circuit is detected, the solenoid valve coil is burnt out. This can be caused by the coil being subjected to NJ (non-electric shock), resulting in poor insulation and magnetic leakage, causing excessive current and burnout. Therefore, prevent rainwater from entering the solenoid valve. Additionally, an overly stiff spring, excessive reaction force, or too few coil turns can also cause the coil to burn out due to insufficient suction.

(3) Solenoid valve jamming. The clearance between the valve sleeve and valve core of the solenoid valve is very small. When mechanical impurities are introduced or the valve body is rusted, it can easily jam. The fundamental solution is to disassemble the solenoid, remove the N-core and valve core sleeve, and clean them with CCI4 to ensure the valve core moves freely within the sleeve. During disassembly, pay attention to the assembly sequence of each component and the location of external wiring to ensure correct reassembly and wiring. “) If it is a pilot-operated solenoid valve, check if the differential pressure in the pipeline is too small. If the differential pressure is too small, the solenoid valve will not work properly. In this case, a direct-acting solenoid valve should be selected. If the differential pressure is too large, far exceeding the design value of the solenoid N, it will also not work properly. In this case, a high-performance solenoid valve should be used. (5) If dirt in the pipeline blocks the small hole of the pilot valve, the pilot valve will not be able to open properly, and the main valve will not be able to open in time. The valve body can be disassembled, the dirt cleaned, and reassembled to work properly. (6) In addition, solenoid valves are generally installed horizontally. If they are installed on the side, it may cause the valve to not close tightly, i.e., internal leakage. Side installation should be avoided as much as possible. ATOS Solenoid Valve Stock List DHI-0610/A-X 230/50/60AC DHI-0610/A-X 24DC 23 DHI-0610-X 110/50/60AC DHI-0610-X 230/50/60AC 23

DHI-0610-X 24DC

DHI-0611/A-X 24DC 23

DHI-0611/FC-X 24DC 23

DHI-06119/A-X 24DC 23

DHI-0611-X 24DC 23

DHI-0612/A-X 24DC

DHI-0613/A-X 24DC 23

DHI-0613/WP-X 230AC

DHI-0613-X 230/50/60AC

DHI-0613-X 24DC

DHI-0614-X 24DC

DHI-0616/A-X 230/50/60AC DHI-0618/A-X 24DC 23

DHI-0630/2/A-X 230/50/60AC 23

DHI-0630/2/A-X 24DC 23

DHI-0630/2-X 24DC

DHI-0631/1/2/A-X 24DC

DHI-0631/2/A-IX 24DC

DHI-0631/2/A-X 110/50/60AC 23

DHI-0631/2/A-X 230/50/60AC 23

DHI-0631/2/P-X 24DC

DHI-0713-X 110/50/60AC

DHI-0713-X 230/50/60AC The company primarily deals in European and American brands, and can source brands from any European country. For example, its key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, HIRSCHMANN industrial switches, Henschler, MURR, SCHMERSAL, SAMSON, and EPRO (a subsidiary of Emerson).

American brands include MOOG, ASCO solenoid valves, MAC solenoid valves, NUMATICS, PARKER pneumatics and hydraulics, VICKERS, and ROSS.

British brands include Norgren. Italian brands OMAL, ATOS, CAMOZZI, UNIVER, and Camozzi.