ATOS solenoid valve DHU-07149-X24DC20 in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Chemical, Petroleum, Mining, Road/Rail/Marine, General

ATOS solenoid valves are electromagnetically controlled industrial devices, fundamental components of automation used to control fluids. They are actuators, not limited to hydraulic or pneumatic systems. Used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each playing a different role in the control system. Commonly used types include check valves, safety valves, directional control valves, and speed control valves.

ATOS solenoid valves contain a sealed chamber with through-holes at different locations, each connecting to a different oil pipe. Inside the chamber is a piston, flanked by two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side. Controlling the movement of the valve body opens or closes different drain holes. The inlet hole is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the flow of current to the electromagnets controls the mechanical movement.

ATOS solenoid valves are mainly classified as follows:

Solenoid valves are fundamentally divided into three categories:

1) Direct-acting solenoid valves:

Principle: When energized, the electromagnetic coil generates electromagnetic force that lifts the closing element from the valve seat, opening the valve. When de-energized, the electromagnetic force disappears, and the spring presses the closing element back onto the valve seat, closing the valve.

Features: Can operate normally under vacuum, negative pressure, and zero pressure, but the nominal diameter is generally no more than 25mm.

2) Step-by-Step Direct-Action Solenoid Valve:

Principle: It combines direct-acting and pilot-operated principles. When there is no pressure difference between the inlet and outlet, upon energization, the electromagnetic force directly lifts the pilot valve and the main valve's closing element sequentially, opening the valve. When the inlet and outlet reach the starting pressure difference, upon energization, the electromagnetic force actuates the pilot valve, increasing the pressure in the lower chamber of the main valve and decreasing the pressure in the upper chamber, thus using the pressure difference to push the main valve open. When de-energized, the pilot valve uses spring force or medium pressure to push the closing element downwards, closing the valve.

Features: Reliable operation even at zero pressure difference, vacuum, or high pressure, but requires higher power and must be installed horizontally.

3) Pilot-operated solenoid valve:

Principle: When energized, the electromagnetic force opens the pilot orifice, causing a rapid drop in pressure in the upper chamber. This creates a pressure differential around the closing element, with lower pressure at the top and higher pressure at the bottom. The fluid pressure pushes the closing element upwards, opening the valve. When de-energized, the spring force closes the pilot orifice. The inlet pressure quickly passes through the bypass orifice, creating a pressure differential around the closing element, with lower pressure at the bottom and higher pressure at the top. The fluid pressure pushes the closing element downwards, closing the valve.

Features: Higher upper limit of fluid pressure range; can be installed arbitrarily (customization required), but must meet fluid pressure differential conditions.

2. Solenoid valves are classified into six subcategories based on differences in valve structure, materials, and operating principles: direct-acting diaphragm structure, step-by-step direct-acting diaphragm structure, pilot-operated diaphragm structure, direct-acting piston structure, step-by-step direct-acting piston structure, and pilot-operated piston structure.

3. Solenoid valves are classified according to function: water solenoid valves, steam solenoid valves, refrigeration solenoid valves, cryogenic solenoid valves, gas solenoid valves, fire-fighting solenoid valves, ammonia solenoid valves, gas solenoid valves, liquid solenoid valves, miniature solenoid valves, pulse solenoid valves, hydraulic solenoid valves, normally open solenoid valves, oil solenoid valves, DC solenoid valves, high-pressure solenoid valves, explosion-proof solenoid valves, etc.

DHRZO-P5-012/25 20

DHU-0610/A-X 24DC 20

DHU-0610/FI/NC-X 24DC 20

DHU-0610-X 24DC 20

DHU-0610-X 48DC 20

DHU-0611-X 24DC

DHU-0614/A-X 24DC 20

DHU-0614-X 24DC 20

DHU-06191-X 24DC 20

DHU-06194-X 24DC 20

DHU-0630/2/A-X 24DC

DHU-0630/2-X 24DC

DHU-0631/2/A-X 24DC

DHU-0631/2/FC-X 24DC 20

DHU-0631/2-X 24DC

DHU-0632/2/A-X 24DC 20

DHU-0632/2-X 24DC 20

DHU-0639/C-X 24DC 20

DHU-0671-X 24DC

DHU-0710/L1-X 24DC 20

DHU-0710-X 24DC

DHU-0711/WP-X 24DC 20

DHU-07119-X 24DC 20

DHU-0711-X 24DC

DHU-0713/1-X 24DC

DHU-0713/WP-X 24DC 20

DHU-0713P-X 24DC 20

DHU-0713-X 24DC

DHU-07149-X 24DC 20

DHU-0714-X 24DC

DHU-0718-X 24DC

DHU-0750/2/FI/NC-X 24DC 20

DHU-0750/2-X 24DC

DHU-0751/2-00 20 /WG

Our company mainly deals in European and American brands and can purchase brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi