ATOS solenoid valve DHI-0751/2/WP-X230 in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Chemical, Petroleum, Mining, Road/Rail/Marine, Comprehensive

ATOS Piston Pumps, ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders, ATOS Relief Valves, ATOS Proportional Valves

Thank you for your interest in our products. If you would like to learn more, such as the price and specifications of Italian ATOS products, please feel free to contact us. We sincerely invite you to experience our satisfactory service!

ATOS solenoid valves are electromagnetically controlled industrial devices, fundamental components for fluid control in automation. They are actuators, not limited to hydraulic or pneumatic systems. They are used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, ensuring both accuracy and flexibility. There are many types of solenoid valves, each playing a different role in the control system. Commonly used types include check valves, safety valves, directional control valves, and speed control valves.

ATOS solenoid valves contain a sealed chamber with through-holes at different locations, each connecting to a different oil pipe. Inside the chamber is a piston, flanked by two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side. Controlling the movement of the valve body opens or closes different drain holes. The inlet hole is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the flow of current to the electromagnets controls the mechanical movement.

The selection of ATOS solenoid valves should first follow four principles in order of priority: safety, reliability, applicability, and economy. Secondly, it should be based on six aspects of the on-site operating conditions (i.e., pipeline parameters, fluid parameters, pressure parameters, electrical parameters, actuation method, and special requirements). Selection Criteria:

1. Selecting Solenoid Valves Based on Pipeline Parameters: Nominal Diameter (DN), Connection Type

1) Determine the nominal diameter (DN) based on the inner diameter of the pipeline or flow requirements.

2) Connection type: Generally, for DN > 50, a flange connection should be selected; for DN ≤ 50, the connection type can be freely selected according to user needs.

2. Selecting Solenoid Valves Based on Fluid Parameters: Material, Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel valves are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-Temperature Fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves should be chosen.

3) Fluid State: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN 25, it is essential to distinguish between these states.

4) Fluid Viscosity: Generally, any choice is acceptable below 50 cSt; if it exceeds this value, a high-viscosity solenoid valve should be selected. 3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structure

1) Nominal Pressure: This parameter has the same meaning as other general-purpose valves, determined by the nominal pressure of the pipeline.

2) Working Pressure: If the working pressure is low, a direct-acting or step-direct-acting principle must be selected. For a minimum working pressure difference of 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected.

4. Electrical Selection: AC220V and DC24V voltage specifications should be prioritized for convenience.

5. Selecting Based on Continuous Working Time: Normally Closed, Normally Open, or Continuously Energized

1) When the solenoid valve needs to be open for a long time, and the continuous time is longer than the closing time, a normally open type should be selected.

2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected.

3) However, for some safety protection applications, such as furnace and kiln flame monitoring, normally open valves cannot be selected; a continuously energized type should be chosen. 6. Select auxiliary functions according to environmental requirements: explosion-proof, backflow preventer, manual operation, waterproof mist, water spray, and diving protection.

DHI-0613-X 24DC

DHI-0614-X 24DC

DHI-0616/A-X 230/50/60AC

DHI-0618/A-X 24DC 23

DHI-0630/2/A-X 230/50/60AC 23

DHI-0630/2/A-X 24DC 23

DHI-0630/2-X 24DC

DHI-0631/1/2/A-X 24DC

DHI-0631/2/A-IX 24DC

DHI-0631/2/A-X 110/50/60AC 23

DHI-0631/2/A-X 230/50/60AC 23

DHI-0631/2/P-X 24DC

DHI-0631/2/WP-X 12DC 23

DHI-0631/2/WP-X 220DC 23

DHI-0631/2/WP-X 230/50/60AC

DHI-0631/2P/A-X 24DC

DHI-0631/2P-X 24DC

DHI-0631/2-X 230/50/60AC

DHI-0713-X 110/50/60AC

DHI-0713-X 230/50/60AC

DHI-0713-X 24DC

DHI-0713-X 24DC 23/PE

DHI-0714/WP-X 230/50/60AC

DHI-0714/WP-X 230/50/60AC 23/PE

DHI-0714-X 230/50/60AC

DHI-0714-X 24DC

DHI-0715/FI/NC-X 24DC

DHI-0715-X 24DC

DHI-0716-X 24DC

DHI-0717-X 24DC

DHI-0718-X 230/50/60AC

DHI-0718-X 24DC

DHI-0750/2-X 24DC

DHI-0751/2/FI/NC-X 24DC 23

DHI-0751/2/FI/NO-X 24DC 23

DHI-0751/2/WP-X 230/50/60AC DHI-0751/2/WP-X 230/50/60AC 23/PE

DHI-0751/2/WP-X 24DC

DHI-0751/2-X 110/50/60AC 23

DHI-0751/2-X 230/50/60AC

DHI-0751/2-X 24DC

DHO-0630/2/A-X 24DC 20

DHO-0631/2/A-X 24DC 20

DHO-0631/2/L1-X 24DC 20

DHO-0631/2-X 24DC

DHO-0639/O-X 24DC 20

DHO-0710-X 24DC 20

DHO-0711-X 24DC DHO-0713-X 24DC 20

DHO-07191-X 24DC

Our company mainly deals with European and American brands, and can source brands from any European country. For example, our key German brands include: FESTO, BURKERT, BOSCH-REXROTH, IFM, TURCK, P+F, BALLUFF, SICK, HIRSCHMAN, MURR, HYDAC, GSR, CROUZET, E+H, PILZ, HAWE, SIEMENS, STAUFF, EUCHNER, EMG, UNIVER, ATOS, NORGREN, etc. We have cooperative relationships with approximately 500 brands of varying sizes from other European countries.

We also have companies in the US, and cooperate with approximately 200 brands, including ASCO, Vickers, MAC, Parker, MOOG, Fairchild, Denison, Ross, UE, MTS, and GEFRAN.

We have distribution rights for Japanese brands, such as CKD, TOYOOKI, NACHI, DAIKIN, SMC, KOGANEI, TACO, NOK, and TOKIMEC.

Our business scope includes:

Hydraulic components:

Solenoid directional valves, directional valves, check valves, stack valves, relief valves, counterbalancing valves, proportional valves, manual directional valves, flow valves, pressure reducing valves,

Throttle valves, pressure control valves, back pressure valves, filling valves, flow dividers, shuttle valves, pressure relays, cartridge valves, pneumatic valves, piston pumps,

Gear pumps, vane pumps, cycloidal hydraulic motors, oil coolers, hydraulic cylinders, etc.;

Pneumatic components:

Air source processor assemblies, filters, pressure regulating valves, oil feeders, solenoid valves, pneumatic valves, angle seat valves, manual valves, hand-operated valves, foot valves,

Mechanical valves, check valves, vacuum generators, cylinders, magnetic switches, shock absorbers, pressure gauges, quick couplings, floating couplings,

Pressure gauge switches, water coolers, electric positioners, PU tubing, vacuum suction cups, oil filters, vibrators;

Electrical components:

Relays, sensors, converters, proximity switches, encoders, programmable logic controllers (PLCs); The company maintains a large inventory, with standard parts readily available. To better serve customers across various industries, the company also distributes other spare parts, utilizing professional sourcing channels and offering reasonable prices.

The company's products are widely used in industrial machinery, machine tools, plastics machinery, shoe machinery, brick machinery, metallurgy, mining, chemical industry, papermaking, coal industry, shipbuilding, power generation, construction machinery, environmental protection machinery, and many other fields.