ATOS solenoid valve DHI-0713-X 110/50/60AC in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Environmental Protection, Bio-industry, Petroleum, Pharmaceutical/Biopharmaceutical, Comprehensive

ATOS Solenoid Valve Maintenance Methods

ATOS Piston Pump, ATOS Gear Pump, ATOS Axial Piston Pump, ATOS Vane Pump,

ATOS solenoid valves are electromagnetically controlled industrial devices, used as basic automated components for controlling fluids. They are actuators, not limited to hydraulic or pneumatic systems. They are used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, while ensuring both accuracy and flexibility. There are many types of solenoid valves, each playing a different role in the control system. Commonly used types include check valves, safety valves, directional control valves, and speed regulating valves.

Common ATOS solenoid valve malfunctions include the solenoid valve not operating. The following troubleshooting methods should be used:

(1) Loose or detached N-connector of the solenoid valve will prevent it from being energized. Tighten the wire. (2) If the solenoid valve coil is burnt out, disconnect the solenoid valve wiring and measure with a multimeter. If it is open-circuited, the solenoid valve coil is burnt out. This can be caused by the coil being subjected to heat, leading to poor insulation and magnetic leakage, resulting in excessive current and burnout. Therefore, prevent rainwater from entering the solenoid valve. Additionally, an overly stiff spring, excessive reaction force, or too few coil turns and insufficient suction can also cause the coil to burn out.

(3) If the solenoid valve is stuck, the clearance between the valve sleeve and the valve core is very small. When mechanical impurities are introduced or the valve body is rusted, it can easily become stuck. The fundamental solution is to disassemble the solenoid valve, remove the N core and valve core sleeve, and clean them with CCI4 to ensure the valve core moves freely within the valve sleeve. During disassembly, pay attention to the assembly sequence of each component and the position of the external wiring to ensure correct reassembly and wiring. 4) If it is a pilot-operated solenoid valve, check if the differential pressure in the pipeline is too small. If the differential pressure is too small, the solenoid valve will not work properly. In this case, a direct-acting solenoid valve should be selected. If the differential pressure is too large, far exceeding the design value of the solenoid valve N, it will also not work properly. In this case, a high-performance solenoid valve should be used.

(5) If dirt in the pipeline blocks the small orifice of the pilot valve, the pilot valve cannot open properly, and the main valve cannot open in time. The valve body can be disassembled, the dirt cleaned, and reassembled to restore normal operation. (6) In addition, solenoid valves are generally installed horizontally. If they are side-mounted, it may cause the valve to not close tightly, i.e., internal leakage. Side-mounting should be avoided as much as possible.

ATOS solenoid valves consist of an electromagnetic coil and a magnetic core, and are a valve body containing one or more orifices. When the coil is energized or de-energized, the operation of the magnetic core will cause the flow to pass through the valve body or be cut off, so as to change the direction of the fluid. The electromagnetic components of the solenoid valve consist of a stationary iron core, a moving iron core, a coil, etc.; the valve body consists of a spool, a spool sleeve, a spring base, etc. The electromagnetic coil is directly mounted on the valve body, and the valve body is enclosed in a sealing tube, forming a simple and compact combination. The solenoid valves commonly used in our production include two-position two-way and two-position three-way valves. The term "two positions" refers to energized and de-energized states for a solenoid valve, and open and closed states for the valve it controls. When current flows through the coil, it generates an energizing effect, attracting the moving iron core to the fixed iron core. The moving iron core then drives the spool valve core and compresses the spring, changing the position of the spool valve core and thus the direction of fluid flow. When the coil is de-energized, the spring force pushes the spool valve core back, causing the moving iron core to return to its original position.

DHI-0613-X 230/50/60AC

DHI-0613-X 24DC

DHI-0614-X 24DC

DHI-0616/A-X 230/50/60AC

DHI-0618/A-X 24DC 23

DHI-0630/2/A-X 230/50/60AC 23

DHI-0630/2/A-X 24DC 23

DHI-0630/2-X 24DC

DHI-0631/1/2/A-X 24DC

DHI-0631/2/A-IX 24DC

DHI-0631/2/A-X 110/50/60AC 23

DHI-0631/2/A-X 230/50/60AC twenty three

DHI-0631/2/P-X 24DC

DHI-0631/2/WP-X 12DC 23

DHI-0631/2/WP-X 220DC 23

DHI-0631/2/WP-X 230/50/60AC

DHI-0631/2P/A-X 24DC

DHI-0631/2P-X 24DC

DHI-0631/2-X 230/50/60AC

DHI-0713-X 110/50/60AC

DHI-0713-X 230/50/60AC

DHI-0713-X 24DC

DHI-0713-X 24DC 23/PE

DHI-0714/WP-X 230/50/60AC

DHI-0714/WP-X 230/50/60AC 23 /PE

DHI-0714-X 230/50/60AC

DHI-0714-X 24DC

DHI-0715/FI/NC-X 24DC

DHI-0715-X 24DC

DHI-0716-X 24DC

---------- The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi