ATOS solenoid valve DHE-0639/C 24DC in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Fields

Chemical, Agriculture, Forestry, Animal Husbandry and Fishery, Petroleum, Energy, Comprehensive

ATOS Solenoid Valve DHE-0639/C 24DC in Stock

ATOS Cylinder, ATOS Relief Valve, ATOS Proportional Valve, ATOS Stack Valve, ATOS Solenoid Valve

Common ATOS solenoid valve malfunctions include the solenoid valve not operating. Troubleshooting should be done from the following aspects:

(1) Loose or detached N-connector of the solenoid valve; the solenoid valve will not be energized. Tighten the wire. (2) If the solenoid valve coil is burnt out, disconnect the solenoid valve wiring and measure with a multimeter. If it is open-circuited, the solenoid valve coil is burnt out. This can be caused by the coil being subjected to NJ (non-magnetic interference), leading to poor insulation and magnetic leakage, resulting in excessive current and burnout. Therefore, prevent rainwater from entering the solenoid valve. Additionally, an overly stiff spring, excessive reaction force, or too few coil turns and insufficient suction can also cause the coil to burn out.

(3) If the solenoid valve is stuck, the clearance between the valve sleeve and the valve core is very small. When mechanical impurities are introduced or the valve body is rusted, it can easily become stuck. The fundamental solution is to disassemble the solenoid valve, remove the N core and valve core sleeve, and clean them with CCI4 to ensure the valve core moves freely within the valve sleeve. During disassembly, pay attention to the assembly sequence of each component and the position of the external wiring to ensure correct reassembly and wiring. "(5) If it is a pilot-operated solenoid valve, check if the differential pressure in the pipeline is too small. If the differential pressure is too small, the solenoid valve will not work properly. In this case, a direct-acting solenoid valve should be selected. If the differential pressure is too large, far exceeding the design value of the solenoid valve N, it will also not work properly. In this case, a high-performance solenoid valve should be used.

(6) If dirt in the pipeline blocks the small hole of the pilot valve, the pilot valve cannot open properly, and the main valve cannot open in time. The valve body can be disassembled, the dirt cleaned, and reassembled to work properly.

(7) In addition, solenoid valves are generally installed horizontally. If they are side-mounted, it may cause the valve to not close tightly, i.e., internal leakage. Side-mounting should be avoided as much as possible.

ATOS solenoid valve selection criteria:

1. Select the solenoid valve according to pipeline parameters: nominal diameter (i.e., DN) and interface method

1) Determine the nominal diameter (DN) according to the inner diameter of the pipeline or the flow requirement on site;

2) Interface method: Generally, for >DN50, a flange interface should be selected; for ≤DN50, the user can choose freely according to their needs. 2. Selection of Solenoid Valves Based on Fluid Parameters: Material and Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves are preferred.

3) Fluid state: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN25, these states must be clearly distinguished.

4) Fluid viscosity: Generally, any viscosity can be selected below 50 cSt. If it exceeds this value, a high-viscosity solenoid valve should be selected.

ATOS Solenoid Valve Stock List:

DHI-0610/A-X 230/50/60AC, DHI-0610/A-X 24DC 23, DHI-0610-X 110/50/60AC, DHI-0610-X 230/50/60AC 23 DHI-0610-X 24DC, DHI-0611/A-X 24DC 23, DHI-0611/FC-X 24DC 23,

DHI-06119/A-X 24DC 23, DHI-0611-X 24DC 23, DHI-0612/A-X 24DC, DHI-0613/A-X 24DC 23, DHI-0613/WP-X 230AC, DHI-0613-X 230/50/60AC, DHI-0613-X 24DC, DHI-0614-X 24DC, DHI-0616/A-X 230/50/60AC, DHI-0618/A-X 24DC 23, DHI-0630/2/A-X 230/50/60AC 23, DHI-0630/2/A-X 24DC 23, DHI-0630/2-X 24DC, DHI-0631/1/2/A-X 24DC, DHI-0631/2/A-IX 24DC, DHI-0631/2/A-X 110/50/60AC 23, DHI-0631/2/A-X 230/50/60AC 23, DHI-0631/2/P-X 24DC, DHI-0631/2/WP-X 12DC 23, DHI-0631/2/WP-X 220DC 23, DHI-0631/2/WP-X 230/50/60AC, DHI-0631/2P/A-X 24DC, DHI-0631/2P-X 24DC, DHI-0631/2-X 230/50/60AC, DHI-0631/2-X 110/50/60AC, DHI-0631/2-X 220DC,

DHI-0631/2-X 230/50/60AC, DHI-0631/2-X 24DC, DHI-0632/2/A-X 230/50/60AC 23,

DHI-0632/2/A-X 24DC 23, DHI-0632/2-X 230/50/60AC, DHI-0632/2-X 24DC 23, DHI-0639/C-X 24DC 23, DHI-0670-X 24DC 23, DHI-0671/A-X 24DC, DHI-0671/FC-X 24DC 23, DHI-0674-X 24DC 23, DHI-0701/2-X 110/50/60AC, DHI-0710/WP-X 24DC 23, DHI-0710-X 230/50/60AC, DHI-0710-X 24DC, DHI-0711-X 24DC, DHI-0711-X 110/50/60AC 23, DHI-0711-X 230/50/60AC, DHI-0713/1-X 230/50/60AC, DHI-0713/WP-X 12DC 23, DHI-0713/WP-X 230/50/60AC 23, DHI-0713/WP-X 24DC 23, DHI-07139-X 24DC 23,

DHI-0713P 24DC, DHI-0713-X 110/50/60AC, DHI-0713-X 230/50/60AC, DHI-0713-X 24DC, DHI-0713-X 24DC 23/PE, DHI-0714/WP-X 230/50/60AC, DHI-0714/WP-X 230/50/60AC 23/PE, DHI-0714-X 230/50/60AC, DHI-0714-X 24DC, DHI-0715/FI/NC-X 24DC, DHI-0715-X 24DC, DHI-0716-X 24DC, DHI-0717-X 24DC, DHI-0718-X 230/50/60AC, DHI-0718-X 24DC, DHI-0750/2-X 24DC

The company mainly deals in European and American brands. We can source brands from any European country, including leading German brands such as: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, HIRSCHMANN industrial switches, Henschler, MURR, SCHMERSAL, SAMSON, and EPRO (Emerson's subsidiary).

We can source American brands such as MOOG, ASCO solenoid valves, MAC solenoid valves, NUMATICS, PARKER pneumatics and hydraulics, VICKERS, and ROSS.

We also source British brands such as Norgren. Italian brands OMAL, ATOS, CAMOZZI, UNIVER, and Camozzi.