ATOS proportional valve DLHZO-TEB-SN-NP-040-L71 in stock

Brand

ATOS/Italian Atos

Thank you for your interest in our products. If you would like to learn more, such as ATOS product prices, specifications, and other information, please feel free to contact us. We sincerely invite you to provide services!

ATOS Piston Pumps, ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders, ATOS Relief Valves, ATOS Proportional Valves, ATOS Stack Valves

ATOS proportional valves can control flow in two ways: One is on/off control: either fully open or fully closed, with flow either at its maximum or minimum, without intermediate states, such as ordinary solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. The other is continuous control: the valve port can be opened to any degree as needed, thereby controlling the flow rate. These valves include manually controlled ones, such as throttle valves, and electrically controlled ones, such as proportional valves and servo valves. Therefore, the purpose of using proportional valves or servo valves is to achieve throttling control of flow rate electronically (of course, pressure control can also be achieved through structural modifications). Since it's throttling control, there will inevitably be energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the pre-stage control circuit.

ATOS proportional valves have performance between servo valves and proportional valves.

Proportional directional valves are a type of proportional valve used to control flow rate and direction.

Extended Information---Automatic control of electrical proportional valves can be divided into intermittent control and continuous control. Intermittent control is on/off control. Pneumatic control systems use on/off directional valves with low operating frequencies to control the opening and closing of the air path. Pressure reducing valves regulate the required pressure, and throttling valves regulate the required flow rate. This traditional pneumatic control system requires multiple pressure reducing valves, throttling valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system structure, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by an output that changes proportionally to the input, with a certain proportional relationship between the two. Proportional control can be open-loop or closed-loop.

Structural Principle

When the input signal increases, the pilot valve 1 of the supply solenoid valve switches, while the exhaust solenoid pilot valve 7 is in the reset state. The supply pressure then enters the pilot chamber 5 from the SUP port through valve 1. The pressure in the pilot chamber rises, and this pressure acts on the diaphragm 2, opening the supply valve core 4 connected to diaphragm 2 and closing the exhaust valve core 3, generating output pressure. This output pressure is fed back to the control loop 8 via pressure sensor 6. Here, a rapid comparison and correction is performed with the target value until the output pressure is proportional to the input signal, thus demonstrating that the output pressure changes proportionally to the input signal. Because there is no nozzle-baffle mechanism, the valve is insensitive to impurities and has high reliability.

Features

1) It can achieve stepless adjustment of pressure and speed, avoiding the impact phenomenon during switching of normally open on/off valves.

2) Enables remote and program-based control.

3) Compared to intermittent control, the system is simplified with a significant reduction in components.

4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower than hydraulic systems, and it is more sensitive to load changes.

5) It uses less power, generates less heat, and produces less noise.

6) It will not cause a fire and will not pollute the environment. It is less affected by temperature changes.

DHZO-A-073-S3 20

DHZO-A-073-S5

DHZO-AE-051-S5 10

DHZO-AE-071-D5/I

DHZO-AE-071-S5/I

DHZO-AE-073-D5/I/10

DHZO-AE-073-S5 10

DHZO-AE-073-S5/I 10

DHZO-AT-073-P3 20

DHZO-ATE-073-P3/B/DP27SB 20

DHZO-T-051-L1

DHZO-T-051-L5 31

DHZO-T-071-D5

DHZO-T-071-L5 DHZO-T-071-S5

DHZO-TE-051-L5/Y 40

DHZO-TE-071-L5

DHZO-TE-071-S5 40/PE

DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7

DKZO-A-151-S5

DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40

DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5 DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5

DKZOR-A-173-L5

DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y

DKZOR-A-173-S3

DKZOR-A-173-S5

DKZOR-A-173-S5/18

DKZOR-AE-171-L5 10

DKZOR-AE-171-S5

DKZOR-AE-171-S5 10/WG

DKZOR-AE-171-S5/Y 10

DKZOR-AE-173-D5 10

DKZOR-AE-173-L5 10 DKZORC-A-151-S5/18

Our company mainly deals in European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson subsidiaries)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi

Our business scope includes:

Hydraulic components such as:

Solenoid directional valves, directional valves, check valves, stack valves, relief valves, counterbalancing valves, proportional valves, manual directional valves, flow valves, pressure reducing valves

Throttle valves, pressure control valves, back pressure valves, filling valves, flow dividers, shuttle valves, pressure relays, cartridge valves, pneumatic valves, piston pumps

Gear pumps, vane pumps, cycloidal hydraulic motors, oil coolers, hydraulic cylinders, etc. Pneumatic components include:

Air source processor assemblies, filters, pressure regulating valves, oilers, solenoid valves, pneumatic valves, angle seat valves, manual valves, pull valves, foot valves;

Mechanical valves, check valves, vacuum generators, cylinders, magnetic switches, dampers, pressure gauges, quick couplings, floating couplings;

Pressure gauge switches, water coolers, electric positioners, PU tubing, vacuum suction cups, oil filters, vibrators;

Electrical components include:

Relays, sensors, converters, proximity switches, encoders, programmable controllers;

The company maintains a large inventory, with standard parts readily available. To better serve customers in various industries, the company also distributes other spare parts, with professional sourcing channels and reasonable prices.

The company's products are widely used in industrial machinery, machine tools, plastic machinery, shoe machinery, brick machinery, metallurgy, mining, chemical industry, papermaking, coal mining, shipbuilding, etc.