ATOS proportional valve DKZOR-A-171-S5/18 in stock

Brand

ATOS/Italian Atos

ATOS Solenoid Valves, ATOS Vane Pumps, ATOS Piston Pumps, ATOS Hydraulic Pumps, ATOS Proportional Valves, ATOS Relief Valves, ATOS Stack Valves, ATOS Cartridge Valves, ATOS Amplifiers, ATOS Hydraulic Cylinders

ATOS proportional valves actually have many disadvantages: high energy consumption, prone to failure, poor contamination resistance, high price, etc. Their only advantage is their highest dynamic performance among all hydraulic valves. Because of this single advantage, servo valves are often used in many applications with high dynamic performance requirements, such as aircraft and rocket steering, and turbine speed regulation. For applications with lower dynamic requirements, proportional valves are generally preferred.

Generally speaking, servo systems seem to be closed-loop control, while proportional valves are mostly used for open-loop control. Secondly, proportional valves have more types, including proportional pressure and flow control valves, offering more flexible control than servo valves. From their internal structure, servo valves are mostly zero-overlap, while proportional valves have a certain dead zone, resulting in lower control accuracy and slower response. However, looking at development trends, especially in proportional directional flow control valves and servo valves, the performance difference between the two is gradually narrowing. Furthermore, proportional valves are significantly cheaper than servo valves and have stronger resistance to contamination.

The difference between ATOS proportional valves and servo valves is not strictly defined. Because the performance of proportional valves is constantly improving and gradually approaching that of servo valves, proportional servo valves have emerged in recent years.

The difference between ATOS proportional valves and servo valves is as follows:

1. Different drive devices. The drive device of a proportional valve is a proportional electromagnet; the drive device of a servo valve is a force motor or torque motor;

2. Different performance parameters. 2.1 Servo valves have no dead zone in the neutral position, while proportional valves do. Therefore, their applications differ. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other proportional valve structures are mainly used in open-loop control systems and closed-loop speed control systems.

2.2 Servo valves have a higher frequency response (response frequency), reaching up to around 200Hz, while proportional valves generally have a maximum frequency of tens of Hz.

2.3 Servo valves have higher requirements for hydraulic fluid, requiring fine filtration to prevent clogging, while proportional valves have lower requirements.

3. Valve core structure and machining precision differ. Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure.

4. Neutral position functions differ. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Rated pressure drop differs.

ATOS proportional valves offer performance between servo valves and proportional valves.

ATOS proportional valves are a type of proportional valve used to control flow rate and direction.

Extended Information---Automatic control of electro-proportional valves can be divided into intermittent control and continuous control. Intermittent control is on-off control. Pneumatic control systems use on-off (ON-OFF) directional valves with low operating frequencies to control the airflow. Pressure is adjusted by pressure reducing valves, and flow rate is adjusted by throttle valves. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system, but also requires manual adjustment of many components beforehand. Electro-proportional valve control is a type of continuous control, characterized by output varying with input, with a proportional relationship between the output and input. Proportional control is divided into open-loop control and closed-loop control.

ATOS Proportional Valve Features

1) Enables stepless adjustment of pressure and speed, avoiding the impact phenomenon during directional switching of normally open on-off valves.

2) Enables remote and program control.

3) Compared to intermittent control, the system is simplified, with a significant reduction in components.

4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower than hydraulic systems, and it is more sensitive to load changes.

5) Low power consumption, low heat generation, and low noise.

6) It will not cause fires and will not pollute the environment. It is less affected by temperature changes.

ATOS proportional valves can control flow in two ways: one is on/off control: either fully open or fully closed, the flow is either at its maximum or minimum, with no intermediate state, such as ordinary solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. The other is continuous control: the valve port can be opened to any degree as needed, thereby controlling the flow rate. These valves include manually controlled ones, such as throttle valves, and electrically controlled ones, such as proportional valves and servo valves. Therefore, the purpose of using proportional valves or servo valves is to achieve flow throttling control electronically (of course, pressure control can also be achieved through structural modifications). Since it is throttling control, there will inevitably be energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the pre-stage control circuit.

ATOS proportional valve

DHZO-T-051-L1

DHZO-T-051-L5 31

DHZO-T-071-D5

DHZO-T-071-L5

DHZO-T-071-S5

DHZO-TE-051-L5/Y 40

DHZO-TE-071-L5

DHZO-TE-071-S5 40/PE

DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7

DKZO-A-151-S5

DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40 DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5

DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5

DKZOR-A-173-L5

DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y

DKZOR-A-173-S3

DKZOR-A-173-S5

DKZOR-A-173-S5/18

DKZOR-AE-171-L5 10

DKZOR-AE-171-S5 DKZOR-AE-171-S5 10/WG

DKZOR-AE-171-S5/Y 10

DKZOR-AE-173-D5 10

DKZOR-AE-173-L5 10

DKZORC-A-151-S5/18

DKZOR-T-151-L5

DKZOR-T-151-L5/Y

DKZOR-T-153-L5

DKZOR-T-171-D5

DKZOR-T-171-L5

DKZOR-T-171-S5

DKZOR-T-171-S5/Y

DKZOR-T-173-L5 40

DKZOR-TE-170-L5 40

DKZOR-TE-171-L5 DKZOR-TE-171-L5/I 40

DKZOR-TE-171-S5

DKZOR-TE-171-S5/Y

DKZOR-TE-173-L5 40

Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, Vickers, Helón (Norgren)

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi