ATOS proportional valve DHZO-TEB-SN-NP-071-S5 in stock

Brand

ATOS/Italian Atos

Differences between ATOS proportional valves and servo valves:

ATOS proportional valves differ mainly in the following aspects:

1. Different drive devices. The drive device for proportional valves is a proportional electromagnet; the drive device for servo valves is a force motor or torque motor;

2. Different performance parameters. Characteristics such as hysteresis, dead zone, bandwidth, and filtration accuracy differ, thus leading to different applications. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other types of proportional valves are mainly used in open-loop control systems and closed-loop speed control systems;

2.1 Servo valves have no dead zone at mid-position, while proportional valves do;

2.2 Servo valves have a higher frequency response (response frequency), reaching up to approximately 200Hz, while proportional valves generally have a maximum frequency of tens of Hz;

2.3 Servo valves have higher requirements for hydraulic fluid, requiring fine filtration to prevent clogging, while proportional valves have lower requirements;

3. Different valve core structures and machining precision. Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure.

4. Different neutral position functions. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Different rated pressure drops.

Proportional servo valves have performance between servo valves and proportional valves.

ATOS proportional valves are a type of proportional valve used to control flow rate and direction.

ATOS proportional valve extended information---Automatic control of electrical proportional valves can be divided into intermittent control and continuous control. Intermittent control is on/off control. Pneumatic control systems use on/off directional valves with low operating frequency to control the opening and closing of the air path. Pressure reducing valves regulate the required pressure, and throttle valves regulate the required flow rate. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only requires more components, increases cost, and complicates the system, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by output that changes proportionally to input, with a certain proportional relationship between the two. Proportional control can be divided into open-loop and closed-loop control.

ATOS Proportional Valve Features:

1) Enables stepless adjustment of pressure and speed, avoiding the impact phenomenon during directional switching of normally open on/off pneumatic valves.

2) Enables remote and program control.

3) Compared to intermittent control, the system is simplified, with a significant reduction in components.

4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower and it is more sensitive to load changes.

5) Low power consumption, low heat generation, and low noise.

6) Does not cause fires and does not pollute the environment. It is less affected by temperature changes.

ATOS proportional valves can control flow in two ways: one is on/off control: either fully open or fully closed, with flow either at maximum or minimum, without intermediate states, such as ordinary solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. Another type is continuous control: the valve port can be opened to any degree as needed, thereby controlling the flow rate. These valves can be manually controlled, such as throttle valves, or electrically controlled, such as proportional valves and servo valves. Therefore, the purpose of using proportional valves or servo valves is to achieve flow control through electrical means (of course, pressure control can also be achieved through structural modifications). Since it is flow control, there will inevitably be energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the upstream control circuit.

ATOS proportional valves

DHZO-TE-071-S5 40 PE (now upgraded to DHZO-TEB-SN-NP-071-S5 10/PE)

DHZO-AE-073-S5/I 10

DHZO-AT-073-P3 20

DHZO-ATE-073-P3/B/DP27SB 20

DHZO-T-051-L1

DHZO-T-051-L5 31

DHZO-T-071-D5

DHZO-T-071-L5

DHZO-T-071-S5

DHZO-TE-051-L5/Y 40

DHZO-TE-071-L5

DHZO-TE-071-S5 40 /PE DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7

DKZO-A-151-S5

DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40

DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5

DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5

DKZOR-A-173-L5 DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y

DKZOR-A-173-S3

DKZOR-A-173-S5

DKZOR-A-173-S5/18

DKZOR-AE-171-L5 10

DKZOR-AE-171-S5

DKZOR-AE-171-S5 10/WG

DKZOR-AE-171-S5/Y 10

DKZOR-AE-173-D5 10

DKZOR-AE-173-L5 10

DKZORC-A-151-S5/18

DKZOR-T-151-L5

DKZOR-T-151-L5/Y

DKZOR-T-153-L5 DKZOR-T-171-D5

DKZOR-T-171-L5

DKZOR-T-171-S5

DKZOR-T-171-S5/Y

DKZOR-T-173-L5 40

DKZOR-TE-170-L5 40

DKZOR-TE-171-L5

DKZOR-TE-171-L5/I 40

DKZOR-TE-171-S5

DKZOR-TE-171-S5/Y

DKZOR-TE-173-L5 40 Our company mainly deals in European and American products. We have offices in Germany and the United States, allowing us to source brands from any European country. Our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi