ATOS proportional valve DHZO-A-073-L5 20/PE in stock

Brand

ATOS/Italian Atos

ATOS Proportional Valve DHZO-A-073-L5 20/PE (In Stock)

Differences between ATOS proportional valves and servo valves:

ATOS proportional valves differ mainly in the following aspects:

1. Different drive devices. The proportional valve is driven by a proportional solenoid; the servo valve is driven by a force motor or torque motor;

2. Different performance parameters. 2.1 Servo valves have no dead zone in the neutral position, while proportional valves do. Therefore, their applications differ. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other proportional valve structures are mainly used in open-loop control systems and closed-loop speed control systems.

2.2 Servo valves have a higher frequency response (response frequency), reaching up to around 200Hz, while proportional valves generally have a maximum frequency of tens of Hz.

2.3 Servo valves have higher requirements for hydraulic fluid, requiring fine filtration to prevent clogging, while proportional valves have lower requirements.

3. Valve core structure and machining precision differ. Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure.

4. Neutral position functions differ. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Rated pressure drop differs.

Proportional servo valves offer performance between servo valves and proportional valves.

ATOS proportional valves are a type of proportional valve used to control flow rate and direction.

ATOS proportional valve extended information: Automatic control of electro-proportional valves can be divided into intermittent control and continuous control. Intermittent control is on-off control. Pneumatic control systems use on-off (ON-OFF) directional valves with low operating frequencies to control the airflow. Pressure is adjusted by pressure reducing valves, and flow rate is adjusted by throttle valves. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by output varying with input, and a proportional relationship exists between the output and input. Proportional control is divided into open-loop control and closed-loop control.

ATOS Proportional Valve Features:

1) Enables stepless adjustment of pressure and speed, avoiding the shock phenomenon during directional switching of normally open on/off pneumatic valves.

2) Enables remote and program control.

3) Simplifies the system and greatly reduces the number of components compared to intermittent control.

4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower and it is more sensitive to load changes.

5) Low power consumption, low heat generation, and low noise.

6) Does not cause fires and does not pollute the environment. It is less affected by temperature changes.

ATOS proportional valves can control flow in two ways: On/off control: either fully open or fully closed, with flow either at maximum or minimum, without intermediate states, such as ordinary solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. Continuous control: the valve can open to any degree as needed, thereby controlling the flow rate. These valves include manually controlled ones, such as throttle valves, and electrically controlled ones, such as proportional valves and servo valves. Therefore, the purpose of using proportional valves or servo valves is to achieve flow throttling control electronically (of course, pressure control can also be achieved through structural modifications). Since it is throttling control, there will inevitably be energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the pre-stage control circuit.

ATOS proportional valve

DHZO-AE-073-S5 10

DHZO-AE-073-S5/I 10

DHZO-AT-073-P3 20

DHZO-ATE-073-P3/B/DP27SB 20

DHZO-T-051-L1

DHZO-T-051-L5 31

DHZO-T-071-D5

DHZO-T-071-L5

DHZO-T-071-S5

DHZO-TE-051-L5/Y 40

DHZO-TE-071-L5

DHZO-TE-071-S5 40/PE

DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7 DKZO-A-151-S5

DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40

DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5

DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5

DKZOR-A-173-L5

DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y DKZOR-A-173-S3

DKZOR-A-173-S5

DKZOR-A-173-S5/18

DKZOR-AE-171-L5 10

DKZOR-AE-171-S5

DKZOR-AE-171-S5 10/WG

DKZOR-AE-171-S5/Y 10

DKZOR-AE-173-D5 10

DKZOR-AE-173-L5 10

DKZORC-A-151-S5/18

DKZOR-T-151-L5

DKZOR-T-151-L5/Y

DKZOR-T-153-L5

DKZOR-T-171-D5

DKZOR-T-171-L5 DKZOR-T-171-S5

DKZOR-T-171-S5/Y

DKZOR-T-173-L5 Company 40 mainly deals in European and American brands and can purchase brands from any European country. For example, its advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi