ATOS piston pump PVPC-LZQZ-4046/1D/18 in stock

Brand

ATOS/Italian Atos

Application Areas

Chemical, Petroleum, Mining, Road/Rail/Shipbuilding, Comprehensive

Thank you for your interest in our products. If you would like to learn more, such as the price and specifications of Italian ATOS products, please feel free to contact us. We sincerely invite you to experience our satisfactory service!

The main causes of oil leakage in ATOS plunger pumps are as follows:

(1) Damaged spindle oil seal or defective or scratched shaft;

(2) Excessive internal leakage, causing increased pressure at the oil seal, which damages or blows out the seal;

(3) Excessively thin or long drain pipe, causing oil leakage at the seal;

(4) Loose external oil pipe, damaged pipe joint, aged or cracked gasket;

(5) Loose bolts in the variable adjustment mechanism, damaged seal;

(6) Sand holes or poor welding in the cast iron pump casing. Key features of the Italian ATOS piston pump:

Double piston structure, low pressure pulsation, and long sapphire ball life;

Imported sapphire pistons and balls ensure accurate flow;

Communicates with a computer via RS232 interface for direct computer control;

Contact media materials are resistant to organic solvent corrosion;

Built-in overpressure protection and flow correction system;

Large LCD display;

Carefully designed venting device effectively removes air bubbles from the pumped liquid;

Flow and pressure settings can be memorized; Communication with PLC is possible (customizable);

ATOS piston pump software functions:

Real-time display of current pressure, set pressure, and set flow rate; Real-time curve display of pump operating pressure; Flow and pressure can be set in two ways for quick and practical use; Timer function for easy setting of pump operating time; Saves current operating pressure for easy viewing; Prints important parameters such as current pressure.

ATOS plunger pump stock list:

PVPC-C-4046/1D

PVPC-C-4046/1S

PVPC-C-5073/1D

PVPC-C-5073/1S 10

PVPC-CH-5073/1D-IX 24DC

PVPC-CZ-5073/1D 12

PVPC-LQZ-5073/1D 11

PVPC-LW-4046/1D 10

PVPC-LZQZ-3029/1D

PVPC-LZQZ-3029/1D/18

PVPC-LZQZ-4046/1D

PVPC-LZQZ-4046/1D/18

PVPC-LZQZ-5073/1D 11 PVPC-LZQZ-5073/1D/18

PVPC-R-3029/1D 11

PVPC-R-4046/1D 11

PVPC-SLE-3029/10 20

PVPC-SLE-4046/1D 20

PVPCX2E-C-3029/31036/1D 10

PVPCX2E-LW-3029/31036/1D 10

PVPC-C-3029

PVPC-C-4046

PVPC-C-5073

PVPC-C-5090

PVPC-CH-3029

PVPC-CH-4046

PVPC-CH-5073

PVPC-CH-5090

PVPC-R-3029 PVPC-R-4046

PVPC-R-5073

PVPC-R-5090

PVPC-L-3029

PVPC-L-4046

PVPC-L-5073

PVPC-L-5090

PVPC-LW-3029

PVPC-LW-4046

PVPC-LW-5073

PVPC-LW-5090

Working Principle of Italian ATOS Piston Pumps

The Italian ATOS piston pump is an important component of a hydraulic system. It relies on the reciprocating motion of a piston within a cylinder to change the volume of the sealed working chamber, thereby achieving oil suction and pressure. Piston pumps offer advantages such as high rated pressure, compact structure, high efficiency, and convenient flow rate adjustment, and are widely used in high-pressure, high-flow-rate applications where flow rate regulation is required, such as hydraulic presses, construction machinery, and ships.

The Italian ATOS piston pump is a type of reciprocating pump, belonging to the category of positive displacement pumps. Its piston is driven by the eccentric rotation of the pump shaft, resulting in a reciprocating motion. Both its suction and discharge valves are one-way valves. When the piston is pulled outward, the pressure in the working chamber decreases, the outlet valve closes, and when the pressure is lower than the inlet pressure, the inlet valve opens, allowing liquid to enter. When the piston is pushed inward, the pressure in the working chamber increases, the inlet valve closes, and when the pressure is higher than the outlet pressure, the outlet valve opens, allowing liquid to exit. When the drive shaft rotates the cylinder block, the swashplate pulls the piston out of or pushes it back into the cylinder block, completing the suction and discharge process. The oil in the working chamber formed by the piston and cylinder bore communicates with the pump's suction and discharge chambers through a distribution plate. A variable displacement mechanism is used to change the swashplate angle; adjusting the swashplate angle changes the pump's displacement.

The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi