ATOS hydraulic cylinder CK-32/14*0400-N208 in stock

Brand

ATOS/Italian Atos

Application Areas

Environmental Protection, Chemical Industry, Petroleum, Pharmaceutical/Biopharmaceutical, Comprehensive

ATOS Proportional Valves, ATOS Stack Valves, ATOS Solenoid Valves, ATOS Amplifiers, ATOS Solenoid Directional Valves, ATOS Pressure Reducing Valves, ATOS Safety Valves

Advantages and Disadvantages of Italian ATOS Hydraulic Cylinders:

1. Since pneumatic systems generally operate at pressures within the range of 0.2-1.0 MPa, pneumatic cylinders cannot be used as high-power power components in hydraulic cylinders. Hydraulic cylinders, however, can be used as higher-power components, or hydraulic cylinder systems can be employed.

2. Air is an inexhaustible medium, eliminating cost and supply difficulties. Used air can be directly discharged into the atmosphere, making disposal convenient and preventing hydraulic oil contamination.

3. Air has low viscosity, resulting in less resistance than hydraulic oil.

4. However, because air has a much higher compressibility than hydraulic oil, its operational smoothness and responsiveness are significantly inferior.

Machining of Italian ATOS Hydraulic Cylinders: As a key component in hydraulic cylinders, mining single-pillar supports, hydraulic supports, and gun barrels, the quality of cylinder machining directly affects the lifespan and reliability of the entire product. Cylinder machining requires high precision, with an internal surface roughness requirement of Ra 0.4–0.8µm, and strict requirements for coaxiality and wear resistance. A fundamental characteristic of cylinders is deep-hole machining, which has always been a challenge for machining personnel. Roller burnishing, by leaving residual compressive stress on the surface layer, helps to close micro-cracks and hinders the propagation of corrosion. This improves surface corrosion resistance and delays the initiation or propagation of fatigue cracks, thus increasing the cylinder's fatigue strength. Through roller burnishing, a work-hardened layer is formed on the surface, reducing the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the cylinder's inner wall and preventing burns caused by grinding. The reduced surface roughness after roller burnishing improves the fit.

Working Principle of Italian ATOS Hydraulic Cylinders:

The working principle of Italian ATOS hydraulic cylinders mainly involves five components. First, let's talk about its five basic components: 1-cylinder barrel and cylinder head, 2-piston and piston rod, 3-sealing device, 4-buffer device, 5-venting device.

The working principle of each type of cylinder is almost the same. Take a manual jack as an example. The jack is actually just a simple hydraulic cylinder. The hydraulic oil is pushed into the cylinder through a one-way valve by the manual booster rod (hydraulic manual pump). At this time, the hydraulic oil entering the cylinder cannot go back because of the one-way valve, forcing the cylinder rod to move upward. Then, the hydraulic oil continues to enter the hydraulic cylinder during operation, and it continues to rise. When it is time to fall, the hydraulic valve is opened to let the hydraulic oil return to the oil tank. This is the simple working principle. Other cylinders are improved on this basis. The principle of the pneumatic cylinder is basically the same as that of the hydraulic cylinder. [1]

The Italian ATOS hydraulic cylinder is a linear motion actuator whose output force is proportional to the effective area of ​​the piston and the pressure difference on both sides. Its function is to convert hydraulic energy into mechanical energy. The input of the hydraulic cylinder is the flow rate and pressure of the fluid, and the output is the linear motion speed and force. A hydraulic cylinder's piston can perform linear reciprocating motion, but the output linear displacement is finite. A hydraulic cylinder is an energy conversion device that converts hydraulic energy into reciprocating linear motion mechanical energy. A hydraulic cylinder basically consists of a cylinder barrel and cylinder head, a piston and piston rod, a sealing device, a cushioning device, and a venting device. The cushioning and venting devices depend on the specific application; the other devices are...

Italian ATOS Hydraulic Cylinders

CK-25/18*0050-N001 Hydraulic Cylinder

CK-25/18*0050-N001 Hydraulic Cylinder

CK-25/18*0050-N001 Hydraulic Cylinder

CK-25/18*0055-N001 Hydraulic Cylinder

CK-32/14*0040-N001 Hydraulic Cylinder

CK-32/14*0040-N001 Hydraulic Cylinder

CK-32/14*0125-P801 Hydraulic Cylinder

CK-32/14*0125-P801 Hydraulic Cylinder CK-32/14*0140-D901 Hydraulic Cylinder

CK-32/14*0140-D901 Oil Cylinder

CK-32/14*0140-D901

CK-32/14*0280-C901 Hydraulic Cylinder

CK-32/14*0280-C901 Oil Cylinder

CK-32/14*0280-C901

CK-32/14*0280-C908 Hydraulic Cylinder

CK-32/14*0280-C908 Oil Cylinder

CK-32/14*0280-C908

CK-32/14*0280-D901 Hydraulic Cylinder

CK-32/14*0280-D901 Oil Cylinder

CK-32/14*0280-D901 CK-32/22*0040-P001 Hydraulic Cylinder

CK-32/22*0040-P001 Oil Cylinder

CK-32/22*0040-P001

CK-32/22*0050-P001 Hydraulic Cylinder

CK-32/22*0050-P001 Oil Cylinder

CK-32/22*0065-N001 Hydraulic Cylinder

CK-32/22*0065-N001 Oil Cylinder

CK-32/22*0065-N001

CK-32/22*0090-P001 Hydraulic Cylinder

CK-32/22*0090-P001 Oil Cylinder CK-32/22*0100-N001 Hydraulic Cylinder

CK-32/22*0100-N001 Oil Cylinder

CK-32/22*0100-N001

CK-32/22*0120-N001 Hydraulic Cylinder

CK-32/22*0120-N001 Oil Cylinder

CK-32/22*0150-N001 Hydraulic Cylinder

CK-32/22*0150-N001 Oil Cylinder

CK-32/22*0192-C301 Hydraulic Cylinder

CK-32/22*0192-C301 Oil Cylinder CK-32/22*0200-N001 Hydraulic Cylinder

CK-32/22*0200-N001 Oil Cylinder

CK-32/22*0200-N001

CK-32/22*0220-N001 Hydraulic Cylinder

CK-32/22*0220-N001 Oil Cylinder

CK-32/22*0220-N001

CK-32/22*0250-N001 Hydraulic Cylinder

CK-40/18*0100-D901 Hydraulic Cylinder

CK-40/18*0100-D901 Oil Cylinder

CK-40/18*0100-D901 The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi