ATOS amplifier E-ME-T-05H 40/DH07SA in stock

Brand

ATOS/Italian Atos

Origin Category

Imported

Application Fields

Environmental Protection, Biotechnology, Petroleum, Electrical, Comprehensive

ATOS amplifiers are important components of transmitting devices in communication systems. Based on their operating frequency band, they are divided into narrowband high-frequency power amplifiers and wideband high-frequency power amplifiers. Narrowband high-frequency power amplifiers typically use frequency-selective circuits with frequency filtering capabilities as their output circuit, hence they are also called tuned power amplifiers or resonant power amplifiers. Wideband high-frequency power amplifiers use transmission line transformers or other wideband matching circuits as their output circuit, therefore they are also called untuned power amplifiers. A high-frequency power amplifier is an energy conversion device that converts DC energy supplied by a power source into high-frequency AC output. As known in the course "Low-Frequency Electronic Circuits," amplifiers can be classified into three classes (A, B, and C) based on their current conduction angle. Class A amplifiers have a current conduction angle of 360°, suitable for small-signal, low-power amplification. Class B amplifiers have a current conduction angle of approximately 180°; Class C amplifiers have a current conduction angle of less than 180°. Both Class B and Class C amplifiers are suitable for high-power operation. Class C amplifiers offer the highest output power and efficiency among the three operating modes. Most high-frequency power amplifiers operate in Class C. However, Class C amplifiers suffer from excessive current waveform distortion, making them unsuitable for low-frequency power amplification. They are best suited for resonant power amplification using a tuned circuit as the load. Because the tuned circuit has filtering capabilities, the circuit current and voltage remain very close to a sinusoidal waveform, resulting in minimal distortion.

ATOS amplifier stock list:

E-ME-T-01H 40/DH04SA

E-ME-T-01H 40/DH05SA

E-ME-T-01H 40/DK14SC

E-ME-T-01H 40/DK15SB

E-ME-T-01H 40/QV0NSA

E-ME-T-01H 40/TK14AA

E-ME-T-01H 40/TK14SC

E-ME-T-01H 40/TQ25SA

E-ME-T-01H 40/TQ32SA

E-ME-T-01H 40/TQ42SA

E-ME-T-01H 40/DK14SC

E-ME-T-01H 40/DK15SB

E-ME-T-01H 40/QV1NSB

E-ME-T-01H 40/TQ25SA

E-ME-T-01H/I 40 /DH04SA

E-ME-T-01H/I 40/DK14SC

E-ME-T-01H/I 40 /DP25SB

E-ME-T-01H/I 40 /DP25SC

E-ME-T-01H/I 40 /QV0NSA

E-ME-T-01H/I 40/TQ25SA

E-ME-T-01H/I 40/DK15SB

E-ME-T-01H/I 40/QVONSA

E-ME-T-01H/I 40/TQ25SA

E-ME-T-05H 40/DH07SA

E-ME-T-05H 40 /DK17SA

E-ME-T-05H 40 /DK17SB

E-ME-T-05H 40 /DP27SB

E-ME-T-05H 40/DH07SA

E-ME-T-05H 40/DK17SB

E-ME-T-05H 40/DP27SB

E-ME-T-05H/I 40 /DK17SB

E-ME-T-05H/I 40 /DP27SB

ATOS Amplifier Main Principle:

An ATOS amplifier is essentially an analog Fourier transform. The output of the lock-in amplifier is a DC voltage, proportional to the amplitude of the input signal at a specific frequency (parameter input frequency). Other frequency components in the input signal will not contribute to the output voltage.

An ATOS amplifier uses two sinusoidal signals, both 1Hz in frequency, with a 90-degree phase difference. Multiplying them with a multiplier results in a sinusoidal signal with DC bias. If you multiply a 1Hz signal and a 1.1Hz signal using a multiplier, the result will be a modulated signal with a sinusoidal profile and a DC bias of 0.

Our company primarily deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi