Estimated Lead Time: 6-8 Weeks

Manufacturer: Honeywell

2" NPT, 2 PSI

V4295A1064

2 in. NPT Solenoid, N.C. Gas Valve

V4295A/V8295A normally closed and V4295S/V8295S normally open (vent) solenoid gas valves, are suitable for furnaces, ovens, atmospheric burners, commercial

water heaters, roof-top make-up air units, power burners, and commercial/industrial boilers.

V8295A,S are used with 24 Vac controllers.

V4295A,S are used with 120 Vac controllers.

Positive close off of gas flow when de-energized.

High valve spring force allows up to 0.7 psi back pressure at valve seat.

No inlet pressure influence at valve seat.

Inlet pressure changes do not affect ability to close valve.

Low operating noise.

Low rush-in current.

Upstream and downstream taps allows tapping and testing pressure points.

Dimensions (in.):8 3/8 in. high x 6 11/16 in. wide x 5 3/8 in. deep

Dimensions (mm): 213 mm high x 170 mm wide x 137 mm deep

Materials: Body--Die-cast aluminum

Mounting: Vertical to 90 degrees from vertical

Frequency : 50 Hz; 60 Hz

Approvals, Underwriters Laboratories Inc.: Listed: File No. MH18476, V1, S1 - Guide No. YIOZ

Approvals, CSA: Certificate No. 158158-1154280, Guide No. C3371-03, 04, 83

Electrical Connections: Screw terminals

Voltage: 120 Vac

Operating Temperature Range (F): -40 F to +140 F

Operating Temperature Range (C): -40 C to +60 C

Approvals, Control Safety Devices: Acceptable

Approvals, Swiss RE: Acceptable

Approvals, Factory Mutual: Approved: Report No. J.I.OD6A2.AF

Current Ratings: 0.525 max amps at rated Vac/Hz

Body Pattern: Straight-through, non-offset

Pressure Ratings (psi): 2 psi

Pressure Ratings (kPa): 13.8 kPa

Capacity (mæ¤/hr): 98.1 m3/hr

Pressure Tapping:Inlet and outlet pressure taps-- 1/4 in. NPT

Type of Fuel:Air; natural; manufactured; mixed; LP

Pipe Size (inch):2 in.

Pipe Size (DN):DN50

Capacity (cfh):3465 cfh

Valve Opening Time: less than 1 sec

Valve Closing Time: less than 1 sec

Shipping Weight: 7 Kg