REXROTH solenoid valve 4WRAE10W1-60-2X/G24K in stock.

Brand

REXROTH/Germany Rexroth

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Chemical, Petroleum, Energy, Electrical, General

REXROTH Control Valves, REXROTH Solenoid Valves, REXROTH Cylinders, REXROTH Piston Pumps, REXROTH Relief Valves

REXROTH Solenoid Valves

REXROTH solenoid valves are electromagnetically controlled industrial devices, fundamental components of automation used to control fluids. They are actuators, not limited to hydraulic or pneumatic systems. They are used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each playing a different role in the control system. Commonly used types include check valves, safety valves, directional control valves, and speed control valves.

REXROTH solenoid valves contain a sealed chamber with through-holes at different locations, each connecting to a different oil pipe. Inside the chamber is a piston, flanked by two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side, thus controlling the valve body's movement to open or close different drain ports. The inlet port is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the flow of current to the electromagnets controls the mechanical movement.

The selection of REXROTH solenoid valves should first follow four principles in order of priority: safety, reliability, applicability, and economy. Secondly, it should be based on six aspects of the on-site operating conditions (i.e., pipeline parameters, fluid parameters, pressure parameters, electrical parameters, actuation method, and special requirements). REXROTH Solenoid Valve Selection Criteria:

1. Selection of Solenoid Valves Based on Pipeline Parameters: Nominal Diameter (DN), Connection Type

1) Determine the nominal diameter (DN) based on the inner diameter of the pipeline or flow requirements.

2) Connection type: Generally, for DN > 50, a flange connection should be selected; for DN ≤ 50, the connection type can be freely selected according to user needs.

2. Selection of Solenoid Valves Based on Fluid Parameters: Material, Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-Temperature Fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves should be chosen.

3) Fluid State: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN 25, it is essential to distinguish between these states.

4) Fluid Viscosity: Generally, any choice is acceptable below 50 cSt; if it exceeds this value, a high-viscosity solenoid valve should be selected. 3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structural Types

1) Nominal Pressure: This parameter has the same meaning as other general-purpose valves, determined by the nominal pressure of the pipeline.

2) Working Pressure: If the working pressure is low, a direct-acting or step-direct-acting principle must be selected. For working pressure differentials above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected.

4. Electrical Selection: For voltage specifications, AC220V or DC24V should be prioritized for convenience. REXROTH Solenoid Valves

REXROTH Solenoid Valves

1/4" Two-Position Three-Way Manual Directional Valve 2HA-1/P59331(1/4)R431004994

1/4" Foot Throttle Valve H-1-A/P52971-1R431003063

8" Manual Shift Valve 8P-1S/P55556-3R431003806

Sand Dredging Drum Control Valve HE-2-FX/P51612-3(1/4)R431002914

Main Drum Combination Valve HD-2-FX/P50970-1R431002823

1/4" Foot Throttle Valve H-1/P50208-1R431002613

3" Four-Way Valve 2HA-2/P59335R431005003 Handwheel pressure regulating valve H-4/P050967-2R431002819

Three-position four-way valve with double lock PD40041-0098R431008258

Eight-position cylinder 8P/P55557-3R431003808

Three-position four-way valve HC-2-X/P50975-3R431002837

2-HA-2L/P061966-00000R431005927

3P/P057378-00375R431004053

Main drum pressure regulating valve HD-2-X/P050973-0003R431002833

H-2-LX/P50499-3R431002654

Hand throttle H-4/P50967-3R431002820

Driller's Valve HD-2-X/P050973-1R431002831

Quick Exhaust Valve P52935-4R431003040

4-S/P55161R431003664

6-S/P55162R431003665

Rotary Combination Valve HC-2-LX/P55582-3R431003826

2HA-1L/P59332-1R431004997

2HA-1R/P59333R431005000

2HA-2L/P59336-3R431005006

Air Pilot Valve 2-HA-2Z/P059339-0R431005013

Throttle Controller P060266-1 R431005441

2-HA-3/P61266R431005733

H-2-FX/P068521-00002R431007308

HD-2-FX/P50970-3R431002825

The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS

British brands: Helon Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi