- Estimated Lead Time : In stock. Usually ships in 7-10 working days
- Manufacturer : Mitsubishi Electric
- Series name : MELSERVO-J4 series
- Command interface : 2-axis integrated SSCNET III / H interface
- Voltage class : 200V
- capacity [kW] : 1
- Servo amplifier model name : MR-J4W2-1010B
- output- Rated voltage : Three phase AC 170 V
- output- Rated current (each axis) [A] : 6.0
- Main circuit power input - Voltage / frequency : Three-phase AC 200 V to 240 V, 50 Hz / 60 Hz
- Main circuit power input - Rated current [A] : 9.8
- Main circuit power input - Permissible voltage fluctuation : Three-phase AC170 V to 264 V
- Main circuit power input - Permissible frequency fluctuation : Within _ 5%
- Control circuit power input- Voltage / frequency : Single phase AC 200 V to 240 V, 50 Hz / 60 Hz
- Control circuit power input- Rated current [A] : 0.4
- Control circuit power input- Permissible voltage fluctuation : Single phase AC 170 V to 264 V
- Control circuit power input- Permissible frequency fluctuation : Within _ 5%
- Control circuit power input- power consumption [W] : 55
- Interface power supply : DC24 V _ 10% (Required current capacity: 0.35 A (including CN8 connector signal))
- control method : Sine wave PWM control and current control method
- Capacitor regeneration- Reusable regenerative energy [J] : 44
- Capacitor regeneration- Allowable charge equivalent moment of inertia J [_ 10-4 kg ??m 2 ] : 8.92
- Capacitor regeneration- Allowable charge equivalent mass [kg] LM-H3 : 9.8
- LM-K2 LM-U2 : 22.0
- Permissible regenerative power of servo amplifier built-in regenerative resistor [W] : 100
- Dynamic brake : Built-in
- SSCNET III / H command communication cycle : 0.222 ms, 0.444 ms, 0.888 ms
- Communication function : USB: Connection to a personal computer etc. (compatible with MR Configurator2)
- Encoder output pulse : Correspondence (AB phase pulse)
- Analog monitor : None
- Full closed control : Correspondence
- Machine end encoder interface : Mitsubishi Electric high-speed serial communication
- Servo function : Advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, touch control, mechanical diagnosis function, power monitor function, scale measurement function, J3 compatible mode
- Protection function : Overcurrent shutoff, regenerative overvoltage shutoff, overload shutoff (electronic thermal), servomotor overheat protection, encoder abnormal protection, regenerative abnormal protection, undervoltage protection, instantaneous blackout protection, overspeed protection, error excessive protection, magnetic pole detection protection, linear Servo control error protection
- Functional safety : STO (IEC / EN 61800-5-2)
- Safety performance- Third-party certification standard : EN ISO 13489-1 Category 3 PL e, IEC 61508 SIL 3, EN 62061 SIL CL 3, EN 61800-5-2
- Safety performance- Response performance : 8 ms or less (STO input off ??energy cut off)
- Safety performance- Test pulse input (STO) : Test pulse interval: 1 Hz to 25 Hz Test pulse off time: up to 1 ms
- Safety performance- Expected mean dangerous side failure time (MTTFd) : MTTFd 100 100 [years] (314a)
- Safety performance- Diagnostic range (DC) : DC = Medium (Medium), 97.6 [%]
- Safety performance- Mean probability of dangerous failure (PFH) : PFH = 6.4 _ 10 -9 [1 / h]
- Overseas compliance standards : For compliance with overseas standards and laws, please refer to the page that conforms to the standards .
- Structure (class of protection) : Strong chill, open (IP20)
- Tight attachment : OK
- Environmental condition - Ambient temperature : Operation: 0 _ C to 55 _ C (without freezing), Storage: -20 _ C to 65 _ C (without freezing)
- Environmental condition - Ambient humidity : Operation / storage: 5% RH to 90% RH (without condensation)
- Environmental condition - atmosphere : Indoor (no direct sunlight), no corrosive gas, flammable gas, oil mist and dust
- Environmental condition - elevation : Less than 2000 m above sea level
- Environmental condition - Vibration resistance : 5.9 m / s 2 , 10 Hz to 55 Hz (X, Y, Z directions)
- mass [kg] : 2.0
- About restrictions : Since restrictions are not displayed at the time of specification comparison, please see the specifications of each model.
- Shipping Weight : 4 Kg
Distributor of Industrial Automation Parts
One Stop Sourcing and Supply
Fast delivery, reliable combined shipping
20 years of experience
Leading industry innovation
Flexible Payment
Pay in 20+ local currencies
Ship worldwide via DHL, FedEx, UPS & more

September 2, 2025
Item Number:MR-J4W2-1010B
Category: Mitsubishi
Price: $772.20 USD / €702.70 EUR
MR-J4W2-1010B -- Mitsubishi Electric -- Servo amplifier SSCNETIII / H compatible 1 kW 3 phase AC 200 V to 240 V
Details
Related Items
September 23, 2025
295Transistor Block: PM100RRS060

September 23, 2025
276Universal model QCPU Q10UDEHCPU

September 23, 2025
294Redundant PLC CPU Module: Q12PRHCPU

September 23, 2025
301Universal model QCPU Q13UDHCPU
