Newsino Energy Company

Even though we have this part in stock, it may take several days for internal process to complete. Goods will be delivered within 7-10 Working Days.
Series name : MELSERVO-J4 series
Command interface : General-purpose interface
Voltage class : 200V
Motor rated output : [KW] : Five
Servo amplifier form name : MR-J4-500A
output:-
Rated voltage : Three-phase AC170 V
Rated current : [A] : 28.0
Main circuit power input:-
Voltage and frequency : Three-phase AC200 V ~ 240 V, 50 Hz / 60 Hz
Rated current : [A] : 21.7
Allowable voltage fluctuation : Three-phase AC170 V ~ 264 V
Allowable frequency fluctuation : Within _ 5%
Control circuit power supply input:-
Voltage and frequency : Single-phase AC200 V ~ 240 V, 50 Hz / 60 Hz
Rated current : [A] : 0.3
Allowable voltage fluctuation : Single-phase AC170 V ~ 264 V
Allowable frequency fluctuation : Within _ 5%
Power consumption : [W] : 45
Interface for power : DC24 V _ 10% (required current capacity including a 0.5 A (CN8 connector signal))
control method : Sinusoidal wave PWM control and current control system
Permissible regenerative power- : Servo amplifier built-in regenerative resistor : [W] : 130
External regenerative resistor (standard accessory) : [W] : -
Dynamic brake : Built-in
Communication function : USB connection to a personal computer (MR Configurator2 corresponding)
RS-422 / RS-485 a maximum of up to 32 axes 1 n communication
Encoder output pulse : Correspondence (ABZ-phase pulse)
Analog monitor : 2 channel
Position control mode:-
Maximum input pulse frequency : 4 Mpulses / s (the time differential receiver), 200 kpulses / s (when open collector)
Positioning feedback pulse : Encoder resolution (resolution per rotation servo motor 1) 22-bit
Command pulse magnification : Electronic gear A / B double A = 1 ~ 16777215, B = 1 ~ 16777215,1 / 10 <A / B <4000
Positioning complete width setting : 0 pulse ~ _ 65535 pulses (command pulse unit)
Excessive error : _ 3 rotation
Torque limit : Parameter settings or set by external analog input (DC0 V ~ + 10 V / maximum torque)
Speed _銉ユ刊_ntrol mode:-
Speed _銉ユ刊_ntrol range : Analog speed command 1 2000, internal speed command 1 5000
Analog speed command input : DC0 V ~ _ 10 V / rated speed (rotation speed at 10 V can be changed in the [Pr. PC12])
Speed _銉ユ刊ariation rate : _ 0.01% or less (load variation 0% to 100%), 0% (power fluctuation _ 10%) _ 0.2% or less only (ambient temperature 25 _ C _ 10 _ C) when the analog speed command
Torque limit : Parameter settings or set by external analog input (DC0 V ~ + 10 V / maximum torque)
Torque control mode- : Analog torque command input : DC0 V ~ _ 8 V / maximum torque (input impedance 10 k_ ~ 12 k_)
Speed _銉ユ刊_mits : Parameter settings or set by external analog input (DC0 V ~ _ 10 V / rated speed)
Positioning mode : Non-compliant
Full-closed control : 2-wire communication method
Machine end encoder interface : Mitsubishi high-speed serial communication
Servo function : Advanced vibration suppression control ?? adaptive filter ?? robust filter, auto-tuning, one-touch adjustment, tough drive function, drive recorder function, machine diagnostic functions, the power monitor function, super trace control , lost motion correction function
Protective function : Over-current cut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheating protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection and protection, linear servo control error protection
Safety feature : STO (IEC / EN 61800-5-2)
Safe performance:-
Third party certification standards : EN ISO 13849-1 Category 3 PL e, IEC 61508 SIL 3, EN 62061 SIL CL 3, EN 61800-5-2 ()
Response performance : 8 ms or less (STO input off ??energy cut-off)
Test pulse input (STO) : Test pulse interval 1 Hz ~ 25 Hz, test pulse off time Up to 1 ms
Expected average dangerous failure time (MTTFd) : MTTFd ??100 [year] (314a)
Diagnostic coverage (DC) : DC = medium (Medium), 97.6 [%]
The average probability of a dangerous failure (PFH) : = 6.4 _ PFH 10 -9 [1 / H]
Overseas Compliance : The correspondence to the international standards and laws
Structure (protection grade) : A little over cold, open (IP20)
Contact mounting:-
Three-phase power supply input : Improper
Single-phase power supply input : -
Environmental condition:-
Ambient temperature : Operation 0 _ C ~ 55 _ C (no freezing), storage -20 _ C ~ 65 _ C (no freezing)
Ambient humidity : Operation / storage 90% RH or less (non-condensing)
atmosphere : Indoors (no direct sunlight), that there is no corrosive gas, flammable gas, oil mist, dust and dirt
elevation : Above sea level 2000 m or less
Vibration resistance : Yd 5.9 / s 2 , 10 Hz ~ 55 Hz (X-, Y-, Z-each direction)
mass : [kg] : 4.0
Shipping Weight : 5 Kg

Item Number:MR-J4-500A

Details

Related Items

pm100rrs060

q10udehcpu

q12prhcpu

q13udhcpu