MAC solenoid valve 57D-54-RA in stock

Brand

MAC/USA

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Medical & Health, Environmental Protection, Food/Agricultural Products, Agriculture, Forestry, Animal Husbandry & Fishery, Comprehensive

The selection of MAC solenoid valves should first follow four principles in order: safety, reliability, applicability, and economy. Secondly, it should be based on six aspects of the on-site working conditions (i.e., pipeline parameters, fluid parameters, pressure parameters, electrical parameters, actuation method, and special requirements).

MAC Solenoid Valve Selection Criteria:

1. Selecting the solenoid valve based on pipeline parameters: nominal diameter (DN) and connection type

1) Determine the nominal diameter (DN) according to the on-site pipeline inner diameter or flow requirements;

2) Connection type: Generally, >DN50 requires a flange connection; ≤DN50 can be freely selected according to user needs.

2. Selecting Solenoid Valves Based on Fluid Parameters: Material and Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel valves are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves are preferred.

3) Fluid state: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN25, these must be clearly distinguished.

4) Fluid viscosity: Generally, any viscosity can be selected below 50 cSt. If it exceeds this value, a high-viscosity solenoid valve should be selected.

3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structural Types

1) Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined by the nominal pressure of the pipeline.

2) Working pressure: If the working pressure is low, a direct-acting or step-direct-acting principle valve must be selected; for low working pressure differentials above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected. 4. Electrical Selection: AC220V or DC24V voltage specifications are preferred for convenience.

5. Selection Based on Continuous Operating Time: Normally Closed, Normally Open, or Continuously Energized

1) When the solenoid valve needs to be open for a long time, and the duration is longer than the closing time, a normally open type should be selected.

2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected.

3) However, for some safety protection applications, such as furnace and kiln flame monitoring, a continuously energized type cannot be selected.

6. Selection of Auxiliary Functions Based on Environmental Requirements: Explosion-proof, Check Valve, Manual Operation, Water-resistant (fogproof), Water Spray, Submersible.

Detailed Information on the MAC PPC5C Series Solenoid Valves

MAC ultra-high-speed solenoid valves are competitive with other valves in the market.

Sales and service are handled by its worldwide network of agents; MAC does not sell directly.

Many factors protect MAC's design capabilities, ensuring its expertise in pneumatic valve technology.

The following are some examples of MAC ultra-high-speed solenoid valves:

1. 1. **Coil-free design:** The coil won't burn out.

2. **Air and spring return ensure smooth and consistent valve response and prevent blockage.**

3. **Internal check accumulator design:** This ensures the valve won't skip if there's insufficient air during operation.

4. **Built-in shaft design with a larger open flow orifice for greater flow rate.**

5. **Built-in dual shafts moving within a single flow orifice shorten the valve's stroke, resulting in less wear and a longer lifespan.**

MAC Valves currently holds a 26% market share in the US, with 45% of its customers in packaging machinery, followed by sorting machinery, tire machinery, mining, automotive, electronics, aluminum, wood, paper, printing, food, and beverage industries.

MAC Valves Inc., founded in 1948, is North America's largest solenoid valve manufacturer, possessing over 70 technologies and specializing in the design and manufacture of high-performance pneumatic solenoid valves. MAC solenoid valves are renowned for their high speed, repeatability, and environmental tolerance. Due to their superior structural design and performance, MAC solenoid valves hold a 26% market share in North America. 45% of their customers are in packaging machinery, with the remainder in sorting machinery, tire machinery, mining, automotive, electronics, aluminum, timber, paper, printing, food, and beverage industries.

MAC solenoid valves, due to their superior structural design and performance, hold a 26% market share in North America. 45% of their customers are in packaging machinery, with the remainder in sorting machinery, tire machinery, mining, automotive, electronics, aluminum, timber, paper, printing, food, and beverage industries. Sorting machinery includes rice color sorters, bean color sorters, pill color sorters, coffee color sorters, and tobacco leaf sorting machines.

52A-11-COA-DM-DDJA-1JB225B-121CAAA45A-AA1-DDBA-1BA35A-ACA-DDAA-1BA35A-ACA-DDBA-1BA45A-SC1-DDAA-1BA45A-SA1-DACA-1BA45A-AC1-DACA-1BA35A-AAA-DDAJ- 1KD35A-AAA-DACA-1BA34B-ABA-GDFA-1KADMB-DDAA-1BA45A-EA1-DDAA-1BA35A-AAA-DAAA-1BA45A-SA2-DACA-1BA45A-SA1-DACA-1BA117B-111BAAA461A-DOA-DM-DJAA-1BA

MAC solenoid valve 34B-ABB-GDFA-1BA34B-ABA-GDFA-1KA35A-SCC-DABA-1BA58D-33-117AA58D-36-111JA58D-76-111JA6311D-351-PM-111DA1301G-112D-1250B-111JA45A-AC1-DDAA-1BAPID-111JA45A-SA1-DAAA-1BA55B- 12-PI-111JA45A-FA1-DACA-1BA44B-ABA-GDCA-1BC34B-AAA-GDKA-3BA166B-611JM117B-871JB6131D-36 1-PM-504DA35A-ACA-DDFJ-1KA45A-BC1-DEFJ-1JM52A-11-C0A-DM-DDFJ-1JB225B-761JJ454-AC1-DDNA-

The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS

British brands: Helon Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi