MAC solenoid valve 37A-BCO-HDAA-1BA in stock

Brand

MAC/USA

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Chemical, Petroleum, Mining, Road/Rail/Marine, General

MAC solenoid valves currently hold a 26% market share in the US. 45% of their customers are in packaging machinery, with the remainder in sorting machinery, tire machinery, mining, automotive, electronics, aluminum products, timber, paper, printing, food and beverage industries, etc. Its main features:

1. Balanced valve design, response time is unaffected by pressure changes;

2. Anti-jamming protection design for the valve core, preventing coil burnout;

3. Strong coil suction, ensuring fast and precise action;

4. Automatic wear compensation, extending valve lifespan;

5. Air isolation for the coil, extending coil lifespan;

6. Available in various sizes, M5-2 1/2" standard;

7. 18-month quality guarantee.

MAC Solenoid Valves

Selection should first follow the four principles of safety, reliability, applicability, and economy, followed by consideration of six aspects of on-site conditions (i.e., pipeline parameters, fluid parameters, pressure parameters, electrical parameters, actuation method, and special requirements).

MAC Solenoid Valves

Selection Basis:

1. Select the solenoid valve based on pipeline parameters: nominal diameter (DN) and connection method

1) Determine the nominal diameter (DN) size according to the on-site pipeline inner diameter or flow requirements;

2) Interface type: Generally, flange interfaces are required for DN50 and ≤DN50, while the choice can be made freely according to user needs.

2. Selection of solenoid valves based on fluid parameters: Material and temperature group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended;

2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type structures should be chosen;

3) Fluid state: Generally, there are gaseous, liquid, or mixed states, especially for diameters greater than DN25, it is essential to distinguish between them;

4) Fluid viscosity: Generally, any choice can be made for fluids below 50 cSt. If this value is exceeded, a high-viscosity solenoid valve should be selected.

3. Selection of solenoid valves based on pressure parameters: Principle and structural types

1) Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined based on the nominal pressure of the pipeline; 2) Working Pressure: If the working pressure is low, a direct-acting or step-direct-acting principle must be selected; for low working pressure differentials above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated types can all be selected.

4) Electrical Selection: AC220V or DC24V voltage specifications are preferred for convenience.

5) Selection based on continuous working time: Normally closed, normally open, or continuously energized

1) When the solenoid valve needs to be open for a long time, and the continuous time is longer than the closing time, a normally open type should be selected;

2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected;

3) However, for some safety protection applications, such as furnace and kiln flame monitoring, a normally open type cannot be selected; a continuously energized type should be chosen.

6) Selection of auxiliary functions based on environmental requirements: Explosion-proof, check valve, manual operation, waterproof mist, water spray, submersible.

37A-AD0-HDAA-1BA

611B-12-501BA PME-591DABE

37A-AD0-HDAA-1MA

611B-12-611JB PME-591JA

37A-ADO-HDAO-1KJ

611B-12-611JM PME-591JJ

37A-ADO-HDBA-1BA

612B-11-111BA PME-591JM

37A-ADO-HDFA-1BA

613B-11-111CA PME-592BA

37A-BCO-HDAA-1BA

613B-11-221BA PME-594JM

37A-C10-HABA-2BA

613B-11-221BA PME-594JM

37A-CI0-HABA-2BK 614B-11-111JB MOD 416Y PME-601BAAD

MAC Corporation, with its advanced design and manufacturing technology and numerous advantages, has consistently maintained its leading position in the compressed air valve manufacturing industry. Before 1980, SMC's compressed air valves were manufactured using technology purchased from MAC.

The main characteristics of MAC compressed air valves are: advanced design and manufacturing technology; rapid and reliable valve operation; long service life; low requirements for operating conditions, with no special requirements for air cleanliness (Note: Brands such as SMC and FESTO have strict requirements for air cleanliness; please refer to the relevant brand's product catalog for details); in addition, among compressed air valves of the same flow rate, MAC valves have the smallest external dimensions.

MAC products are highly popular with users due to their superior performance, competitive prices, and excellent service. Statistics show that the company's compressed air valves have a market share of up to 26% in the United States.

MAC Valves is an employee-owned company with over 1,300 employees worldwide.

For over sixty years, MAC's technology in designing and developing equipment has successfully created highly competitive products with superior advantages for industrial automation applications.

MAC product materials are all derived through rigorous testing. This equipment provides testing of responsiveness and lifespan characteristics, making its ultra-high-speed performance among the best in the world.

Vacuum valve responsiveness, lifespan, and reliability have become standard requirements in manufacturing plants. Manufacturing valves with so many advantages requires advanced technology, but MAC has not overlooked the importance of price.

37A-AD0-HDAA-1BA 611B-12-501BA

37A-AD0-HDAA-1MA 611B-12-611JB

37A-ADO-HDAO-1KJ 611B-12-611JM

37A-ADO-HDBA-1BA 612B-11-111BA

37A-ADO-HDFA-1BA 613B-11-111CA

37A-BCO-HDAA-1BA 613B-11-221BA

The company primarily deals in European and American brands, and can source brands from any European country. For example, key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, HIRSCHMANN industrial switches, Henschler, MURR, SCHMERSAL, SAMSON, and EPRO (a subsidiary of Emerson). American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi