HYDAC pressure sensor HDA4745-A-016-000 (Germany) in stock
$405.01
To determine the numbering and specific installation location of the pressure sensors, the German HYDAC pressure sensors need to be considered according to each inflation section of the inflation network. (1) The pressure sensors must be installed along the cable, preferably at the cable joint. (2) Each cable should have no fewer than 4 pressure sensors installed, and the two pressure sensors closest to the telephone exchange should not be more than 200m apart. (3) One pressure sensor should be installed at the beginning and one at the end of each cable.
Brand
HYDAC/Germany
Application Areas
Chemical, Petroleum, Energy, Electrical, General
HYDAC Pressure Sensor Performance Parameters (Germany):
HYDAC offers a wide variety of pressure sensors with varying performance characteristics. Choosing the right sensor for your needs is crucial for cost-effectiveness and efficiency.
1. Rated Pressure Range
The rated pressure range is the pressure range that meets the standard specifications. In other words, it's the pressure range between the highest and lowest pressures where the sensor outputs its specified operating characteristics. In practical applications, the pressure measured by the sensor falls within this range. Currently, sensors can measure pressures up to 300 MPa or higher.
2. Maximum Pressure Range
The maximum pressure range refers to the maximum pressure the sensor can withstand for an extended period without altering its output characteristics. Semiconductor pressure sensors, in particular, typically have significantly reduced rated pressure ranges to improve linearity and temperature characteristics. Therefore, they can withstand continuous use above the rated pressure without damage. Generally, the maximum pressure is 2-3 times the highest rated pressure.
3. Damage Pressure
Damage pressure is the maximum pressure that can be machined onto the sensor without damaging the sensor element or housing.
4. Linearity
Linearity refers to the maximum deviation from the linear relationship between the sensor output and the pressure within the operating pressure range.
5. Pressure Hysteresis
Pressure hysteresis is the difference in sensor output as the sensor approaches a certain pressure from the minimum and maximum operating pressures at room temperature and within the operating pressure range.
6. Temperature Range
The temperature range of a pressure sensor is divided into the compensated temperature range and the operating temperature range. The compensated temperature range is the temperature range within which accuracy falls within the rated range after temperature compensation is applied. The operating temperature range is the temperature range within which the pressure sensor can operate normally.
The German HYDAC pressure sensor is one of the most commonly used sensors in industrial practice. It is widely used in various industrial automation environments, including water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military, petrochemicals, oil wells, power, shipbuilding, machine tools, pipelines, and many other industries. Below is a brief introduction to the principles and applications of some commonly used sensors. Also available are medical pressure sensors.
HYDAC Pressure Sensors (Germany)
HYDAC products have a wide range of applications, covering almost all industries, especially in metallurgy, automotive, power equipment, chemical, construction machinery, papermaking, shipbuilding, and machine tool manufacturing. HYDAC has branches or subsidiaries in more than 30 countries and regions, with manufacturing bases in the United States, France, India, the United Kingdom, Switzerland, Italy, and China, employing over 5,000 people.
HYDAC's main products:
HYDAC Technology GmbH's product range mainly includes the following:
Accumulator technology: Bladder accumulators, piston accumulators, diaphragm accumulators, various vibration dampers, etc.
Fluid filtration technology: Various hydraulic and lubrication filters, oil filter carts, vacuum dehydration carts, oil quality testers.
Process technology: Special media filters, automatic backwashing filters.
Electronic measurement technology: Pressure, temperature, and flow detection switches, sensors and displays, fault diagnostic instruments, etc.
Cooling Technology: Oil/air coolers, water coolers, various cooling devices, oil supply pumps.
Hydraulic Control Technology: Hydraulic directional, pressure, and flow control valves, proportional valves, ball valves.
Hydraulic and Lubrication System Assemblies: Hydraulic lubrication power units for various applications, control valve blocks, hydraulic actuators.
Pipeline Installation Technology: Ball valves, pipe clamps, flanges, pipe fittings, hose assemblies, quick couplings.
Other: Pressure gauges, pressure gauge switches, pressure testing hoses, pressure testing connectors, level gauges, air filters, bell jars, etc.
HYDAC Sensors (Germany) in Stock in Shanghai:
HDA 3844-A-016-000 905493 hydac
HDA 3844-A-060-000 905494 hydac
HDA 3845-A-400-000 905498 hydac
HDA 3845-A-600-000 905565 hydac
HDA 3844-A-100-000 905568 hydac
HDA 3845-B-400-000 905596 hydac
HDA 3845-B-600-000 905636 hydac
HDA 3844-A-250-000 905638 hydac
HDA 3845-B-016-000 905768 hydac
HDA 3845-A-060-000 905773 hydac
HDA 3844-B-400-000 905776 hydac
HDA 3845-B-100-000 905789 hydac
HDA 3845-E-400-000 905804 hydac
HDA 3845-A-006-000 905828 hydac
HDA 3844-A-400-000 905852 hydac
HDA 3844-B-250-000 905893 hydac
HDA 3844-B-060-000 905920 hydac
HDA 3845-B-006-000 906144 hydac
HDA 4445-A-400-000 906209 hydac
HDA 3844-E-006-000 906266 hydac
HDA 3844-E-016-000 906267 hydac
HDA 3844-E-060-000 906268 hydac
HDA 3844-E-250-000 906269 hydac
HDA 3844-E-400-000 906270 hydac
HDA 3844-E-600-000 906271 hydac
HDA 4444-A-016-000 906297 hydac
HDA 4744-A-016-000 906298 hydac
HDA 4745-A-250-000 906392 hydac
HDA 4745-B-400-000 906507 hydac
HDA 4744-A-400-000 906604 hydac
HDA 3845-B-040-000 906623 hydac
HDA 4445-B-400-000 906839 hydac 2130
HDA 3845-E-250-000 906844 hydac 4397
HDA 4744-A-160-000 906911 hydac 3170
HDA 4444-B-600-000 906933 hydac 2218
HDA 4445-A-250-000 906995 hydac 2130
HDA 4445-B-100-000 907006 hydac 2130
HDA 4745-A-016-000 907278 hydac 2993
HDA 4444-B-060-000 907294 hydac 2218
HDA 4444-B-100-000 907295 hydac 2218
HDA 4444-B-250-000 907296 hydac 2218
HDA 4444-B-400-000 907297 hydac 2218 The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)
American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, Vickers, Helón (Norgren)
Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi
