- Estimated Lead Time : In stock. Usually ships in 7-10 working days.
- Manufacturer : Mitsubishi Electric
- GT2710-STBD
- GT 2710 - STBD
- category : GOT body
- series : GOT 2000
- Classification : Large size: 8 to 15 type
- Product model name : GT 2710 - STBD
- Model name : GT 27
- Conforming standard : UL / cUL, CE (EMC), CE (RoHS), KC, ABS, BV, DNV GL, LR, NK, RINA
- Display unit type : TFT color liquid crystal
- Screen size : 10.4 type
- resolution : SVGA: 800 X 600 [dot]
- Display size : 211.2 (W) x 158.4 (H) [mm]
- Number of display characters : 16 dot Standard font: 50 characters x 37 lines (full-width) 12 dots In standard font: 66 characters x 50 lines (full-width)
- Display color : 65536 colors
- Brightness adjustment : 32 step adjustment
- Maximum number of images that can be registered : 4096 screen
- Backlight type : LED (can not be replaced)
- lifespan : About 60,000 hours (time at which the display luminance becomes 50% at an ambient temperature of 25 _ C.)
- color : White
- Touch panel method : Analog resistor type
- Key size : Minimum 2 X 2 [dots] (per one key)
- Number of simultaneous press points : Up to 2 points
- lifespan : 1 million times or more (operation force 0.98 N or less)
- Human sensor Detection distance : -
- Detected temperature : -
- User memory Memory capacity : Storage memory (ROM): 57 MB Operating memory (RAM): 128 MB
- Lifetime (number of writes) : 100 thousand times
- Internal clock accuracy : _ 90 seconds / month (ambient temperature 25 _ C)
- Battery type : GT 11 - 50 BAT type lithium battery
- Backup target : SRAM data, clock data, system status log data
- lifespan : About 5 years (ambient temperature 25 __)
- Internal interface bus : -
- RS-422/485 (shared) : 1 ch Transmission speed: 115200/57600/38400/19200/9600/4800 bps Connector shape: D sub 9 pins (female)
- RS-422/232 (shared) : -
- RS-422 : -
- RS-232 : 1 ch Transmission speed: 115200/57600/38400/19200/9600/4800 bps Connector shape: D sub 9 pins (male)
- Ethernet : 1 ch data transfer method: 100 BASE - TX / 10 BASE - T connector shape: RJ - 45 (modular jack)
- RGB : -
- Printer : -
- USB (device) : Maximum transfer rate: High-Speed ??480 Mbps 1 ch (Front) Connector shape: USB Mini-B
- USB (host) : Maximum transfer speed: High-Speed ??480 Mbps 2 ch (front / rear) Connector shape: USB-A
- SD memory card : 1ch SDHC compatible (up to 32GB)
- CF card : -
- PC card slot : -
- Option function board : -
- Memory board : -
- Extended interface : For installing communication unit / option unit
- Extended auxiliary interface : 1ch for mounting option unit
- Side interface : For installing communication unit
- Wireless LAN communication unit interface : -
- Audio output interface : -
- switch Switch 1 : -
- Switch 2 : -
- Buzzer output : Single tone (pitch and tone length adjustable)
- POWER LED : Luminescent color: 2 colors (blue, orange)
- Protective structure : Front portion: IP 67 F Panel inside: IP 2 X
- External dimensions : 303 (W) x 218 (H) x 52 (D) [mm]
- Panel cut dimensions : 289 (W) x 200 (H) [mm]
- Mass (excluding mounting hardware) : 2.1 [Kg]
- Operating ambient temperature : 0 to 55 _ C
- Storage ambient temperature : -20 _ C to 60 _ C
- Ambient operating humidity : 10 to 90% RH, non condensing
- Storage ambient humidity : 10 to 90% RH, non condensing
- Anti-vibration Compliance standard : Meets JIS B 3502, IEC 61131-2
- When there is intermittent vibration :Partial amplitude 3.5 mm, Number of sweeps X, Y, Z 10 times in each directionAcceleration 9.8 m / s 2 , Number of sweeps X, Y,
- When there is continuous vibration :Single amplitude 1.75 mmAcceleration 4.9 m / s 2
- Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 (15 G) 3 times in X, Y, Z direction each)
- Use atmosphere : There is no oil smoke, corrosive gas, flammable gas, conductive dust is not serious, it is not exposed to direct sunlight (also during storage)
- Use elevation : 2000 m or less
- Installation location : In the control panel
- Over Voltage category : II or less
- Pollution degree : 2 or less
- cooling method : Self-cooling
- Input supply voltage : DC 24 V (+ 25%, - 20%)
- Input frequency : -
- Input maximum apparent power : -
- power consumption At maximum load : 42 W or less
- Main unit body : 15 W
- Main unit (when backlight is off) : 8 W
- Inrush current : 5 A or less (20 ms, ambient temperature 25 _ C., maximum load)
- Allowable momentary power failure time : Within 10 ms
- Noise tolerance : Noise voltage with 500 Vp-p, noise width 1 濞揰, noise frequency of 25 to 60 Hz by noise si
- tor
- Withstand voltage : Power supply terminal all together ? earth ground AC 350V 1 minute
- Insulation resistance : Power supply terminal all together ? ground DC 500 V at insulation resistance meter 10 M_ or more
- Applicable wire size : 0.75 to 2 [mm 2 ]
- Applicable crimp terminal : Crimp terminals for M3 screw RAV1.25-3, V2 - S3.3, V2 - N3A, FV2 - N3A
- Applicable tightening torque (terminal block terminal screw) : 0.5 to 0.8 [N . m]
- ground : Class D grounding (type 3 grounding), connecting to the board when grounding is impossible
- Mounting type : standard
- Shipping Weight : 3 Kg
Distributor of Industrial Automation Parts
One Stop Sourcing and Supply
Fast delivery, reliable combined shipping
20 years of experience
Leading industry innovation
Flexible Payment
Pay in 20+ local currencies
Ship worldwide via DHL, FedEx, UPS & more

September 1, 2025
Item Number:GT2710-STBD
Category: Mitsubishi
Price: $1677.06 USD / €1526.12 EUR
Mitsubishi Electric GT 2710 - STBD
Details
Related Items
September 23, 2025
294Transistor Block: PM100RRS060

September 23, 2025
273Universal model QCPU Q10UDEHCPU

September 23, 2025
293Redundant PLC CPU Module: Q12PRHCPU

September 23, 2025
299Universal model QCPU Q13UDHCPU
