German GSR solenoid valve A5246/1002/.032 220/50 in stock.
$369.39
The German GSR solenoid valve contains a sealed chamber with through-holes at different locations, each connecting to a different oil pipe. Inside the chamber is a piston, flanked by two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side. Controlling the movement of the valve body opens or closes different drain holes. The inlet hole is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the flow of current to the electromagnets controls the mechanical movement.
Brand
GSR/Germany
Flow Direction
Other
3C Valve Category
Industry
Application Areas
Environmental Protection, Food/Agricultural Products, Agriculture, Forestry, Animal Husbandry and Fishery, Pharmaceuticals/Biopharmaceuticals, Comprehensive
German GSR Solenoid Valve A5246/1002/.032 220/50 in Stock
GSR Pneumatic Control Valve, GSR Control Valve, GSR Pneumatic Control Valve, GSR Three-Way Electric Control Valve, GSR Self-Operated Control Valve, GSR Pneumatic Valve, GSR Electric Valve, GSR Controller - Discounted Supply of German GSR Electric Valves, GSR Solenoid Valve, GSR Pneumatic Control Valve, GSR Control Valve, GSR Pneumatic Control Valve, GSR Three-Way Electric Control Valve, GSR Self-Operated Control Valve, GSR Pneumatic Valve
Because GSR possesses core products from modern machinery, it can create any product its customers desire. Of course, GSR can also manufacture some standard high-quality valves in a short time.
All production processes at the German company GSR comply with DIN EN ISO 9001 standards, and the company continuously manages and improves its production standards within its own quality management system.
Founded in 1971, GSR is part of the Indus Holding AG Group. Since its inception, GSR has been dedicated to the development, research, and sales of valves and accessories, covering almost all application areas. In addition to over 2,000 standard products, it also provides solenoid valves, pneumatic valves, and electric valves for high temperatures (350°C), high pressures (350 bar), and large diameters (DN400). Furthermore, it designs electric valves with special specifications according to customer requirements.
GSR's strength lies in manufacturing customized valves to meet customer needs and collaborating with customers to develop various solutions and train engineers. Its core competitiveness lies in quickly providing customized valve solutions for various application areas. Over the past 35 years, GSR engineers have manufactured over 3,000 specialized valves, these reliable valves incorporating various technologies and effectively installed in diverse environments.
Selection Criteria for German GSR Solenoid Valves:
The selection of German GSR solenoid valves should first follow four principles in order: safety, reliability, applicability, and economy. Secondly, it should be based on six aspects of the on-site operating conditions (i.e., pipeline parameters, fluid parameters, pressure parameters, electrical parameters, actuation method, and special requirements).
Selection Criteria for German GSR Solenoid Valves:
1. Selecting the solenoid valve based on pipeline parameters: nominal diameter (DN) and connection type
1) Determine the nominal diameter (DN) based on the on-site pipeline inner diameter or flow requirement;
2) For the connection type, generally, >DN50 requires a flange connection, while ≤DN50 can be freely selected according to user needs.
2. Selecting Solenoid Valves Based on Fluid Parameters: Material and Temperature Group
1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel valves are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.
2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves are preferred.
3) Fluid state: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN25, these must be clearly distinguished.
4) Fluid viscosity: Generally, any viscosity can be selected below 50 cSt. If it exceeds this value, a high-viscosity solenoid valve should be selected.
3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structural Types
1) Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined by the nominal pressure of the pipeline.
2) Working pressure: If the working pressure is low, a direct-acting or step-direct-acting principle valve must be selected; when the minimum working pressure difference is above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected. 4. Electrical Selection: AC220V or DC24V voltage specifications are preferred for ease of use.
5. Selection Based on Continuous Operating Time: Normally Closed, Normally Open, or Continuously Powered
1) When the solenoid valve needs to be open for a long time, and the duration is longer than the closing time, a normally open type should be selected.
2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected.
3) However, for some safety protection applications, such as furnace and kiln flame monitoring, a normally open type cannot be selected; a continuously powered type should be chosen.
6. Selection of Auxiliary Functions Based on Environmental Requirements: Explosion-proof, Check Valve, Manual Operation, Water-resistant Fog, Water Spray, Submersible.
Solenoid Valve D4023/0801/.032 24VDC
Solenoid Valve D4023/0801/.032-AS 220/50
Solenoid Valve D4023/1001/.032 24VDC
Solenoid Valve D4023/1001/.118 220/50
Solenoid Valve D4023/1001/.148-NO 24VDC
Solenoid Valve D4024/1001/.032 24VDC
Solenoid Valve D4024/1001/.182 220/50
Solenoid Valve D4024/1001/.182 24VDC
Solenoid Valve D4025/0801/.032 220/50
Solenoid Valve D4025/0802/.148-FL 24VDC
Solenoid Valve D4025/1001/.032 24VDC
Solenoid Valve D4025/1001/.182 220/50
Solenoid Valve D4025/1001/.182 24VDC
Solenoid Valve D4025/1002/.032 220/50
Solenoid Valve D4025/1002/.032 24VDC
Solenoid Valve D4025/1006/T012-TM 220/50
Solenoid Valve B4026/1001/.032 220/50
Solenoid Valve B4027/1001/.032 220/50
Solenoid valve B4027/1006/.032 220/50
Solenoid valve B4028/1001/.032 220/50
Solenoid valve B4028/1001/.032 24VDC
Solenoid valve B4028/1002/.032 220/50
Solenoid valve D4322/1001/.012 24VDC
Solenoid valve D4323/1001/.012 220/50
Solenoid valve E4323/1001/.032 220/50
Solenoid valve A5240/1002/.032 220/50
Solenoid valve A5240/1002/.032 24VDC
Solenoid valve A5240/1002/.032FL 24VDC
Solenoid valve A5240/1002/.148 24VDC
Solenoid valve A5240/1004/.032 220/50
Solenoid valve A5240/1004/.032 DC24V
Solenoid valve A5240/1006/.032 220/50
Solenoid valve A52411/060/.247 220/50
Solenoid valve A5242/1002/.012 220/50
Solenoid valve A5242/1002/.012 220VDC
Solenoid valve A5242/1002/.012 24VDC
Solenoid valve A5242/1002/.032 220/50
Solenoid Valve A5242/1002/.182 24VDC
Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)
American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS
British brands: Norgren
Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi
