Newsino Energy Company

Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
Ethernet interface block FX3U-ENET-ADP
Transmission Specifications Data transmission speed: 100Mbps or 10Mbps,
Communication mode: Full / half duplex
Transmission method: Baseband
The maximum segment length: 100m
The maximum number of nodes / connection: 10BASE-T: cascade up to four stages_
100BASE-TX: cascade up to two-stage_
above is the connection possible number of stages at the time of use repeater hub._
Can be connected to the number of stages at the time of switching hub used, please check with the manufacturer of the switching hub to be used.
Connector: RJ45
function: 鐠 MELSOFT connection_
communicate by 鐠 MC protocol_
direct connection with 鐠 MELSOFT (simple connection)_
and connection CPU search function__nd time setting function_
? time setting function (SNTP client), executable only after the establishment of the trigger conditions_
diagnosis from 鐠 MELSOFT function_
data monitoring function
Number of connections: MELSOFT connection + MC protocol + data monitoring ? 4 connection
It can be connected to the number of the basic unit: One_
Ethernet adapter, as well as the communication function expansion board and other communication special adapter, and 1 channel the communication channel (CH) occupation.
Apply PLC: FX3S, FX3G (V2.00 or later), FX3U (since V3.10), FX3GC (V2.00 or later), FX3UC (V3.10 or later)_
connection to the FX3S is required FX3S-CNV-ADP._
Connection to the FX3G is required FX3G-CNV-ADP._
FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board.
mass: 0.1kg
Power Specifications: _
Power supply: 30mA / DC5V (internal power supply from DC5V power of the basic unit)
Allowable momentary power failure time: As well as the sequencer to be connected
Ambient temperature: 0 ~ 55 __ 鐠虹熅鐠虹熅鐠 operation, -25 ~ 75 __ 鐠虹熅鐠虹熅鐠 during storage
Relative humidity: 5 ~ 95% RH (non-condensing) ...... operation
Vibration resistance When the DIN rail mounting Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
Direct mounting at the time Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
Impact resistance: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each
Anti-noise: Noise voltage 1,000Vp-p, noise width 1濞揰, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator
Withstand voltage: All terminals and between the ground terminal: AC500V 1 minute
Insulation resistance: All terminals and between the ground terminal: DC500V 5M_ more in insulation resistance tester
Working environment: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly
Use advanced: 2000m or less_
can not be used in the pressurized environment to more than atmospheric pressure.__here is a possibility of failure.
Shipping Weight : 1 Kg

Item Number:FX3U-ENET-ADP

Details

Related Items

pm100rrs060

q10udehcpu

q12prhcpu

q13udhcpu