Estimated Lead Time: 5-7 Working Days

Manufacturer: Mitsubishi Electric

FX3U-485ADP

FX3U-485ADP-MB FX3U-485ADP-MB

Transmission standard: RS-485 standard, conform to the RS-422 standard

Insulation method:Photocoupler

Transmission distance: The total length 500m or less_
(to the equipment to be connected FX2N-485-BD, FX1N- 485-BD, FX3U-485-BD,__ollowing the total length 50m if it contains a FX3G-485-BD)

External device connection method: Europe terminal block

Communication system: Half-duplex bi-directional

Communication procedure: . MODBUS (master or slave)_- No-protocol communication, computer link (dedicated protocol format 1, dedicated protocol format 4), parallel link__nd simple PC-to-PC link inverter communication

communication speed MODBUS communication: 300/600/1200/2400/4800/9600/19200/38400/57600/115200 (bps)_
corresponds to 38400/57600 / 115200bps from products manufactured on or after July 2012._(Serial number: 127 **** or later)

No-protocol, the computer link: 300/600/1200/2400/4800/9600/19200/38400 (Bps)_
FX3U, FX3UC is, later Ver.2.41, it supports 38400bps.

Parallel link: 115200 (bps)

Simple PC-to-PC link: 38400 (bps)

Inverter communication: 4800/9600/19200/38400 (Bps)_
FX3U, FX3UC is, later Ver.2.41, it supports 38400bps.

Display (LED): RD, SD, POWER

O occupied points: 0 points (no relation to the maximum input and output points of the sequencer)

Apply sequencer: [FX3S]_
V1.00 and later: corresponding to all the communication function_

[FX3G]_
V1.00 and later: MODBUS, corresponding to the communication functions other than the inverter communication_
V1.10 and later: inverter communication function to the corresponding_
V1.30 and later: in MODBUS communication function correspondence_

[FX3U]_
V2.20 and later: communication functions other than the MODBUS communication to the corresponding_
V2.40 and later: corresponds to the MODBUS communication function_

[FX3GC]_
V1.40 and later: corresponding to all the communication function_

[FX3UC]_
V1.00 and later: MODBUS communication communication function to the corresponding non-_
V2.40 and later: corresponds to the MODBUS communication function.

connection to FX3S is required FX3S-CNV-ADP._

Connection to the FX3G is required FX3G-CNV-ADP._

FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board.

mass: 0.08kg

Power Specifications:

Power supply: DC5V 20mA (internal power supply from the sequencer)

Ambient temperature: 0 ~ 55 __ ..... operation, -25 ~ 75 __ ..... during storage

Relative humidity: 5 ~ 95% RH (non-condensing) ...... operation

Vibration resistance When the DIN rail mounting : Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)

When the DIN rail mounting : Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)

Direct mounting at the time : Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)

Direct mounting at the time : Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)

Impact: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each

Anti-noise: Noise voltage 1,000Vp-p, noise width 1濞揰, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator

Withstand voltage: External terminals and between the PLC main unit of the ground terminal: AC500V 1 minute

Insulation resistance: External terminals and between the PLC main unit of the ground terminal: DC500V 5M_ more in insulation resistance tester

Use atmosphere: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly

Advanced use: 2000m or less__an not be used in the pressurized environment to more than atmospheric pressure._

There is a possibility of failure.

Shipping Weight : 1 Kg