Newsino Energy Company

Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
FX2N-10PG
Pulse output block FX 2 N - 10 PG
Number of control axes : Independent single axis
Pulse output method : Differential line driver system
Pulse output form : Pulse train + direction, forward rotation / reverse rotation pulse train
Maximum frequency : 1 MHz
Acceleration / deceleration processing : Automatic trapezoidal acceleration / deceleration, approximate S-shaped acceleration / deceleration
Control unit : pulse, 濞揰, 10 -4 inch, mdeg
Positioning range : -2, 147, 483, 648 to +2, 147, 483, 647 pulse -2, 147, 483, 648 to +2, 147, 483, 647 [X (position data magnification) 濞揰] -2, 147, 483, 648 to +2, 147, 483, 647 [X (position data magnification) X 10 -4 inch] -2, 147, 483, 648 to +2, 147, 483, 647 [X (position data magnification) mdeg] The position data magnification can be set to X 1, X 10, X 10 2, or X 10 3 in the parameter. It can be set in the range of -2, 147, 483, 648 to +2, 147, 483, 647 in terms of pulse conversion value.
Programming language : BFM can be specified directly by sequence program (FROM / TO instruction, application instruction operand)
Position data : 1 point (set with sequence program) 200 point (table) can be set when table positioning operation is performed.
Manual pulsar connection : Connectable (differential line driver, open collector)
Absolute position detection (ABS current value reading) : Use sequencer's ABS command
Number of occupied I / O points : Sequencer input / output 8 points occupation (It can count either input or output)
Application sequencer : FX2N, FX3U, FX2NC, FX3UCFX2NC - CNV - IF is required for connection to FX2NC. To connect to FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required.
mass : 0.2 Kg
Power-supply voltage : DC 5 V 120 mA (Internal power supply from PLC)
Input specification :
Control input : Control input: 3 points (START, DOG, PG 0) Interrupt input: 2 points (X0, X1) 2 phase pulser input: 1 point (__, __)
Input signal voltage START, DOG, X0, X1 : DC 24 V _ 10%
_ A, _ B : DC 3.0 V to 5.5 V
PG 0 : DC 3.0 V to 5.5 V
Input signal format START, DOG, X0, X1 : Contact or open collector transistor
_ A, _ B : Differential line driver or open collector transistor
PG 0 : Differential line driver or open collector transistor
Input signal current START, DOG, X0, X1 : 6.5 mA _ 1 mA
_ A, _ B : 6 mA to 20 mA
PG 0 : 6 mA to 20 mA
Input ON sensitivity START, DOG, X0, X1 : 4.5 mA or more
_ A, _ B : 6 mA or more
PG 0 : 6 mA or more
Input OFF sensitivity START, DOG, X0, X1 : 1.5 mA or less
_ A, _ B : 1 mA or less
PG 0 : 1 mA or less
Input capture speed START, DOG, X0, X1 : 0.1 ms or less (DOG is 1.0 ms or less)
_ A, _ B : 2 phase pulse 30 kHz or less (Duty 50%)
PG 0 : Pulse width 50 濞揰 or more
Circuit insulation : Photocoupler insulation
Input operation display : LED ON when input is ON
Number of output points : 3 points (FP, RP, CLR)
Output form Pulse output unit (FP / RP) : You can select forward rotation (FP) / reverse rotation (RP) or pulse (PLS) / direction (DIR).
Clear signal (CLR) : It turns ON when homing operation is completed. (Output pulse width: 20 ms)
Output method Pulse output unit (FP / RP) : Differential line driver output
Clear signal (CLR) : NPN open collector transistor output
Rated load voltage Pulse output unit (FP / RP) : DC 5 V to 24 V (power supplied from the VIN terminal)
Clear signal (CLR) : DC 5V to 24V
Maximum load current Pulse output unit (FP / RP) : 25 mA or less
Clear signal (CLR) : 20 mA or less
VIN consumption current Pulse output unit (FP / RP) : At 24 VDC: 70 mA at 5 VDC : 100 mA
Maximum voltage drop during ON Clear signal (CLR) : 1.5V or less
Leakage current when OFF Clear signal (CLR) : 0.1 mA or less
Output frequency : 1 MHz
Output operation indication : LED on when output is ON
Ambient temperature : 0 to 55 _ C. ... Operating, -25 to 75 _ C. ..... Save
Relative humidity : 5 to 95% RH (noncondensing).... in operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)
Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)
Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)
Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 濞揰, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
Withstand voltage : Between external terminals and ground terminal of PLC main unit: AC 500 V for 1 minute
Insulation resistance : Between the external terminals collectively and the ground terminal of the programmable controller main body: 500 MV DC insulation resistance meter 5 M_ or more
Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.
Shipping Weight : 1.2 Kg

Item Number:FX2N-10PG

Details

Related Items

pm100rrs060

q10udehcpu

q12prhcpu

q13udhcpu