Eltra encoder EL40A1000Z5/28P6X3PR.1 in stock

Brand

ELTRA/Italy

Origin Category

Imported

Application Areas

Energy, Electronics/Batteries, Road/Rail/Marine, Automotive & Parts, General

Eltra encoders from Italy generate electrical signals that are processed by CNC (Computer Numerical Control) systems, PLCs (Programmable Logic Controllers), and control systems. These sensors are mainly used in machine tools, material processing, motor feedback systems, and measurement and control equipment.

In ELTRA encoders, angular displacement conversion utilizes the photoelectric scanning principle. The reading system is based on the rotation of a radial indexing disk, which consists of alternating transparent and opaque windows. The entire system is illuminated vertically by an infrared light source, projecting the image on the disk onto the surface of a receiver covered with a grating called a collimator, which has the same window as the optical disc. The receiver's function is to sense the light changes caused by the disk's rotation and convert these changes into corresponding electrical changes. Generally, rotary encoders also generate a speed signal, which is fed back to the frequency converter to adjust its output data.

Eltra Encoder

Fault Symptoms:

1. When the rotary encoder fails (no output), the frequency converter cannot work properly, running very slowly. After a while, the frequency converter will activate its protection mode, displaying "PG disconnected"... Only a combined action will work. To raise the electrical signal to a higher level and generate a square wave pulse without any interference, electronic circuitry is required. The wiring and parameters of the encoder PG must correspond to the encoder PG model. Generally, encoder PG models are divided into three types: differential output, open collector output, and push-pull output. The signal transmission method must take into account the inverter PG card interface; therefore, selecting the appropriate PG card model or setting it correctly is crucial.

ELTRA Incremental Encoder, ELTRA Rotary Encoder, ELTRA Wire-type and Magnetic Encoder, ELTRA Intrinsically Safe Explosion-proof Encoder. Advantages and Disadvantages of Eltra Encoders:

Eltra Encoders

Advantages:

Small size, high precision, high inherent resolution, non-contact and wear-free; the same model can detect both angular displacement and linear displacement with the assistance of a mechanical conversion device; multi-turn photoelectric absolute encoders can detect linear displacement over a considerable range (e.g., 25-bit multi-turn). Long lifespan, flexible installation, rich interface options, and reasonable price. Mature technology, widely used domestically and internationally for many years.

Eltra Encoders

Disadvantages: Precision but requires higher protection in outdoor and harsh environments; linear displacement measurement relies on mechanical conversion, necessitating the elimination of errors caused by mechanical backlash; difficulty in overcoming slippage when detecting objects moving on tracks.

Eltra

Static Magnet Encoder

Eltra Encoder

Advantages: Moderate size, direct measurement of linear displacement, absolute digital encoding, theoretically unlimited range; non-contact and wear-free, resistant to harsh environments, usable underwater up to 1000 meters; diverse interface options, various measurement methods; acceptable price.

Disadvantages: Low resolution (1mm); different models are required for measuring straight lines and angles; not suitable for displacement detection in minute areas (greater than 260mm).

EL120P2048Z8/24L30X3PR.2

EL120P2048Z8/24L50X3PR

EL30E20S8/24P4X3PA0.2+C

EL38F1000Z8/28P8X6PR

EL38F1024Z5/28P8X6PR.8000

EL38F30Z8/24L8X6PR2

EL38G1024Z5/28P10X3PR.1

EL40A1000S5/28P6S6PR

EL40A1000S5/28P6X6PR

EL40A1000Z5/28P6X3PR

EL40A1000Z5/28P6X3PR.1 EL40A1000Z5L6X6PA

EL40A100S5/28P6X6PR249

EL40A100S8/24P6X3PR5.774

EL40A100S8/24P6X6PR

EL40A100Z5/28P6X3PR

EL40A100Z5/28P6X6PR

EL40A1024S5/28P6X6PR2

EL40A1024Z5/28P6S3PR.956

EL40A1024Z5L6X6PR2

EL40A1200S5/28PC6X6PR

EL40A1200Z5/28N6X6PR2

EL40A1200Z5/28P6X6PR2 EL40A150S5/28P6X6PR249

EL40A150S5/28PB6X6PR.249

EL40A2000Z5/28P6S6PR2

EL40A2000Z5/28P6X3PR

EL40A200S5/28P6X6PR249

Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi