BAUMER encoder GBMMS.0205P32 in stock

Brand

BAUMER/Swiss Baumer

Origin Category

Imported

Application Fields

Chemical, Petroleum, Mining, Road/Rail/Shipping, Comprehensive

BAUMER encoders are devices that encode signals (such as bitstreams) or data, converting them into a signal form that can be used for communication, transmission, and storage. Encoders convert angular or linear displacement into electrical signals; the former is called a code disk, and the latter a code scale. According to the readout method, encoders can be divided into contact and non-contact types; according to the working principle, encoders can be divided into incremental and absolute types. Incremental encoders convert displacement into periodic electrical signals, and then convert these electrical signals into counting pulses, using the number of pulses to represent the magnitude of the displacement. Each position of an absolute encoder corresponds to a specific digital code; therefore, its reading depends only on the starting and ending positions of the measurement, and is independent of the intermediate process.

Common BAUMER encoder faults:

1. BAUMER encoder itself malfunction: This refers to a fault in the encoder's components,

causing it to fail to generate and output the correct waveform. In this case, the encoder needs to be replaced or its internal components repaired.

2. BAUMER encoder connection cable fault: This is the most common fault encountered during maintenance and should be the first thing to consider. It is usually caused by an open circuit, short circuit, or poor contact in the encoder cable. In this case, the cable or connector needs to be replaced. Special attention should also be paid to whether the cable is loosely secured, causing a break in the solder joint or an open circuit; in this case, the cable needs to be tightened.

3. Encoder +5V power supply drop: This refers to a +5V power supply that is too low. It should generally not be lower than 4.75V. The cause of a low voltage is a power supply fault or excessive resistance in the power transmission cable, leading to power loss. In this case, the power supply needs to be repaired or the cable replaced.

4. BAUMER absolute encoder battery voltage drop: This fault usually has a clear alarm message.

In this case, the battery needs to be replaced. If the reference point position memory is lost, a re-reference point operation must be performed.

5. BAUMER encoder cable shield wire not connected or detached: This will introduce interference signals, making the waveform unstable and affecting the accuracy of communication. The shield wire must be reliably soldered and grounded.

6. Loose BAUMER encoder installation: This fault will affect the position control accuracy, causing excessive position deviation during stopping and movement, and may even trigger a servo system overload alarm immediately upon power-on. Please pay special attention.

7. Grating contamination: This will reduce the signal output amplitude. Oil stains must be gently wiped away with a cotton ball soaked in grease. BAUMERGmbHFPDK-10P5101/S35A

BAUMERGmbHDLRU/509262D160Art.Cd.:153572

BAUMERGmbHBHF16.05A100/K555

BAUMERGmbHOPDM12P5101/S35A

BAUMERGmbHMVF63T66

BAUMERGmbHFVDM15P5103/S13

BAUMERGmbHMYCOMG75P/S35L

BAUMERGmbH8223-515

BAUMERGmbHIFFM2P17A3/S35L

BAUMERGmbHUNDK20P11/406006BN1+VSBK4BU3Z0V

WH2 BAUMERGmbHGOMMH.Z0210-30VDC5%RWProfibus-DP

V1.22

BAUMERGmbHG0MMH.Z02480332

BAUMERGmbHBPMD25G1P24P13/16KFD

BAUMERGmbHFHDK10P5101/S444

BAUMERGmbHGXMMH2203P3410-30VDC

BAUMERGmbHIFF08.26.35/L1/L

BAUMERGmbHIFFM-08P1703/O1KS35L

BAUMERGmbHPCD45.033PX01

BAUMERGmbHGI355.A70C329

BAUMERGmbHBFF1G.24K512-L2-5 BAUMERGmbHIFFM08N17A6/L

BAUMERGmbHDRO63/411.111

BAUMERGmbHTB80/212.157/20T

BAUMERGmbHIFFM20P1501/S351

BAUMERGmbHReflex-LichttasterPNP

10...30VDC/<200mA,IP67FHDM16P5001

rechtecig,Kabel,TW20-450mmFHDM16P5001

BAUMERGmbHBHF16.24K60-12-A

BAUMERGmbHBIM58GIP24P13/16KAD10164992

BAUMERGmbHFGDK35N1093/S BAUMERGmbH0-10MPA,0-100BAR,MEX100AG1/2,BH

BAUMERGmbH0-25BAR,G1/4

BAUMERGmbHG1/20+2500KPA

BAUMERGmbHGI355.070C349

BAUMERGmbH12p1702A485

BAUMERGmbHITD22A4Y812048MN/KR0.2.F14

BAUMERGmbHPT100CabelSensor.Cat.No.:8155-32-1000

1DINBsilicon.4-wiretemperaturerange:-50...+180

BAUMERGmbHATD-2B-B14-Y4-13/16-PB-PN-M16/12 BAUMERGmbHMSIA-53P2PR11-N52EP5025withreducer

casing

BAUMERGmbHMSIA-53P2PR11-N52CK0

BAUMERGmbHMSIA-68P2PR12-N64CK0

BAUMERGmbHFZAM-18P1155

BAUMERGmbH1FRM1701/S14L

BAUMERGmbHBaumer(CH-8501),MSIA68PBAF-N83/405171

BAUMERGmbHIFRM08P37A3/S35L

BAUMERGmbHZ1673P3229888340.10BUS-HAUBE

profibus-DPVL22

BAUMERGmbHGOMMH1203P3229783640.1010-30VDC 5%RWprofibus-DPV1.22

BAUMERGmbHFHDM16P5001/0500

BAUMERGmbHBaumersensor:IFRM12P1701/S35L

BAUMERGmbHBDK13.24K200/405295

BAUMERGmbHCH8501PHDK14P5101/S35A

BAUMERGmbHOADM20I4560/S14C131406

BAUMERGmbH5-36VDCIP67

BAUMERGmbHBFF1G24K512-L2-5

BAUMERGmbHBFF1G.24K512-L2-5

BAUMERGmbHBHK03.051000/400073CH8501 BAUMERGmbHMDFK08T7105/N16

BAUMERGmbHIFRM05P15A3/S05L

BAUMERGmbHIFFM06P15A3/01S05L

BAUMERGmbHCH-8501oadm20I4560/s14cwavelength：

630-680inspectdistance: 30-130mm

BAUMERGmbHBaumerGmbH

BAUMERGmbHIFR12.24.31A/S12/L

BAUMERGmbHIFRM12P1701/S35L

BAUMERGmbHIGYX18N17E3/L

BAUMERGmbHBE4230-A2056-H5-L4200-R201-S10-6BAR BAUMERGmbHMEX5/D31/E22/0-1.6MPaG1/2B,IP65

BAUMERGmbHMEX5/D31/E22/0-2.5MPaG1/2B,IP65

BAUMERGmbHMEX5/D31/E22/0-4.0MPaG1/2B,IP65

BAUMERGmbHMEX5/D31/E22/0-6.0MPaG1/2B,IP65

BAUMERGmbHMEX5/D30/E29/0-2.5MPaG1/2B316Ti,IP65

BAUMERGmbHMEX5/D30/E29/0-4.0MPaG1/2B316Ti,IP65 BAUMERGmbHMEX5/D30/E29/0-6.0MPaG1/2B316Ti,IP65

BAUMERGmbHMEX5/D30/E27/0-4.0MPaG1/2B316Ti,IP65

BAUMERGmbHMEX5/D30/E27/0-6.0MPaG1/2B316Ti,IP65

BAUMERGmbHIFRM08P13G1/S35L (open)

The Baumer Group is headquartered in Frauenfeld, Switzerland, and currently has approximately 2,500 employees worldwide, with 36 branches in 18 countries.

Baumer Electrical Co., Ltd. is a manufacturer of industrial automation sensors with 50 years of history. It has its own production facilities in the United States, Sweden, Germany, France, Italy, the United Kingdom, and Canada, and its products cover more than 110 countries worldwide. As a leader in precision sensor technology, Baumer has always been committed to the research and development of industrial automation and process control products, excelling in accuracy, reliability, stability, diversity, and effective demand.

Baumer China

Baumer China was established in Shanghai in September 2006 as a branch of the Baumer Group in China, and will also serve as the group's business center in North Asia (Mainland China, Hong Kong, Taiwan, Japan, and South Korea). We aim to provide the Chinese and North Asian markets with the full range of Baumer products.

Baumer China will bring its internationally recognized high-tech, high-precision sensing technology to the Chinese market, providing Chinese customers with reliable products, high-quality automation components, and high-precision automation systems. We will also tailor the best sensing solutions to meet the specific needs of the Chinese market. We have an experienced engineering and sales team, with industry expert advice in consulting, sales, and service. Baumer China will strictly implement the Group's global philosophy—"Customer-centric, Quality-focused, Striving for Excellence, and Pioneering Innovation"—and serve the Chinese market accordingly. In addition to our Shanghai headquarters, we have established sales offices in Beijing, Guangzhou, and Shenyang to be closer to our customers. In the future, we plan to establish more sales offices in other cities to expand our sales and service network to cover more areas of China, thereby ensuring the Baumer quality we bring to the Chinese market.

Baumer Electrical Co., Ltd. is a manufacturer of industrial automation sensors with 50 years of history. It has its own production facilities in the United States, Sweden, Germany, France, Italy, the United Kingdom, and Canada, and its products cover more than 110 countries worldwide. As a leader in precision sensor technology, Baumer has always been committed to the research and development of industrial automation and process control products, excelling in accuracy, reliability, stability, diversity, and effective demand.

Baumer China

Baumer China was established in Shanghai in September 2006 as a branch of the Baumer Group in China, and will also serve as the group's business center in North Asia (Mainland China, Hong Kong, Taiwan, Japan, and South Korea). We aim to provide the Chinese and North Asian markets with the full range of Baumer products.

Baumer China will bring its internationally recognized high-tech, high-precision sensing technology to the Chinese market, providing Chinese customers with reliable products, high-quality automation components, and high-precision automation systems. We will also tailor the best sensing solutions to meet the specific needs of the Chinese market. We have an experienced engineering and sales team, with industry expert advice in consulting, sales, and service. Baumer China will strictly implement the Group's global philosophy—"Customer-centric, Quality-focused, Striving for Excellence, and Pioneering Innovation"—and serve the Chinese market accordingly. In addition to our Shanghai headquarters, we have established sales offices in Beijing, Guangzhou, and Shenyang to be closer to our customers. In the future, we plan to establish more sales offices in other cities to expand our sales and service network to cover more areas of China, thereby ensuring the Baumer quality we bring to the Chinese market.

The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi