AVENTICS cylinder 0822034202 in stock

Brand

AVENTICS/Germany

Action Method

Other

Application Areas

Petroleum, Mining, Energy, Electrical, Integrated

AVENTICS Solenoid Valves, AVENTICS Pneumatic Components, AVENTICS, AVENTICS Offices

Germany AVENTICS Rotary Cylinder Models, AVENTICS Rotary Cylinders

Several operating modes suitable for different applications, easy to operate and maintain

Removable fan with LCD control panel (with copy function)

*The source filter for functions and high performance settings is set and started using PC software.

Continuous Rated Current 1) [A 1,3 2,5 4 5,5 10 13

Motor Rated Voltage Phase 0 V ... Main Power Supply Voltage

Germany AVENTICS Rotary Cylinder Models, AVENTICS Rotary Cylinders

■Mounting surface according to DIN 24340 Type A and ISO 4401

■RV-P pilot control valve closed-loop position control pilot control valve and master stage

■Controls the direction and magnitude of flow

■Closed-loop control for power, position, speed and position

■ Suitable for closed-loop control of power, position, speed, and pressure

Motor rated voltage: Three-phase, 0V... Main power supply voltage

■ Pilot control via a 3-way high-frequency response valve with position feedback

Output voltage: 0V; Power supply output frequency: 0...400Hz

Power supply voltage: 3AC 380...480V (-15% / +10%)

Frequency: 50...60Hz (±5%); Overload capacity: 200% In or 150% In (60s)

Rexroth/AVENTICS rotary cylinder

Ambient temperature: Minimum/Maximum +5°C / +60°C

Z Low/Z High Medium temperature: +5°C / +60°C

Medium: Compressed air

Particle size: max. 5 μm

Oil content in compressed air: 0 mg/m³ - 1 mg/m³

Theoretical torque: 6 bar

Material:

Aluminum housing Anodizing Treatment

Aluminum Cover Plate: Anodized aluminum, blackened

Aluminum Base Plate: Anodized aluminum, blackened

Sealing: Acrylic resin

Shaft Steel: Quenched

Swivel Flange Steel: The quenched pressure dew point must be at least 15 °C below the ambient and medium temperature, and the maximum permissible temperature is 3 °C.

■ The oil content of the compressed air must remain constant throughout its service life.

■ Only oils approved by Bosch Rexroth may be used; see the "Technical Information" section.

■ This product is a component of the EasyHandling system.

Rexroth/AVENTICS Rotary Cylinders

Maximum Permissible Axial Bearing Load [N] 170 280 330 490 620

Maximum Permissible Radial Bearing Load [N] 170 300 360 580 780

Maximum Permissible Moment of Inertia [kgcm²] 0.08 0.25 0.7 1.6 3.2

Repeatability [°] 0.2 0.2 0.2 0.2 0.2

Theoretical Torque [Nm] 0.17 0.33 0.95 1.7 3

Size RCM-25

Maximum Permissible Axial Bearing Load [N] 1160

Maximum Permissible Radial Bearing Load [N] 1480

Maximum Permissible Moment of Inertia [kgcm²] 6.3

Repeatability [°] 0.2

Theoretical Torque [Nm] 6.5

AVENTICS cylinders are pneumatic actuators that convert the pressure energy of compressed gas into mechanical energy in pneumatic transmission.

Cylinders are pneumatic actuators that convert the pressure energy of compressed gas into mechanical energy. There are two types of cylinders: those that perform reciprocating linear motion and those that perform reciprocating oscillating motion (see figure). Cylinders that perform reciprocating linear motion can be further divided into four types: single-acting cylinders, double-acting cylinders, diaphragm cylinders, and impact cylinders.

① Single-acting cylinder: Only one end has a piston rod. Air is supplied from one side of the piston to generate pressure, which pushes the piston to extend. It returns to its original position by a spring or its own weight.

② Double-acting cylinder: Air is supplied alternately from both sides of the piston, outputting force in one or two directions.

③ Diaphragm cylinder: A diaphragm replaces the piston, outputting force in only one direction and returning to its original position by a spring. It has good sealing performance but a short stroke.

④ Impact cylinder: This is a new type of component. It converts the pressure energy of compressed gas into the kinetic energy of the piston's high-speed (10~20 m/s) motion to perform work. ⑤ Rodless Cylinder: A general term for cylinders without a piston rod. There are two main categories: magnetic cylinders and cable cylinders.

A cylinder that performs a reciprocating oscillation is called an oscillating cylinder. A vane divides the internal cavity into two, and air is alternately supplied to the two cavities, causing the output shaft to oscillate. The oscillation angle is less than 280°. Other types include rotary cylinders, pneumatic-hydraulic damping cylinders, and stepping cylinders.

AVENTICS Cylinder Causes

Internal and external leakage in AVENTICS cylinders is generally caused by piston rod misalignment, insufficient lubrication, worn or damaged seals and sealing rings, impurities inside the cylinder, and scratches on the piston rod. Therefore, when internal and external leakage occurs, the piston rod center should be readjusted to ensure coaxiality between the piston rod and the cylinder barrel; the oil mist lubricator should be checked frequently to ensure proper lubrication of the actuator; worn or damaged seals and sealing rings should be replaced promptly; impurities inside the cylinder should be removed promptly; and scratches on the piston rod should be addressed by replacing it.

Insufficient output force and unstable operation of AVENTICS cylinders are generally caused by piston or piston rod jamming, poor lubrication, insufficient air supply, or the presence of condensate and impurities in the cylinder. To address this, the piston rod centering should be adjusted; the lubricator should be checked for reliable operation; and the air supply line should be checked for blockages. Condensate and impurities in the cylinder should be removed promptly.

Poor cylinder cushioning is generally caused by worn cushioning seals or damaged adjusting screws. In this case, the seals and adjusting screws should be replaced.

Damage to the piston rod and cylinder head of AVENTICS cylinders is generally caused by eccentric piston rod installation or a malfunctioning cushioning mechanism. To address this, the piston rod centering should be adjusted; the cushioning seals or adjusting screws should be replaced.

R431005156 LEVELING PIECE ROTAIR-7P-8S

R431005160 PLATE ROTAIR-P-INSTRUCTION

R431005161 COMPRESSION SPRING 0.045X0.255X0.562-AM&

R431005176 FOLLOWER RELAYAIR-H-5

R431005177 FOLLOWER RELAYAIR-H-5

R431005178 PISTON RELAYAIR-H-5

R431005185 ROTAIR-7P-COVER-PINNED

R431005192 CLUTCH HOUSING ROTAIR-7P-8S

R431005193 CLUTCH ROTAIR-7P-8S-DETENT-& R431005194 CLUTCH ROTAIR-7P-8S-DETENT-&

R431005195 RELAYAIR-H-5-D-3-200-140-15LB

R431005198 DOWEL PIN 0.1875X0.75-HIGH CAR&

R431005207 CLIP FLEXAIR-INTERNAL-HAI&

R431005208 FLEXAIR-2D-BS-1

R431005210 HANDLE FLEXAIR-W/KNOB

R431005211 HANDLE FLEXAIR-W/KNOB

R431005212 HANDLE FLEXAIR-W/KNOB

R431005216 ACTUATOR A-2-H PORTION 3-15 P&

R431005217 ACTUATOR A-2-H CP 3-15 PSI

R431005230 FILTER ROTAIR-P

R431005235 CARTRIDGE POWERMASTER

R431005238 CARTRIDGE POWERMASTER

R431005245 VALVE SEAT ROTAIR-7P-5S

R431005246 VALVE SEAT ROTAIR-8P-1S

R431005248 REPAIR KIT TRANS CYL 2POS

R431005249 REPAIR KIT TRANS CYL 3POS

R431005250 REPAIR KIT TRANS CYL 4POS

R431005253 ELEC-TRANS-CONTROLLER-24VDC-MODEL-DP8000

R431005261 LINEAR POSITIONER TYPE C SPRING CENT ACT

R431005263 REPAIR KIT FLEXAIR

R431005265 COMPRESSION SPRING 0.192X1.26X3.56-(M-6&

R431005324 FEMALE CONNECTOR 4-POLE

R431005327 MALE CONNECTOR ELEC-TRANS-CONTROLLER

R431005355 COMPRESSION SPRING 0.038X0.442X0.875-(M&

R431005364 VALVE PLUG PILOTAIR-A

R431005367 SHAFT ROTAIR-P

R431005368 LEVER ROTAIR-P

R431005369 SWITCH ROTAIR-P

R431005370 SWITCH ROTAIR-P

R431005371 SWITCH ROTAIR-P

R431005375 COMPRESSION SPRING 0.051X0.369X1.875-(M&

R431005377 HANDLE FLEXAIR-12-SHORT

R431005378 HANDLE FLEXAIR-20.875

R431005379 HANDLE FLEXAIR-16

R431005381 HANDLE FLEXAIR-7.25

R431005385 KNOB FLEXAIR

R431005395 REPAIR KIT TASKMASTER-BASIC

R431005396 REPAIR KIT TASKMASTER-REMOTE-OP&

R431005397 REPAIR KIT TASKMASTER-REMOTE-OP&

R431005400 FLEXAIR-1G-BD-2-CAV-#1-#2

R431005402 PILOTAIR-2-HA-2-L/HDL-KNOB

R431005405 HANDLE M-PLUS

R431005410 REPAIR KIT QRV-1/4-3/8-DIAPH-NO&

R431005411 REPAIR KIT QRV-1/4-3/8

R431005412 REPAIR KIT QRV-1/2-NBR-DIAPH-W/& R431005413 REPAIR KIT QRV-1/2-W/DIA-W/GSKT

R431005414 REPAIR KIT QRV-3/4-1-DIAPH-NITR&

R431005415 REPAIR KIT QRV-3/4-1

R431005418 COMPRESSION SPRING 0.177X1.26X4.208-(M-&

R431005428 ADJUSTING SCREW F/TYPE A ACTUATOR

R431005429 ASSEMBLY PUSH ROD & FOLLOWER &

R431005432 SPACER F/TYPE A ACTUATOR

R431005433 PIN 3.375-(M-303-12)

R431005436 ACTUATOR AA-1 1/4 ROD EYE

Our company primarily deals in European and American brands, and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, HIRSCHMANN industrial switches, Henschler, MURR, SCHMERSAL, SAMSON, and EPRO (a subsidiary of Emerson).

We also source American brands such as MOOG, ASCO solenoid valves, MAC solenoid valves, NUMATICS, PARKER pneumatics and hydraulics, VICKERS, and Helon Norgren. Italian brands OMAL, ATOS, CAMOZZI, UNIVER, and Camozzi.