ATOS solenoid valve SDHI-0711 10S in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Fields

Chemical, Petroleum, Energy, Electrical, Comprehensive

ATOS Solenoid Valve SDHI-0711 10S in Stock

Thank you for your interest in our products. If you would like to learn more, such as the price and specifications of Italian ATOS products, please feel free to contact us. We sincerely invite you to experience our satisfactory service!

The ATOS solenoid valve has a sealed chamber with through-holes at different positions. Each hole connects to a different oil pipe. In the center of the chamber is a piston, and on either side are two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side. By controlling the movement of the valve body, different drain holes are opened or closed. The inlet hole is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the current to the electromagnets controls the mechanical movement.

ATOS Solenoid Valve Media Characteristics

1) Different types of solenoid valves are selected for gaseous, liquid, or mixed states.

2) Different specifications of products are required for different media temperatures; otherwise, the coil will burn out, the seals will age, and the lifespan will be severely affected.

3) Media viscosity is typically below 50 cSt. If it exceeds this value, use a multi-functional solenoid valve for a nominal diameter greater than 15 mm; use a high-viscosity solenoid valve for a nominal diameter less than 15 mm.

4) When the media cleanliness is not high, a backflush filter valve should be installed before the solenoid valve. For low pressure, a direct-acting diaphragm solenoid valve can be selected.

5) If the media flows in a directional manner and backflow is not allowed, a bidirectional flow valve is required.

6) The media temperature should be selected within the allowable range of the solenoid valve. ATOS Solenoid Valve Installation Method

1. Selecting the Solenoid Valve Based on Pipeline Parameters: Nominal Diameter (DN) and Connection Type

1) Determine the nominal diameter (DN) based on the inner diameter of the pipeline or flow requirements.

2) For connection type, generally, >DN50 requires a flange connection; ≤DN50 can be selected freely according to user needs.

2. Selecting the Solenoid Valve Based on Fluid Parameters: Material and Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-Temperature Fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves should be chosen.

3) Fluid State: Fluids can be gaseous, liquid, or mixed, especially for diameters greater than DN25, which must be clearly distinguished.

4) Fluid Viscosity: Generally, below 50 cSt, any valve can be selected; if it exceeds this value, a high-viscosity solenoid valve should be selected. 3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structure

1) Nominal Pressure: This parameter has the same meaning as other general-purpose valves, determined by the nominal pressure of the pipeline.

2) Working Pressure: If the working pressure is low, a direct-acting or step-direct-acting principle must be selected. For working pressure differentials above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected.

4. Electrical Selection: AC220V and DC24V voltage specifications should be prioritized for convenience.

5. Selecting Based on Continuous Working Time: Normally Closed, Normally Open, or Continuously Energized

1) When the solenoid valve needs to be open for a long time, and the continuous time is longer than the closing time, a normally open type should be selected.

2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected.

3) However, for some safety protection applications, such as furnace and kiln flame monitoring, normally open valves cannot be selected; a continuously energized type should be chosen. 6. Select auxiliary functions according to environmental requirements: explosion-proof, backflow preventer, manual operation, waterproof mist, water spray, and diving protection.

DHI-0713-X 24DC 23/PE

DHI-0714/WP-X 230/50/60AC

DHI-0714/WP-X 230/50/60AC 23 /PE

DHI-0714-X 230/50/60AC

DHI-0714-X 24DC

DHI-0715/FI/NC-X 24DC

DHI-0715-X 24DC

DHI-0716-X 24DC

DHI-0717-X 24DC

DHI-0718-X 230/50/60AC

DHI-0718-X 24DC

DHI-0750/2-X 24DC

DHI-0751/2/FI/NC-X 24DC 23 DHI-0751/2/FI/NO-X 24DC 23

DHI-0751/2/WP-X 230/50/60AC

DHI-0751/2/WP-X 230/50/60AC 23/PE

DHI-0751/2/WP-X 24DC

DHI-0751/2-X 110/50/60AC 23

DHO-07191-X 24DC

DHO-0750/2-X 24DC 20

DHU-0610-X 48DC 20

DHU-0611-X 24DC

DHU-0614/A-X 24DC 20

DHU-0614-X 24DC 20

DHU-06191-X 24DC 20 DHU-06194-X 24DC 20

DHU-0630/2/A-X 24DC

DHU-0630/2-X 24DC

DHU-0631/2/A-X 24DC

DHU-0631/2/FC-X 24DC 20

DHU-0631/2-X 24DC

DHU-07119-X 24DC 20

DHU-0711-X 24DC

DHU-0713/1-X 24DC

DHU-0713/WP-X 24DC 20

DHU-0713P-X 24DC 20

DHU-0713-X 24DC

DHU-07149-X 24DC 20

DHU-0714-X 24DC DHU-0718-X 24DC

DHU-0750/2/FI/NC-X 24DC 20

DHU-0750/2-X 24DC

DHU-0751/2-00 20 /WG

DHU-0751/2P-X 24DC 20

DHU-0751/2-X 24DC

DHU-6751/2P-X 24DC

DKI-1618-X 24DC 24

DKI-1630/2/A-X 24DC 24

DKI-1630/2-X 24DC

DKI-1631/2/A-X 24DC 24

DKI-1631/2/WP 24DC

DKI-17116-X 24DC

DKI-17119-X 110/50/60AC 24

DKI-17119-X 230/50/60AC

DKI-1711-X 110/50/60AC 24

DKI-1711-X 230/50/60AC

DKI-1711-X 24DC

Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi