ATOS solenoid valve SCLI-40316 in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Chemical, Petroleum, Mining, Road/Rail/Marine, Comprehensive

ATOS Piston Pumps, ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders, ATOS Relief Valves

ATOS Solenoid Valve Working Principle:

The ATOS solenoid valve has a sealed chamber with through-holes at different positions, each connecting to a different oil pipe. In the center of the chamber is a piston, and on either side are two electromagnets. When the coil of one electromagnet is energized, the valve body is attracted to that side. By controlling the movement of the valve body, different drain holes are opened or closed. The inlet hole is always open, allowing hydraulic oil to enter different drain pipes. The oil pressure then pushes the piston in the cylinder, which in turn moves the piston rod, which in turn drives the mechanical device. Thus, controlling the current to the electromagnets controls the mechanical movement.

ATOS Solenoid Valve Selection Criteria:

1. Selection of Solenoid Valve Based on Pipeline Parameters: Nominal Diameter (DN), Connection Type

1) Determine the nominal diameter (DN) based on the inner diameter of the pipeline or flow requirements.

2) Connection type: Generally, for DN > 50, a flange connection should be selected; for DN ≤ 50, the connection type can be freely selected according to user needs.

2. Selection of Solenoid Valve Based on Fluid Parameters: Material, Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-Temperature Fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves should be chosen.

3) Fluid State: Fluids can be gaseous, liquid, or mixed, especially for diameters greater than DN 25, which must be clearly distinguished.

4) Fluid Viscosity: Generally, any fluid can be selected below 50 cSt; if it exceeds this value, a high-viscosity solenoid valve should be selected. 3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structure

1) Nominal Pressure: This parameter has the same meaning as other general-purpose valves, determined by the nominal pressure of the pipeline.

2) Working Pressure: If the working pressure is low, a direct-acting or step-direct-acting principle must be selected. For a minimum working pressure difference of 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected.

4. Electrical Selection: AC220V and DC24V voltage specifications should be prioritized for convenience.

5. Selecting Based on Continuous Working Time: Normally Closed, Normally Open, or Continuously Energized

1) When the solenoid valve needs to be open for a long time, and the continuous time is longer than the closing time, a normally open type should be selected.

2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected.

3) However, for some safety protection applications, such as furnace and kiln flame monitoring, normally open valves cannot be selected; a continuously energized type should be chosen. 6. Select auxiliary functions according to environmental requirements: explosion-proof, backflow preventer, manual operation, waterproof mist, water spray, and diving protection.

ATOS Solenoid Valve Stock List:

DHU-0610/A-X 24DC 20

DHU-0610/FI/NC-X 24DC 20

DHU-0610-X 24DC 20

DHU-0610-X 48DC 20

DHU-0611-X 24DC

DHU-0614/A-X 24DC 20

DHU-0614-X 24DC 20

DHU-06191-X 24DC 20

DHU-06194-X 24DC 20

DHU-0630/2/A-X 24DC

DHU-0630/2-X 24DC

DHU-0631/2/A-X 24DC

DHU-0631/2/FC-X 24DC 20 DHU-0631/2-X 24DC

DHU-0632/2/A-X 24DC 20

DHU-0632/2-X 24DC 20

DHU-0639/C-X 24DC 20

DHU-0671-X 24DC

DHU-0710/L1-X 24DC 20

DHU-0710-X 24DC

DHU-0711/WP-X 24DC 20

DHU-07119-X 24DC 20

DHU-0711-X 24DC

DHU-0713/1-X 24DC

DHU-0713/WP-X 24DC 20

DHU-0713P-X 24DC 20

DHU-0713-X 24DC DHU-07149-X 24DC 20

DHU-0714-X 24DC

DHU-0718-X 24DC

DHU-0750/2/FI/NC-X 24DC 20

DHU-0750/2-X 24DC

DHU-0751/2-00 20 /WG

DHU-0751/2P-X 24DC 20

DHU-0751/2-X 24DC

DHU-6751/2P-X 24DC

DKI-1610/A-X 24DC 24

DKI-1610-X 24DC

DKI-1611-X 24DC

DKI-1612/A-X 230/50/60AC 24

DKI-1612-X 24DC 24 DKI-1613/A-X 24DC 24

DKI-1613-X 24DC 24

DKI-1618-X 24DC 24

DKI-1630/2/A-X 24DC 24

DKI-1630/2-X 24DC

DKI-1631/2/A-X 24DC 24

DKI-1631/2/WP 24DC

DKI-1631/2/WP-X 230/50/60AC 24

DKI-1631/2-X 230/50/60AC 24

DKI-1631/2-X 24DC

DKI-1632/2/AFI/NC-X 24DC 24

DKI-1632/2/A-X 24DC 24 DKI-1671-X 24DC 24

DKI-1710-X 24DC

DKI-1711/WP-X 24DC 24

DKI-17116-X 24DC

DKI-17119-X 110/50/60AC 24

DKI-17119-X 230/50/60AC

DKI-1711-X 110/50/60AC 24

DKI-1711-X 230/50/60AC

DKI-1711-X 24DC

DKI-1713/1-X 24DC 24

DKI-1713/WP-X 230AC

DKI-1713-X 230/50/60AC

DKI-1713-X 24DC DKI-1714-X 110/50/60AC 24

DKI-1714-X 24DC

DKI-1715-X 230/50/60AC 24

Our company mainly deals in European and American brands and can source brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, AVENTICS, HYDAC, PILZ relays, FESTO, IFM door sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi