ATOS solenoid valve AGAM-10/210/V available in Shanghai.

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Environmental Protection, Chemical Industry, Bio-industry, Petroleum, Pharmaceutical/Biopharmaceutical

ATOS Solenoid Valve AGAM-10/210/V Shanghai In Stock

ATOS Gear Pumps, ATOS Axial Piston Pumps, ATOS Vane Pumps, ATOS Hydraulic Cylinders, ATOS Relief Valves, ATOS Proportional Valves, ATOS Stack Valves

Thank you for your interest in our products. If you would like to learn more, such as the price and specifications of Italian ATOS products, please feel free to contact us. We sincerely invite you to experience our satisfactory service!

ATOS Solenoid Valve Selection Criteria:

1. Select the solenoid valve based on pipeline parameters: nominal diameter (DN) and connection method

1) Determine the nominal diameter (DN) according to the inner diameter of the pipeline or flow requirements on site;

2) Connection method: Generally, >DN50 requires a flange connection, while ≤DN50 can be freely selected according to user needs.

2. Selecting Solenoid Valves Based on Fluid Parameters: Material and Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel valves are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended.

2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves are preferred.

3) Fluid state: Fluids can be gaseous, liquid, or mixed, especially when the diameter is greater than DN25, these must be clearly distinguished.

4) Fluid viscosity: Generally, any viscosity can be selected below 50 cSt. If it exceeds this value, a high-viscosity solenoid valve should be selected.

3. Selecting Solenoid Valves Based on Pressure Parameters: Principle and Structural Types

1) Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined by the nominal pressure of the pipeline.

2) Working pressure: If the working pressure is low, a direct-acting or step-direct-acting principle valve must be selected; when the minimum working pressure difference is above 0.04 MPa, direct-acting, step-direct-acting, and pilot-operated valves can all be selected. 4. Electrical Selection: AC220V or DC24V voltage specifications are preferred for ease of use.

5. Selection Based on Continuous Operating Time: Normally Closed, Normally Open, or Continuously Powered

1) When the solenoid valve needs to be open for a long time, and the duration is longer than the closing time, a normally open type should be selected.

2) If the opening time is short or the opening and closing times are infrequent, a normally closed type should be selected.

3) However, for some safety protection applications, such as furnace and kiln flame monitoring, a normally open type cannot be selected; a continuously powered type should be chosen.

6. Selection of Auxiliary Functions Based on Environmental Requirements: Explosion-proof, Check Valve, Manual Operation, Water-resistant Fog, Water Spray, Submersible.

ATOS Solenoid Valve Stock List:

DHI-0631/2/A-X 230/50/60AC 23

DHI-0631/2/P-X 24DC

DHI-0631/2/WP-X 12DC 23

DHI-0631/2/WP-X 220DC 23

DHI-0631/2/WP-X 230/50/60AC

DHI-0631/2P/A-X 24DC

DHI-0631/2P-X 24DC

DHI-0631/2-X 230/50/60AC

DHI-0713-X 110/50/60AC

DHI-0713-X 230/50/60AC

DHI-0713-X 24DC

DHI-0713-X 24DC 23/PE

DHI-0714/WP-X 230/50/60AC

DHI-0714/WP-X 230/50/60AC 23 /PE

DHI-0714-X 230/50/60AC

DHI-0714-X 24DC

DHI-0715/FI/NC-X 24DC

DHI-0715-X 24DC

DHI-0716-X 24DC

DHI-0717-X 24DC

DHI-0718-X 230/50/60AC

DHI-0718-X 24DC

DHI-0750/2-X 24DC

DHI-0751/2/FI/NC-X 24DC 23 DHI-0751/2/FI/NO-X 24DC 23

DHI-0751/2/WP-X 230/50/60AC

DHI-0751/2/WP-X 230/50/60AC 23/PE

DHI-0751/2/WP-X 24DC

DHI-0751/2-X 110/50/60AC 23

DHI-0751/2-X 230/50/60AC

DHI-0751/2-X 24DC

DHO-0630/2/A-X 24DC 20

DHO-0631/2/A-X 24DC 20

DHO-0631/2/L1-X 24DC 20

DHO-0631/2-X 24DC DHO-0639/O-X 24DC 20

DHO-0710-X 24DC 20

ATOS solenoid valves are electromagnetically controlled industrial devices, fundamental components of automation systems used to control fluids. They are actuators, not limited to hydraulic or pneumatic systems. Used in industrial control systems to adjust the direction, flow rate, speed, and other parameters of the medium. Solenoid valves can be used with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each playing a different role in the control system. Commonly used types include check valves, safety valves, directional control valves, and speed control valves.

Our company primarily deals with European and American brands, and can source brands from any European country. For example, our key German brands include: FESTO, BURKERT, BOSCH-REXROTH, IFM, TURCK, P+F, BALLUFF, SICK, HIRSCHMAN, MURR, HYDAC, GSR, CROUZET, E+H, PILZ, HAWE, SIEMENS, STAUFF, EUCHNER, EMG, UNIVER, ATOS, NORGREN, and approximately 500 other European brands of varying sizes. We have cooperative relationships with approximately 500 other European brands.

We also have companies in the US, and we cooperate with approximately 200 brands, including ASCO, Vickers, MAC, Parker, MOOG, Fairchild, Denison, Ross, UE, MTS, and GEFRAN.

We have distribution rights for Japanese brands, such as CKD, TOYOOKI, NACHI, DAIKIN, SMC, KOGANEI, TACO, NOK, and TOKIMEC.