ATOS proportional valve DKZOR-A-173-L5/Y in stock

Brand

ATOS/Italian Atos

Differences between ATOS proportional valves and servo valves;

Mainly in the following aspects:

1. Different drive devices. The drive device for proportional valves is a proportional electromagnet; the drive device for servo valves is a force motor or torque motor;

2. Different performance parameters. Characteristics such as hysteresis, dead zone, bandwidth, and filtration accuracy differ, thus their applications differ. Servo valves and servo proportional valves are mainly used in closed-loop control systems, while other types of proportional valves are mainly used in open-loop control systems and closed-loop speed control systems;

2.1 Servo valves have no dead zone at mid-position, while proportional valves do;

2.2 Servo valves have a higher frequency response (response frequency), up to around 200Hz, while proportional valves generally have a maximum frequency of tens of Hz;

2.3 Servo valves have higher requirements for hydraulic oil, requiring fine filtration to prevent clogging, while proportional valves have lower requirements;

3. Different valve core structure and machining precision. Proportional valves use a valve core + valve body structure, with the valve body also serving as the valve sleeve. Servo valves and servo proportional valves use a valve core + valve sleeve structure.

4. Different neutral position functions. Proportional directional valves have neutral position functions similar to ordinary directional valves, while servo valves only have an O-type neutral position function (E-type for Rexroth products).

5. Different rated pressure drops.

ATOS proportional valves are a type of proportional valve used to control flow rate and direction.

Extended Information---Automatic control of electrical proportional valves can be divided into intermittent control and continuous control. Intermittent control is on/off control. Pneumatic control systems use on/off directional valves with low operating frequencies to control the opening and closing of the air path. Pressure reducing valves regulate the required pressure, and throttle valves regulate the required flow rate. This traditional pneumatic control system requires multiple pressure reducing valves, throttle valves, and directional valves to achieve multiple output forces and multiple movement speeds. This not only increases the number of components, raising costs and complicating the system structure, but also requires many components to be manually adjusted in advance. Electro-proportional valve control is a type of continuous control, characterized by output that changes proportionally to input, with a certain proportional relationship between the two. Proportional control can be open-loop or closed-loop.

ATOS Proportional Valve Structure and Principle:

When the input signal increases, the pilot valve 1 of the supply solenoid valve switches, while the exhaust solenoid pilot valve 7 remains in the reset state. The supply pressure then enters the pilot chamber 5 through the SUP port and valve 1. The pressure in the pilot chamber rises, acting on the diaphragm 2. This opens the supply valve core 4 connected to diaphragm 2, while the exhaust valve core 3 closes, generating output pressure. This output pressure is fed back to the control loop 8 via pressure sensor 6. Here, a rapid comparison and correction is performed with the target value until the output pressure is proportional to the input signal, thus demonstrating that the output pressure changes proportionally to the input signal. Because there is no nozzle-baffle mechanism, the valve is insensitive to impurities and has high reliability.

ATOS Proportional Valve Features:

1) It can achieve stepless adjustment of pressure and speed, avoiding the impact phenomenon during switching of normally open on/off valves.

2) Enables remote and program-based control.

3) Compared to intermittent control, the system is simplified with a significant reduction in components.

4) Compared to hydraulic proportional valves, it is smaller, lighter, simpler in structure, and lower in cost, but its response speed is much slower than hydraulic systems, and it is more sensitive to load changes.

5) It uses less power, generates less heat, and produces less noise.

6) It will not cause a fire and will not pollute the environment. It is less affected by temperature changes.

ATOS proportional valve

DHZO-T-051-L1

DHZO-T-051-L5 31

DHZO-T-071-D5

DHZO-T-071-L5

DHZO-T-071-S5

DHZO-TE-051-L5/Y 40

DHZO-TE-071-L5

DHZO-TE-071-S5 40/PE

DHZO-TE-073-S5

DKZA-A-173-L5/PA-M/7

DKZO-A-151-S5

DKZO-A-171-L5

DKZO-A-173-S5

DKZOR-A-151-S5

DKZOR-A-151-S5/18 40 DKZOR-A-151-S5/B

DKZOR-A-153-L5/B

DKZOR-A-171-D5 40

DKZOR-A-171-L5

DKZOR-A-171-S5

DKZOR-A-171-S5/18

DKZOR-A-173-D5

DKZOR-A-173-L5

DKZOR-A-173-L5/18 40

DKZOR-A-173-L5/Y

DKZOR-A-173-S3

DKZOR-A-173-S5

DKZOR-A-173-S5/18

DKZOR-AE-171-L5 10

DKZOR-AE-171-S5 DKZOR-AE-171-S5 10/WG

DKZOR-AE-171-S5/Y 10

DKZOR-AE-173-D5 10

DKZOR-AE-173-L5 10

DKZORC-A-151-S5/18

DKZOR-T-151-L5

DKZOR-T-151-L5/Y

DKZOR-T-153-L5

DKZOR-T-171-D5

DKZOR-T-171-L5

DKZOR-T-171-S5

DKZOR-T-171-S5/Y

DKZOR-T-173-L5 40

DKZOR-TE-170-L5 40

DKZOR-TE-171-L5 DKZOR-TE-171-L5/I 40

DKZOR-TE-171-S5

DKZOR-TE-171-S5/Y

DKZOR-TE-173-L5 40

Our company mainly deals in European and American brands and can purchase brands from any European country. For example, our advantageous German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson's subsidiary), MOOG (USA), ASCO (USA), MAC (USA), NUMATICS (USA), PARKER (USA), VICKERS (USA), ROSS (USA), Norgren (UK), OMAL (Italy), ATOS (Italy), CAMOZZI (Italy), UNIVER (Italy), and Camozzi (Italy).