ATOS proportional valve AGMZA/M-A-010/80/M explosion-proof type
$433.09
In thermal power plant units, when the boiler's forced and induced draft fans malfunction, causing the furnace to be under excessively high induced draft head, and simultaneously, due to a rapid decrease in fuel input or a total fuel trip, the flue gas and pressure in the furnace drop sharply, this combination of adverse conditions can lead to furnace implosion (collapse). Installing superconducting magnetic pre-tightening explosion-proof valves on the boiler body and the flue gas duct before the dust collector can allow air to be supplied to the boiler and flue gas duct in advance in case of implosion, thus preventing furnace deformation and flue gas explosion.
Brand
ATOS/Italian Atos
ATOS proportional valves control flow in two ways: On-off control and Continuous control. On-off control means the valve is either fully open or fully closed, with the flow rate either at its maximum or minimum, without intermediate states. Examples include ordinary solenoid direct-flow valves, solenoid directional valves, and electro-hydraulic directional valves. Continuous control allows the valve to open to any desired degree, thus controlling the flow rate. These valves can be manually controlled (e.g., throttle valves) or electrically controlled (e.g., proportional valves and servo valves). Therefore, the purpose of using proportional or servo valves is to achieve throttling control of flow rate electrically (pressure control can also be achieved through structural modifications). Since it's throttling control, there is inevitably energy loss. Servo valves differ from other valves in that their energy loss is greater because they require a certain flow rate to maintain the operation of the pre-stage control circuit.
ATOS proportional valves actually have many disadvantages: high energy consumption, prone to failure, poor contamination resistance, high price, etc. Their only advantage is that their dynamic performance is the highest among all hydraulic valves. Because of this advantage, servo valves are indispensable in many applications with high dynamic performance requirements, such as aircraft and rocket steering control, and steam turbine speed regulation. For applications with lower dynamic requirements, proportional valves are generally preferred.
Generally speaking, servo systems seem to be closed-loop control, while proportional valves are mostly used for open-loop control. Secondly, proportional valves come in more types, including proportional pressure and flow control valves, offering more flexible control than servo valves. Internally, servo valves are mostly zero-overlap, while proportional valves have a certain dead zone, resulting in lower control accuracy and slower response. However, looking at development trends, especially in proportional directional flow control valves and servo valves, the performance difference between the two is gradually narrowing. Furthermore, proportional valves are significantly cheaper than servo valves and have stronger resistance to contamination!
ATOS Proportional Valve Structure and Principle
When the input signal increases, the pilot valve 1 of the supply solenoid valve switches, while the exhaust solenoid pilot valve 7 is in the reset state. The supply pressure then enters the pilot chamber 5 from the SUP port through valve 1. The pilot chamber pressure rises, and the air pressure acts on the diaphragm 2, causing the supply valve core 4 connected to diaphragm 2 to open, while the exhaust valve core 3 closes, generating output pressure. This output pressure is fed back to the control loop 8 via pressure sensor 6. Here, a rapid comparison and correction is performed with the target value until the output pressure is proportional to the input signal, thus demonstrating that the output pressure changes proportionally to the change in the input signal. Because there is no nozzle-baffle mechanism, the valve is insensitive to impurities and has high reliability.
ATOS proportional valve
DKZOR-A-173-S5/18
DKZOR-AE-171-L5 10
DKZOR-AE-171-S5
DKZOR-AE-171-S5 10/WG
DKZOR-AE-171-S5/Y 10
DKZOR-AE-173-D5 10
DKZOR-AE-173-L5 10
DKZORC-A-151-S5/18
DKZOR-T-151-L5
DKZOR-T-151-L5/Y
DKZOR-T-153-L5
DKZOR-T-171-D5
DKZOR-T-171-L5
DKZOR-T-171-S5
DKZOR-T-171-S5/Y DKZOR-T-173-L5 40
DKZOR-TE-170-L5 40
DKZOR-TE-171-L5
DKZOR-TE-171-L5/I 40
DKZOR-TE-171-S5
DKZOR-TE-171-S5/Y
DKZOR-TE-173-L5 40
The company mainly deals in European and American brands. We can source brands from any European country, including leading German brands such as: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)
American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS
British brands: Norgren
Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi.
