ATOS Italian piston pump PVPC-LZQZ-5073/1D 11 in stock
$120.92
The Italian ATOS piston pump operates by utilizing the volume change generated by the reciprocating motion of a piston parallel to the drive shaft within a piston bore. Because both the piston and the piston bore are circular parts, they can be machined to achieve very high precision, resulting in advantages such as high volumetric efficiency, smooth operation, good flow uniformity, low noise, and high working pressure. However, it is more sensitive to hydraulic oil contamination, has a more complex structure, and is more expensive.
Brand
ATOS/Italian Atos
Application Areas
Environmental Protection, Biotechnology, Petroleum, Pharmaceuticals/Biopharmaceuticals, General Industry
ATOS Piston Pumps, ATOS Hydraulic Pumps, ATOS Proportional Valves
The Italian ATOS piston pump is a piston pump in which the reciprocating motion of the piston or plunger is parallel to the central axis of the cylinder. Axial piston pumps utilize the volume change generated by the reciprocating motion of a plunger parallel to the drive shaft within the plunger bore. Because both the plunger and the plunger bore are circular parts, high precision fitting can be achieved during machining, resulting in high volumetric efficiency, smooth operation, good flow uniformity, low noise, and high working pressure. However, they are more sensitive to hydraulic oil contamination. The Italian ATOS piston pump is an important device in a hydraulic system. It relies on the reciprocating motion of the plunger within the cylinder to change the volume of the sealed working cavity, thereby achieving oil suction and pressure. Piston pumps, with their advantages of high rated pressure, compact structure, high efficiency, and convenient flow regulation, are widely used in high-pressure, high-flow-rate applications requiring flow control, such as hydraulic presses, construction machinery, and ships.
The Italian ATOS piston pump is an important component of a hydraulic system. It achieves oil suction and pressure by changing the volume of the sealed working cavity through the reciprocating motion of the piston within the cylinder. Piston pumps, with their advantages of high rated pressure, compact structure, high efficiency, and convenient flow regulation, are widely used in high-pressure, high-flow-rate applications requiring flow control, such as hydraulic presses, construction machinery, and ships.
The Italian ATOS piston pump is an important component of a hydraulic system. It achieves oil suction and pressure by changing the volume of the sealed working cavity through the reciprocating motion of the piston within the cylinder.
The Italian ATOS piston pump undergoes reciprocating motion within the cylinder, resulting in a large amount of movement and the need to withstand significant friction during operation. Therefore, the piston requires high hardness, wear resistance, long service life, and high precision. Research has shown that quenching heat treatment can meet the technical requirements of the piston. Quenching is a heat treatment process in which steel is heated to a temperature above the critical temperature Ac3 (hypoeutectoid steel) or Ac1 (hypereutectoid steel), held at that temperature for a period of time to achieve complete or partial austenitization, and then rapidly cooled at a rate greater than the critical cooling rate to below Ms (or isothermally near Ms) to induce martensitic (or bainitic) transformation. Quenching is widely used in modern machinery manufacturing. Almost all important parts in machinery, especially steel components used in automobiles, aircraft, and rockets, undergo quenching.
Italian ATOS Piston Pumps
Italian ATOS piston pumps use a pneumatically pressurized hydraulic oil tank. After each machine start-up, the hydraulic oil tank must reach the required pressure before operation. Straight-shaft swashplate piston pumps are divided into two types: pressure-fed and self-priming. Pressure-fed hydraulic pumps mostly use a pressurized oil tank, while some have a built-in supplementary pump that supplies pressurized oil to the pump inlet. Self-priming hydraulic pumps have strong self-priming capabilities and do not require external oil supply. For self-priming piston pumps, the hydraulic oil level in the tank must not fall below the lower limit of the oil level gauge; a sufficient quantity of hydraulic oil must be maintained. The higher the cleanliness of the hydraulic oil, the longer the service life of the hydraulic pump.
Common models of Italian ATOS plunger pumps:
PVPC-C-3029/1D
PVPC-C-3029/1D 11 /WG
PVPC-C-4046/1D
PVPC-C-4046/1S
PVPC-C-5073/1D
PVPC-C-5073/1S 10
PVPC-CH-5073/1D-IX 24DC
PVPC-CZ-5073/1D 12
PVPC-LQZ-5073/1D 11
PVPC-LW-4046/1D 10
PVPC-LZQZ-3029/1D
PVPC-LZQZ-3029/1D/18
PVPC-LZQZ-4046/1D PVPC-LZQZ-4046/1D/18
PVPC-LZQZ-5073/1D 11
PVPC-LZQZ-5073/1D/18
PVPC-R-3029/1D 11
PVPC-R-4046/1D 11
PVPC-SLE-3029/10 20
PVPC-SLE-4046/1D 20
PVPCX2E-C-3029/31036/1D 10
PVPCX2E-LW-3029/31036/1D 10 The company mainly deals with European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)
American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS
British brands: Norgren
Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi
