ATOS DHI-0631/2P/A solenoid valve 20 in stock

Brand

ATOS/Italian Atos

Flow Direction

Other

3C Valve Category

Industry

Application Areas

Food/Agricultural Products, Chemical Industry, Agriculture, Forestry, Animal Husbandry and Fishery, Petroleum, Comprehensive

ATOS Relief Valve, ATOS Proportional Valve, ATOS Stack Valve, ATOS Solenoid Valve

ATOS Solenoid Valve

ATOS Solenoid Valve Selection Criteria:

1. Select the solenoid valve based on pipeline parameters: nominal diameter (DN) and connection method

1) Determine the nominal diameter (DN) according to the inner diameter of the pipeline or flow requirements on site;

2) Connection method: Generally, >DN50 requires a flange connection; ≤DN50 can be freely selected according to user needs.

2. Selection of Solenoid Valves Based on Fluid Parameters: Material and Temperature Group

1) Corrosive fluids: Corrosion-resistant solenoid valves and all-stainless steel valves are recommended; Ultra-clean edible fluids: Food-grade stainless steel solenoid valves are recommended;

2) High-temperature fluids: Solenoid valves made with high-temperature resistant electrical and sealing materials should be selected, and piston-type valves are preferred;

3) Fluid state: Fluids can be gaseous, liquid, or mixed, especially for diameters greater than DN25, which must be clearly distinguished;

4) Fluid viscosity: Generally, any viscosity can be selected below 50 cSt. If the viscosity exceeds this value, a high-viscosity solenoid valve should be selected. The ATOS solenoid valve has a sealed chamber with through holes at different positions, each hole connecting to a different oil pipe. In the middle of the chamber is a piston, and on either side are two electromagnets. When the coil of one electromagnet is energized, the valve body will be attracted to that side. By controlling the movement of the valve body, different drain holes are opened or closed. The oil inlet is always open, so hydraulic oil enters different drain pipes. Then, the oil pressure pushes the piston in the cylinder, which in turn drives the piston rod, which in turn drives the mechanical device. Mechanical movement is controlled by controlling the on/off state of the electromagnet.

ATOS Solenoid Valves in Stock:

ATOS Solenoid Valve DHI-0714-X 24DC

ATOS Solenoid Valve DHI-0715/FI/NC-X 24DC

ATOS Solenoid Valve DHI-0715-X 24DC

ATOS Solenoid Valve DHI-0716-X 24DC

ATOS Solenoid Valve DHI-0717-X 24DC

ATOS Solenoid Valve DHI-0718-X 230/50/60AC

ATOS Solenoid Valve DHI-0718-X 24DC

ATOS Solenoid Valve DHI-0750/2-X 24DC

ATOS Solenoid Valve DHI-0751/2/FI/NC-X 24DC 23

ATOS Solenoid Valve DHI-0751/2/FI/NO-X 24DC 23

ATOS Solenoid Valve DHI-0751/2/WP-X 230/50/60AC

ATOS Solenoid Valve DHI-0751/2/WP-X 230/50/60AC 23 /PE

ATOS Solenoid Valve DHI-0751/2/WP-X 24DC

ATOS Solenoid Valve DHI-0751/2-X 110/50/60AC 23

ATOS Solenoid Valve DHI-0751/2-X 230/50/60AC

ATOS Solenoid Valve DHI-0751/2-X 24DC

ATOS Solenoid Valve DHO-0630/2/A-X 24DC 20

ATOS Solenoid Valve DHO-0631/2/A-X 24DC 20

ATOS Solenoid Valve DHO-0631/2/L1-X 24DC 20

ATOS Solenoid Valve DHO-0631/2-X 24DC

ATOS Solenoid Valve DHO-0639/O-X 24DC 20

ATOS Solenoid Valve DHO-0710-X 24DC 20

ATOS Solenoid Valve DHO-0711-X 24DC

ATOS Solenoid Valve DHO-0713-X 24DC 20

ATOS Solenoid Valve DHO-07191-X 24DC

Main Classifications of ATOS Solenoid Valves

1. Solenoid valves are classified into three main categories based on their operating principle:

1) Direct-acting solenoid valves:

Principle: When energized, the electromagnetic coil generates electromagnetic force to lift the closing element from the valve seat, opening the valve; when de-energized, the electromagnetic force disappears, and the spring presses the closing element back onto the valve seat, closing the valve.

Features: Can operate normally under vacuum, negative pressure, and zero pressure, but the nominal diameter is generally no more than 25mm.

The company primarily deals with European and American brands, and can source brands from any European country. For example, its key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson subsidiaries)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi

Our business scope includes:

Hydraulic components such as:

Solenoid directional valves, directional valves, check valves, stack valves, relief valves, counterbalancing valves, proportional valves, manual directional valves, flow valves, pressure reducing valves

Throttle valves, pressure control valves, back pressure valves, filling valves, flow dividers, shuttle valves, pressure relays, cartridge valves, pneumatic valves, piston pumps

Gear pumps, vane pumps, cycloidal hydraulic motors, oil coolers, hydraulic cylinders, etc. Pneumatic components include:

Air source processor assemblies, filters, pressure regulating valves, oilers, solenoid valves, pneumatic valves, angle seat valves, manual valves, pull valves, foot valves;

Mechanical valves, check valves, vacuum generators, cylinders, magnetic switches, dampers, pressure gauges, quick couplings, floating couplings;

Pressure gauge switches, water coolers, electric positioners, PU tubing, vacuum suction cups, oil filters, vibrators;

Electrical components include:

Relays, sensors, converters, proximity switches, encoders, programmable controllers;

The company maintains a large inventory, with standard parts readily available. To better serve customers in various industries, the company also distributes other spare parts, with professional sourcing channels and reasonable prices.

The company's products are widely used in industrial machinery, machine tools, plastic machinery, shoe machinery, brick machinery, metallurgy, mining, chemical industry, papermaking, coal mining, shipbuilding, etc.