ATOS amplifier E-ME-T-01H 40/DK14SC in stock

Brand

ATOS/Italian Atos

Origin Category

Imported

Application Fields

Chemical, Petroleum, Mining, Road/Rail/Shipbuilding, Comprehensive

ATOS amplifiers are devices that amplify the voltage or power of input signals. They consist of vacuum tubes or transistors, power transformers, and other electrical components. They are used in various devices such as communications, broadcasting, radar, television, and automatic control.

ATOS Amplifier Basic Introduction

ATOS amplifiers are devices that increase signal amplitude or power. They are important components in signal processing tools in automation technology. The amplification effect of an amplifier is achieved by controlling the energy source with the input signal; the power consumption required for amplification is provided by the energy source. For linear amplifiers, the output is a reproduction and enhancement of the input signal. For nonlinear amplifiers, the output has a certain functional relationship with the input signal. Amplifiers are classified according to the physical quantity of the signal they process: mechanical amplifiers and electromechanical amplifiers.

ATOS amplifiers are important components of transmitting devices in communication systems. High-frequency power amplifiers are classified into two types based on their operating frequency band: narrowband and wideband. Narrowband high-frequency power amplifiers typically use a frequency-selective circuit with frequency filtering capabilities as their output circuit, hence they are also called tuned power amplifiers or resonant power amplifiers. Wideband high-frequency power amplifiers use a transmission line transformer or other wideband matching circuits as their output circuit, therefore they are also called untuned power amplifiers. A high-frequency power amplifier is an energy conversion device that converts DC energy supplied by a power source into high-frequency AC output. As known in the course "Low-Frequency Electronic Circuits," amplifiers can be classified into three classes (A, B, and C) based on their current conduction angle. Class A amplifiers have a current conduction angle of 360°, suitable for small-signal, low-power amplification. Class B amplifiers have a current conduction angle of approximately 180°; Class C amplifiers have a current conduction angle less than 180°. Both Class B and Class C are suitable for high-power operation. Class C has the highest output power and efficiency among the three operating classes. Most high-frequency power amplifiers operate in Class C. However, Class C amplifiers exhibit excessive current waveform distortion, making them unsuitable for low-frequency power amplification. They are only suitable for resonant power amplification using a tuned circuit as the load. Because the tuned circuit possesses filtering capabilities, the circuit current and voltage remain extremely close to a sinusoidal waveform, resulting in very low distortion.

E-RI-TE-01H 40/DH04SA

E-RI-TE-01H/I 40 /DH04SA

E-RI-TE-05H 40/DK17SB

E-RP-AC-01F/I 10 /2

E-RP-AC-01F/I 10 /A1

E-RP-AC-05F 10 /4

E-ME-L-01H 40/DL27SB

E-ME-L-01H 40/PCNNSA

E-ME-L-01H/DL27SB

E-ME-L-01H/I 40/LQ32SA

E-ME-T-01H 40/DH04SA

E-ME-T-01H 40/DH05SA

E-ME-T-01H 40/DK14SC

E-ME-T-01H 40 /DK15SB

E-ME-T-01H 40/QV0NSA

E-ME-T-01H 40/TK14AA

E-ME-T-01H 40/TK14SC

E-ME-T-01H 40/TQ25SA

E-ME-T-01H 40/TQ32SA

E-ME-T-01H 40/TQ42SA

E-ME-T-01H 40/DK14SC

E-ME-T-01H 40/DK15SB

E-ME-T-01H 40/QV1NSB

E-ME-T-01H 40/TQ25SA

E-ME-T-01H/I 40 /DH04SA

E-ME-T-01H/I 40/DK14SC E-ME-T-01H/I 40 /DP25SB

E-ME-T-01H/I 40 /DP25SC

E-ME-T-01H/I 40 /QV0NSA

E-ME-T-01H/I 40/TQ25SA

E-ME-T-01H/I 40/DK15SB

E-ME-T-01H/I 40/QVONSA

E-ME-T-01H/I 40/TQ25SA

E-ME-T-05H 40/DH07SA

E-ME-T-05H 40/DK17SA

E-ME-T-05H 40/DK17SB

E-ME-T-05H 40/DP27SB

E-ME-T-05H 40/DH07SA

E-ME-T-05H 40/DK17SB

E-ME-T-05H 40/DP27SB

E-ME-T-05H/I 40 /DK17SB

ATOS Amplifier Main Principle:

An ATOS amplifier is essentially an analog Fourier transform. The output of the lock-in amplifier is a DC voltage, proportional to the amplitude of the input signal at a specific frequency (parameter input frequency). Other frequency components in the input signal will not contribute to the output voltage.

Two sinusoidal signals, both 1Hz in frequency and 90 degrees out of phase, multiplied by a multiplier, result in a sinusoidal signal with a DC bias.

If an ATOS amplifier multiplies a 1Hz signal and a 1.1Hz signal, the result is a modulated signal with a sinusoidal profile and a DC bias of 0.

Only signals with the same frequency as the reference signal* will produce a DC bias at the multiplier output; other signals will produce AC signals at the output. If a low-pass filter is added to the output of the multiplier, all AC signal components will be filtered out, leaving only the DC component whose amplitude is proportional to the specific frequency signal component in the input signal.

Main applications of ATOS amplifiers:

ATOS amplifiers are primarily used to detect weak signals with very low signal-to-noise ratios. Even if the useful signal is submerged in noise, or even if the noise signal is much larger than the useful signal, as long as the frequency of the useful signal is known, the amplitude of that signal can be accurately measured.

Our company mainly deals in European and American brands and can source brands from any European country. For example, our key German brands include: BURKERT, DEMAG, HAWE, REXROTH, HYDAC, PILZ relays, FESTO, IFM sensors, E+H, HEIDENHAIN, P+F sensors, SICK, TURCK, and HIRSCHMANN industrial switches. German brands: Hengstler, Murr, Schmersal, Samson, EPRO (Emerson Group)

American brands: MOOG, ASCO, MAC, NUMATICS, PARKER, VICKERS, ROSS

British brands: Norgren

Italian brands: OMAL, ATOS, CAMOZZI, UNIVER, Camozzi