\n

• Estimated Lead Time : 1 Weeks \n
• Manufacturer : Phoenix Contact \n
• Orderkey : 2866789 \n
• Packing unit : 1 pc \n
• Catalog page : Page 210 (C-4-2017) \n
• GTIN : 4046356421720 \n
• Weight per Piece (excluding packing) : 3,815.800 g \n
• Custom tariff number : 85044030 \n
• Country of origin : TH (Thailand) \n
• Width : 180 mm \n
• Height : 130 mm \n
• Depth : 125 mm \n
• Width with alternative assembly : 122 mm \n
• Height with alternative assembly : 130 mm \n
• Depth with alternative assembly : 183 mm \n
• Degree of protection : IP20 \n
• Ambient temperature (operation) : -25 __ ... 70 __ (> 60 __ Derating: 2.5 %/K) \n
• Ambient temperature (start-up type tested) : -40 __ \n
• Ambient temperature (storage/transport) : -40 __ ... 85 __ \n
• Max. permissible relative humidity (operation) : <= 95 % (at 25 __, non-condensing) \n
• Climatic class : 3K3 (in acc. with EN 60721) \n
• Degree of pollution : 2 \n
• Installation height : 4000 m \n
• Nominal input voltage range : 100 V AC ... 240 V AC \n: 120 V DC ... 300 V DC (UL 508 <= 250 V DC) \n
• Input voltage range : 85 V AC ... 264 V AC \n90 V DC ... 300 V DC (UL 508: <= 250 V DC) \n
• Dielectric strength maximum : 300 V AC \n
• AC frequency range : 45 Hz ... 65 Hz \n
• Frequency range DC : 0 Hz \n
• Discharge current to PE : < 3.5 mA \n
• Current consumption : 8.8 A (120 V AC) \n4.6 A (230 V AC) \n9.5 A (110 V DC) \n4.7 A (220 V__C) \n
• Nominal power consumption : 1030 W \n
• Inrush surge current : < 15 A (typical) \n
• Mains buffering : > 35 ms (120 V AC) \n: > 35 ms (230 V AC) \n
• Input fuse : 20 A (slow-blow, internal) \n
• Choice of suitable circuit breakers : 16 A ... 20 A (AC: Characteristics B, C, D, K) \n
• Type of protection : Transient surge protection \n
• Protective circuit/component : Varistor, gas-filled surge arrester \n
• Nominal output voltage : 24 V DC 1% \n
• Setting range of the output voltage (USet) : 18 V DC ... 29.5 V DC (> 24 V__C, constant capacity restricted) \n
• Nominal output current (IN) : 40 A (-25___C_...60___C, UOUT=_24____C) \n
• POWER BOOST (IBoost) : 45 A (-25___...40_ permanent, UOUT_= 24____C ) \n
• Selective Fuse Breaking (ISFB) : 215 A (12 ms) \n
• Derating : 60 __ ... 70 __ (2.5%/K) \n
• Connection in parallel : Yes, for redundancy and increased capacity \n
• Connection in series : yes \n
• Feedback resistance : max. 35 V DC \n
• Circuit breaker against surge voltage at output by invasive foreign matter : < 35 V DC \n
• Residual ripple : < 30 mVPP_(with nominal values) \n
• Output power : 960 W \n
• Typical response time : < 0.7 s \n
• Maximum power dissipation in no-load condition : 14 W \n
• Power loss nominal load max. : 80 W \n
• Net weight : 3.3 kg \n
• Efficiency : > 92 % (for 230 V AC and nominal values) \n
• Insulation voltage input/output : 4 kV AC (type test) \n
• : 2 kV AC (routine test) \n
• Insulation voltage input / PE : 3.5 kV AC (type test) \n
• : 2 kV AC (routine test) \n
• Insulation voltage output / PE : 500 V DC (routine test) \n
• Protection class : I \n
• Degree of protection : IP20 \n
• MTBF (IEC 61709, SN 29500) : > 900000 h (25 __) \n: > 530000 h (40 __) \n
• Mounting position : horizontal DIN rail NS 35, EN 60715 \n
• Assembly instructions : alignable: PN_>=50%, 5__m horizontally, 15__m next to active components, 50__m vertically \nalignable: PN_<50%, 0__m horizontally, 40__m vertically top, 20 mm vertically bottom \n
• Connection method : Screw connection \n
• Conductor cross section solid min. : 0.2 mm_ \n
• Conductor cross section solid max. : 6 mm_ \n
• Conductor cross section flexible min. : 0.2 mm_ \n
• Conductor cross section flexible max. : 4 mm_ \n
• Conductor cross section AWG min. : 14 \n
• Conductor cross section AWG max. : 10 \n
• Stripping length : 7 mm \n
• Screw thread : M3 \n
• Connection method : Screw connection \n
• Conductor cross section solid min. : 0.5 mm_ \n
• Conductor cross section solid max. : 16 mm_ \n
• Conductor cross section flexible min. : 0.5 mm_ \n
• Conductor cross section flexible max. : 16 mm_ \n
• Conductor cross section AWG min. : 8 \n
• Conductor cross section AWG max. : 6 \n
• Stripping length : 10 mm \n
• Screw thread : M4 \n
• Conductor cross section solid min. : 0.2 mm_ \n
• Conductor cross section solid max. : 6 mm_ \n
• Conductor cross section flexible min. : 0.2 mm_ \n
• Conductor cross section flexible max. : 4 mm_ \n
• Conductor cross section AWG min. : 24 \n
• Conductor cross section AWG max. : 10 \n
• Screw thread : M3 \n
• Electromagnetic compatibility : Conformance with EMC Directive 2014/30/EU \n
• Noise emission : EN 55011 (EN 55022) \n
• Noise immunity : EN 61000-6-2:2005 \n
• Connection in acc. with standard : CSA \n
• Standards/regulations : EN 61000-4-2 \n
• Contact discharge : 4 kV (Test Level 2) \n
• Standards/regulations : EN 61000-4-3 \n
• Frequency range : 80 MHz ... 1 GHz \n
• Test field strength : 10 V/m (Test Level 3) \n
• Frequency range : 1.4 GHz ... 2 GHz \n
• Test field strength : 3 V/m (Test Level 2) \n
• Standards/regulations : EN 61000-4-4 \n
• Comments : Criterion B \n
• Standards/regulations : EN 61000-4-5 \n
• Signal : 1 kV (Test Level 2 - asymmetrical) \n
• Standards/regulations : EN_61000-6-3 -- EN_61000-4-6 \n
• Frequency range : 0.15 MHz ... 80 MHz \n
• Voltage : 10 V (Test Level 3) \n
• Low Voltage Directive : Conformance with LV directive 2006/95/EC \n
• Standard - Electrical safety : IEC 60950-1/VDE 0805 (SELV) \n
• Standard-Electronic equipment for use in electrical power installations and their assembly into electrical power installations : EN 50178/VDE 0160 (PELV) \n
• Standard-Safety extra-low voltage : IEC 60950-1 (SELV) and EN 60204-1 (PELV) \n
• Standard - Safe isolation : DIN VDE 0100-410 -- DIN VDE 0106-101 \n
• Standard-Protection against shock currents, basic requirements for protective separation in electrical equipment : EN 50178 \n
• Standard-Limitation of mains harmonic currents : EN 61000-3-2 \n
• Standard - Equipment safety : BG (design tested) \n
• Standard - Approval for medical use : IEC 60601-1, 2 x MOOP \n
• Shipbuilding approval : DNV__L_(EMC__), ABS, LR, RINA, NK, BV \n
• UL approvals : UL Listed UL 508 -- UL/C-UL Recognized UL 60950-1 -- UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) \n
• Shock : 18 ms, 30g, in each space direction (according to IEC 60068-2-27) \n
• Vibration (operation) : < 15 Hz, amplitude _2.5 mm (according to IEC 60068-2-6) \n: 15 Hz ... 150 Hz, 2.3g, 90 min. \n
• Information technology equipment - safety (CB__cheme) : CB Scheme \n
• Rail applications : EN 50121-4 \n
• Overvoltage category (EN 62477-1) : III \n
• China RoHS : Environmentally Friendly Use Period = 25; \n
• Shipping Weight : 5 Kg \n